Class Number: TRM010-E7
Class Location:
Class Cost: $460

Class Topics:

The E7 Programming class is designed for technicians and engineers thatneed to know how to incorporate an E7 Drive into an application. Class topics include but are not limited to:

Introduction to the E7 Users Manual Keypad Navigation and Menu Structure Programming for the typical HVAC Application Including but not limited to: DC Injection Copy Keypad Bi-directional Speed Search Energy Savings Auto-Tuning Overtemperature Speed Fold-back Motor Preheating Torque Boost New PI Parameter Programming Special parameters for Fans, Pumps, and Cooling Towers Introduction to setting up Serial Communications (Metasys and Apogee) Fault Trace and Monitors DriveWizard™ Software

Class Materials: Students will receive a copy of the class training manual, as well as selected product user and instruction manuals in paper and/or electronic format. Prerequisites:

At least some prior experience with programming of any of Yaskawa Generation 7 Drives (P7, F7, G7). You should also possess a basic knowledge of motors and inverters. You'll also need to be familiar with the most recent version of DriveWizard software (Click here for download link). It is highly recommended to review the Yaskawa Electric America, Motor and Drive Basics e-Learning Module before attending this class. Click on this link to download the eLearning Module. (eLM.AFD.03.MotorandDriveBasics, 10.2MB) In addition to the eLearning module listed above, you must complete the following eLearning modules and submit the certification tests: Click on this link to download the DriveWizard (Part 1) eLearning Module and test (eLM.AFD.04, 8.6MB, 30KB) Click on this link to download the DriveWizard (Part 2) eLearning Module and test (eLM.AFD.05 (23.2MB, 30KB) If you do not have a high-speed Internet connection and would like a copy of this e-Learning Module on CD, please send an e-mail to training@yaskawa.com with your request. Please make sure to include your name, company name and address. If you're not sure if this class is right for you, call and speak with one of Yaskawa's Product Training Engineers.

Class Format:
This class runs from 8:30 to 5:00 pm each day, with a one-hour lunch and two 15-minute breaks. The class consists of approximately 50% lecture and 50% programming exercises.

Class Cost:
Contact Yaskawa for pricing. The fee that you will be charged includes all training documents, a continental breakfast each morning, and a lunch each day. Costs associated with travel, lodging, and evening meals are not included and are the student's responsibility.

To Enroll: To enroll in any class, call Technical Training Services at 847-887-7228. Please have a PO ready when you call. Class sizes are limited, so call early to reserve your seat. PO must be net 30 days.

Cancellation Policy: Yaskawa reserves the right to cancel a scheduled class at anytime due to low enrollment. In this situation the student will be asked to reschedule or the tuition cost will be refunded. Yaskawa is not liable for any charges incurred by the customer (i.e.-airline hotel, and rental car) due to cancellation.

Cancellation fee for customers: if canceling within 1 week of the scheduled class is 50% of the total.
Cancellation fee for ASC/Partners: if canceling within 1 week of the scheduled class is 100% of the total.