ISO-10303-21;
HEADER;
FILE_DESCRIPTION((''),'2;1');
FILE_NAME('PRODUCT_36973_SW0002','2019-01-29T',(''),(''), 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2014090', 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2014090','');
FILE_SCHEMA(('CONFIG_CONTROL_DESIGN'));
ENDSEC;
DATA;
#28256=DIMENSIONAL_EXPONENTS(1.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#28258=LENGTH_MEASURE_WITH_UNIT(LENGTH_MEASURE(2.54E1),#28257);
#28259=(CONVERSION_BASED_UNIT('INCH',#28258)LENGTH_UNIT()NAMED_UNIT(#28256));
#28262=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2), #28261);
#28263=(CONVERSION_BASED_UNIT('DEGREE',#28262)NAMED_UNIT(*)PLANE_ANGLE_UNIT());
#28265=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.103013668974E-3),#28259, 'closure', 'Maximum model space distance between geometric entities at asserted connectivities');
#28266=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT(( #28265))GLOBAL_UNIT_ASSIGNED_CONTEXT((#28259,#28263,#28264))REPRESENTATION_CONTEXT('ID1','3'));
#28268=APPLICATION_CONTEXT( 'CONFIGURATION CONTROLLED 3D DESIGNS OF MECHANICAL PARTS AND ASSEMBLIES');
#28269=APPLICATION_PROTOCOL_DEFINITION('international standard', 'config_control_design',1994,#28268);
#28270=DESIGN_CONTEXT('',#28268,'design');
#28271=MECHANICAL_CONTEXT('',#28268,'mechanical');
#28272=PRODUCT('PRODUCT_36973_SW0002','PRODUCT_36973_SW0002','NOT SPECIFIED',( #28271));
#28273=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('1','LAST_VERSION', #28272,.MADE.);
#28277=PRODUCT_CATEGORY('part','');
#28278=PRODUCT_RELATED_PRODUCT_CATEGORY('detail','',(#28272));
#28257=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#28261=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#28264=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#28274=PRODUCT_DEFINITION('design','',#28273,#28270);
#28275=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR PRODUCT_36973_SW0002.',#28274);
ENDSEC;
END-ISO-10303-21;