|
Class Number: TRM015-Z1000
Class Location: IL
Class Cost: $460
Start Date: 07/24/2012 End Date: 07/25/2012
Time: 08:30:00 AM - 05:00:00 PM Central Standard Time
If this class is what you're looking for, why not check these out too?
Class Length: Two Days
Class Topics:
The Z1000 Installation and Start-up class is designed for technicians and engineers that need to know how to install and start-up an Z1000 Drive Bypass. Class topics include but are not limited to:
- Learning the Z1000 Bypass
- Schematic Review
- Component Review
- Start-up Report
- Perform a Simple Start-up
- Bypass Operation Review
- Define advanced features
- Smoke Purge/Auto Transfer/Remote Transfer
- Loss of Load Detection
- Run Interlocking
- Energy Savings operation
- Application Stories
Class Materials:
Students will receive a copy of the class training manual as well as selected product user and instruction manuals in paper and/or electronic format.
Prerequisites:
At least some prior experience with programming of any of Yaskawa AC Drives. You should also possess a basic knowledge of motors and inverters.
It is highly recommended to review the Motor and Drive Basics e-Learning Module (Doc# eLM.AFD.03.MotorandDriveBasics) before attending this class.
In addition to the eLearning module (eLM) listed above, you must complete the following eLM and submit the certification test:
If you do not have a high-speed internet connection and would like a copy of this e-Learning Module on CD, please send an e-mail to training@yaskawa.com with your request. Include your name, company name and address. If you're not sure if this class is right for you, call and speak with one of our Product Training Engineers at 1-800-YASKAWA (927-5292) dial 4.
Class Format:
This class runs from 8:30 to 5:00 pm each day, with a one-hour lunch and two 15-minute breaks. The class consists of approximately 20% lecture and 80% hands-on exercises. Special emphasis is placed on the hands-on portion of this class.
Continuing Education Units:
Continuing Education Units will be awarded to those students that attend this training class in its entirety and successfully perform all of the book work and hands-on exercises. Yaskawa does not provide partial CEU credits for less than 100% attendance. As an IACET Authorized Provider, Yaskawa America Inc. offers CEUs for its programs that qualify under the ANSI/IACET Standard. Yaskawa America, Inc. is authorized by IACET to offer 1.4 CEUs for this program.
Class Cost:
Contact Yaskawa for pricing at 1-800-YASKAWA (927-5292) dial 4. The fee that you will be charged includes all training documents, a continental breakfast each morning, and a lunch each day. Costs associated with travel, lodging, and evening meals are not included and are the student's responsibility.
To Enroll:
To enroll in any class, call Technical Training Services at 1-800-YASKAWA (927-5292) dial 4. Please have a PO ready when you call. Class sizes are limited, so call early to reserve your seat. PO must be Net 30 days.
Cancellation Policy:
Yaskawa reserves the right to cancel a scheduled class at anytime due to low enrollment. In this situation the student will be asked to reschedule or the tuition cost will be refunded. Yaskawa is not liable for any charges incurred by the customer (i.e.-airline, hotel, and rental car) due to cancellation.
Cancellation fee for customers: if canceling within 1 week of the scheduled class is 50% of the total.
Cancellation fee for ASC/Partners: if canceling within 1 week of the scheduled class is 100% of the total.
|
Schedule |
|
|
 |
Services |
|
|
|
Details |
|
|
|
Contact Us |
|
|
|