ISO-10303-21;
HEADER;
FILE_DESCRIPTION((''),'2;1');
FILE_NAME('PRODUCT_34239_SW0001','2019-01-29T',(''),(''), 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2014090', 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2014090','');
FILE_SCHEMA(('CONFIG_CONTROL_DESIGN'));
ENDSEC;
DATA;
#30212=DIMENSIONAL_EXPONENTS(1.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#30214=LENGTH_MEASURE_WITH_UNIT(LENGTH_MEASURE(2.54E1),#30213);
#30215=(CONVERSION_BASED_UNIT('INCH',#30214)LENGTH_UNIT()NAMED_UNIT(#30212));
#30218=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2), #30217);
#30219=(CONVERSION_BASED_UNIT('DEGREE',#30218)NAMED_UNIT(*)PLANE_ANGLE_UNIT());
#30221=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.094292769545E-3),#30215, 'closure', 'Maximum model space distance between geometric entities at asserted connectivities');
#30222=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT(( #30221))GLOBAL_UNIT_ASSIGNED_CONTEXT((#30215,#30219,#30220))REPRESENTATION_CONTEXT('ID1','3'));
#30224=APPLICATION_CONTEXT( 'CONFIGURATION CONTROLLED 3D DESIGNS OF MECHANICAL PARTS AND ASSEMBLIES');
#30225=APPLICATION_PROTOCOL_DEFINITION('international standard', 'config_control_design',1994,#30224);
#30226=DESIGN_CONTEXT('',#30224,'design');
#30227=MECHANICAL_CONTEXT('',#30224,'mechanical');
#30228=PRODUCT('PRODUCT_34239_SW0001','PRODUCT_34239_SW0001','NOT SPECIFIED',( #30227));
#30229=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('1','LAST_VERSION', #30228,.MADE.);
#30233=PRODUCT_CATEGORY('part','');
#30234=PRODUCT_RELATED_PRODUCT_CATEGORY('detail','',(#30228));
#30213=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#30217=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#30220=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#30230=PRODUCT_DEFINITION('design','',#30229,#30226);
#30231=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR PRODUCT_34239_SW0001.',#30230);
ENDSEC;
END-ISO-10303-21;