Published: 07/18/2007
| Question: | OL1 -- Fault Code Description |
| Answer: | Digital Operator Display Text: OL1 Motor Overloaded
Description: Motor Overload. Designed to protect the motor. Fully adjustable from parameter E2-01
Causes: The load is too large. The cycle time is too short at the accel/decel time - - - The voltage of the V/F pattern is high - - - Motor rated current setting is improper.
Corrective Actions: Recheck the cycle time and the size of the load as well as the times set in C1-01 and C1-02 - - - Review the V/F pattern parameters, E1-01 thru E1-13 - - - Check the motor rated current value in E2-01.
There is other related information on this FAQ, see "Link to related files" below. |
Product Information:
| Product Group: | Inverters/Drives |
| Product: | E7 Drive, E7B Drive Bypass, E7C Drive Configured, E7E Drive Engineered, E7L Drive Bypass, E7N Narrow Bypass Package, E7S Slim Configured Package, F7 Drive, P7 Drive |
| Applications: | |
| Category: | Fault Code Description |
Other Information:
SAFETY PRECAUTIONS AND INSTRUCTIONS FOR USE OF FAQ INFORMATION!
Please read and understand the product instruction manual before installing, servicing or operating Yaskawa products. FAQ content and illustrations are provided as technical advice to augment the information in manual, not superceed it. It is not possible to give detailed instructions for all types of installation or support activities. The information described in the FAQs are subject to change without notice to improve the product or FAQ. Yaskawa assumes no responsibility for errors or omissions or damages resulting from the use of the information contained in any FAQ.
All warnings, cautions and product instruction for product use must be followed. Installation, operation and maintenance should be carried out by qualified personnel. Failure to observe these and other precautions highlighted in the product manuals will expose the user to high voltages resulting in, serious injury or death. Qualified personnel are defined as individuals who are familiar with the installation, starting, operation and maintenance of Yaskawa products of the type described and have proper qualifications to perform the work.
|