Published: 02/15/2006
| Question: | Is there a Software Release History for YTerm? |
| Answer: | YTerm is the development environment for all SMC controller products.
Currently released Version = YTerm 7.0.7
Order part number: SMCGUI1
Upgrade Information:
The YTerm Software Policy allows free upgrades for one full year (tracked by order date). To upgrade YTerm, place a no-charge purchase order with your distributor to have a full version CD shipped to you (part number SMCGUI1). After the expiration time, a new copy of YTerm will must be purchased.
Product Release History:
YTerm 7.0.7 - Official Release Dec 2005 (Windows 95/98/NT/2000/XP compatible)
Up to 16 serial ports (for USB support),
YTerm 7.0.5 - Official Release March 2005 (Windows 95/98/NT/2000/XP compatible)
YTerm 7.0.1 - Official Release Jan 2004 (Windows 95/98/NT/2000/XP compatible)
YTerm 7.0.0 - Official Release Jan 2004 (Windows 95/98/NT/2000/XP compatible)
This was the first version to support the SMC-4000.
YTerm 6.0.2 - Official Release Sept 2002.
This was the first version to support Ethernet.
YTerm 5.1.5 - Official Release in August 2001 (Windows 95/98/NT/2000 compatible)
This was the first version to support the LEGEND-MC (SMC3010)
YTerm 4.21 - Official Release in October 1999 (Windows 3.1/95/98/NT compatible)
YTerm 4.20 - Official Release in June 1999 (Windows 3.1/95/98/NT compatible)
YTerm 4.10 - Official Release in August 1998 (Windows 3.1/95 Compatible)
YTerm 3.30 - First Official Release in November 1996 (Windows 3.1 Compatible)
SMCGUI1 Contents:
The SMCGUI1 part number is the SMC Software Development kit. The kit is a boxed item that contains the CDROM, serial programming cable (SMCCBL7), a hard copy of the YTerm software manual, and a software registration mail back card. The CDROM has YTerm software and Ethernet Utilities software on it. It also contains PDF format files of the YTerm Software Manual and PDF manuals for each controller.
For more detailed information, please refer to the compiled revision history file, Readme.txt, which is included in every installation disk. |
Product Information:
| Product Group: | Motion |
| Product: | YTerm Software |
| Applications: | |
| Category: | Software; Upgrade (Software/firmware) |
Other Information:
SAFETY PRECAUTIONS AND INSTRUCTIONS FOR USE OF FAQ INFORMATION!
Please read and understand the product instruction manual before installing, servicing or operating Yaskawa products. FAQ content and illustrations are provided as technical advice to augment the information in manual, not superceed it. It is not possible to give detailed instructions for all types of installation or support activities. The information described in the FAQs are subject to change without notice to improve the product or FAQ. Yaskawa assumes no responsibility for errors or omissions or damages resulting from the use of the information contained in any FAQ.
All warnings, cautions and product instruction for product use must be followed. Installation, operation and maintenance should be carried out by qualified personnel. Failure to observe these and other precautions highlighted in the product manuals will expose the user to high voltages resulting in, serious injury or death. Qualified personnel are defined as individuals who are familiar with the installation, starting, operation and maintenance of Yaskawa products of the type described and have proper qualifications to perform the work.
|