ISO-10303-21;
HEADER;
FILE_DESCRIPTION((''),'2;1');
FILE_NAME('ASSY_Z1000_FRAME2_ATT_SW0001','2013-06-17T',(''),(''), 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2009220', 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2009220','');
FILE_SCHEMA(('CONFIG_CONTROL_DESIGN'));
ENDSEC;
DATA;
#12615=DIMENSIONAL_EXPONENTS(1.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#12616=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#12617=LENGTH_MEASURE_WITH_UNIT(LENGTH_MEASURE(2.54E1),#12616);
#12618=(CONVERSION_BASED_UNIT('INCH',#12617)LENGTH_UNIT()NAMED_UNIT(#12615));
#12619=DIMENSIONAL_EXPONENTS(0.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#12620=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#12621=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2), #12620);
#12622=(CONVERSION_BASED_UNIT('DEGREE',#12621)NAMED_UNIT(#12619)PLANE_ANGLE_UNIT());
#12623=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#12624=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(8.798240050418E-5),#12618, 'closure', 'Maximum model space distance between geometric entities at asserted connectivities');
#12625=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT(( #12624))GLOBAL_UNIT_ASSIGNED_CONTEXT((#12618,#12622,#12623))REPRESENTATION_CONTEXT('ID1','3'));
#12627=APPLICATION_CONTEXT( 'CONFIGURATION CONTROLLED 3D DESIGNS OF MECHANICAL PARTS AND ASSEMBLIES');
#12628=APPLICATION_PROTOCOL_DEFINITION('international standard', 'config_control_design',1994,#12627);
#12629=DESIGN_CONTEXT('',#12627,'design');
#12630=MECHANICAL_CONTEXT('',#12627,'mechanical');
#12631=PRODUCT('ASSY_Z1000_FRAME2_ATT_SW0001','ASSY_Z1000_FRAME2_ATT_SW0001', 'NOT SPECIFIED',(#12630));
#12632=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('1','LAST_VERSION', #12631,.MADE.);
#12636=PRODUCT_CATEGORY('part','');
#12637=PRODUCT_RELATED_PRODUCT_CATEGORY('detail','',(#12631));
#12633=PRODUCT_DEFINITION('design','',#12632,#12629);
#12634=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR ASSY_Z1000_FRAME2_ATT_SW0001.', #12633);
ENDSEC;
END-ISO-10303-21;