|Question:||How can I set this AC drive so my motor can’t run below 20hz? Is it the Frequency min. parameter?|
|Answer:||The frequency minimum and maximum parameters are for setting the v/f pattern that the drive will follow. Altering these parameters will directly affect motor performance. The parameters that limit the drives output are the frequency upper and frequency lower limits. By adjusting these parameters the drive will accept any reference, but only output motor frequency between the frequency upper and frequency lower settings. These limits are set as a percentage of the total range between the frequency minimum and frequency maximum. |
|Product:||E7 Drive, F7 Drive, G5 Drive 600 Volt, G5HHP Drive, J7 Drive, P5 Drive 600 Volt, V7 Drive, V74X Drive, V7N Drive |
|Category:||Programming; Speed Control|
SAFETY PRECAUTIONS AND INSTRUCTIONS FOR USE OF FAQ INFORMATION!
Please read and understand the product instruction manual before installing, servicing or operating Yaskawa products. FAQ content and illustrations are provided as technical advice to augment the information in manual, not superceed it. It is not possible to give detailed instructions for all types of installation or support activities. The information described in the FAQs are subject to change without notice to improve the product or FAQ. Yaskawa assumes no responsibility for errors or omissions or damages resulting from the use of the information contained in any FAQ.
All warnings, cautions and product instruction for product use must be followed. Installation, operation and maintenance should be carried out by qualified personnel. Failure to observe these and other precautions highlighted in the product manuals will expose the user to high voltages resulting in, serious injury or death. Qualified personnel are defined as individuals who are familiar with the installation, starting, operation and maintenance of Yaskawa products of the type described and have proper qualifications to perform the work.