Class Number: TRM010-J50 and TRM020-J50
Class Location:
Class Cost: $980

Class Topics:
This class is a more in-depth look at the J50 product. It gives experienced machine tool engineers and retrofitters a comprehensive overview of the product. This class does not teach you what a CNC is, but how to set up the J50 CNC. Class topics include but are not limited to:

	J50 Basic Class
	Connecting up the J50 CNC
	Load the standard machine sequence
	Load the standard J50 control parameters
	Choose the system options
	Perform a test run of the standard J50 system
	An introduction to part program operation
	Learn how to modify the sequence
	Overview of the Sigma Servo
	Installation and wiring of the servo
	Test run the servo
	Set-up and configuration
	Overview of the spindle drive
	Installation and wiring of the spindle
	Test run the spindle
	Load parameters
	J50 Advanced Class Working with a Sigma Servo and a VM3
	Performing a run-off with the J50
	Specifications
	Documentation-Electric drawing, parameter table, test report, ladder diagram

Class Materials: Students will receive a copy of the class training manual as well as selected product user and instruction manuals in paper and/or electronic format. Prerequisites:

Prior experience with MS DOS 6.0 and Windows 3.1 is required. Prior experience retrofitting machine tools is helpful. If you're not sure if this class is right for you, call and speak with one of Yaskawa's Product Training Engineers at 1-800-YASKAWA (927-5292) dial 4.

Class Format:
This class runs from 8:30 am to 5:00 pm each day, with a one-hour lunch and two 15-minute breaks. The class consists of approximately 60% lecture and 40% hands-on exercises.

Class Cost:
Contact Yaskawa for pricing at 1-800-YASKAWA (927-5292) dial 4.. The fee that you will be charged includes all training documents, a continental breakfast each morning, and a lunch each day. Costs associated with travel, lodging, and evening meals are not included and are the student's responsibility.

To Enroll: To enroll in any class, call Technical Training Services at 1-800-YASKAWA (927-5292) dial 4. Please have a PO ready when you call. Class sizes are limited, so call early to reserve your seat. PO must be net 30 days.

Cancellation Policy: Yaskawa reserves the right to cancel a scheduled class at anytime due to low enrollment. In this situation the student will be asked to reschedule or the tuition cost will be refunded. Yaskawa is not liable for any charges incurred by the customer (i.e.-airline, hotel, and rental car) due to cancellation.

Cancellation fee for customers: if canceling within 1 week of the scheduled class is 50% of the total.
Cancellation fee for ASC/Partners: if canceling within 1 week of the scheduled class is 100% of the total.