ISO-10303-21;
HEADER;
FILE_DESCRIPTION((''),'2;1');
FILE_NAME('A1REP0001_SW0001','2013-06-17T',(''),(''), 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2009220', 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2009220','');
FILE_SCHEMA(('CONFIG_CONTROL_DESIGN'));
ENDSEC;
DATA;
#21275=DIMENSIONAL_EXPONENTS(1.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#21276=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#21277=LENGTH_MEASURE_WITH_UNIT(LENGTH_MEASURE(2.54E1),#21276);
#21278=(CONVERSION_BASED_UNIT('INCH',#21277)LENGTH_UNIT()NAMED_UNIT(#21275));
#21279=DIMENSIONAL_EXPONENTS(0.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#21280=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#21281=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2), #21280);
#21282=(CONVERSION_BASED_UNIT('DEGREE',#21281)NAMED_UNIT(#21279)PLANE_ANGLE_UNIT());
#21283=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#21284=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(3.937007874016E-4),#21278, 'closure', 'Maximum model space distance between geometric entities at asserted connectivities');
#21285=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT(( #21284))GLOBAL_UNIT_ASSIGNED_CONTEXT((#21278,#21282,#21283))REPRESENTATION_CONTEXT('ID1','3'));
#21287=APPLICATION_CONTEXT( 'CONFIGURATION CONTROLLED 3D DESIGNS OF MECHANICAL PARTS AND ASSEMBLIES');
#21288=APPLICATION_PROTOCOL_DEFINITION('international standard', 'config_control_design',1994,#21287);
#21289=DESIGN_CONTEXT('',#21287,'design');
#21290=MECHANICAL_CONTEXT('',#21287,'mechanical');
#21291=PRODUCT('A1REP0001_SW0001','A1REP0001_SW0001','NOT SPECIFIED',(#21290));
#21292=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('1','LAST_VERSION', #21291,.MADE.);
#21296=PRODUCT_CATEGORY('part','');
#21297=PRODUCT_RELATED_PRODUCT_CATEGORY('detail','',(#21291));
#21293=PRODUCT_DEFINITION('design','',#21292,#21289);
#21294=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR A1REP0001_SW0001.',#21293);
ENDSEC;
END-ISO-10303-21;