ISO-10303-21;
HEADER;
FILE_DESCRIPTION((''),'2;1');
FILE_NAME('URX000534','2017-12-12T',(''),(''), 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2014090', 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2014090','');
FILE_SCHEMA(('CONFIG_CONTROL_DESIGN'));
ENDSEC;
DATA;
#29383=DIMENSIONAL_EXPONENTS(1.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#29385=LENGTH_MEASURE_WITH_UNIT(LENGTH_MEASURE(2.54E1),#29384);
#29386=(CONVERSION_BASED_UNIT('INCH',#29385)LENGTH_UNIT()NAMED_UNIT(#29383));
#29389=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2), #29388);
#29390=(CONVERSION_BASED_UNIT('DEGREE',#29389)NAMED_UNIT(*)PLANE_ANGLE_UNIT());
#29392=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(6.723452026201E-5),#29386, 'closure', 'Maximum model space distance between geometric entities at asserted connectivities');
#29393=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT(( #29392))GLOBAL_UNIT_ASSIGNED_CONTEXT((#29386,#29390,#29391))REPRESENTATION_CONTEXT('ID1','3'));
#29395=APPLICATION_CONTEXT( 'CONFIGURATION CONTROLLED 3D DESIGNS OF MECHANICAL PARTS AND ASSEMBLIES');
#29396=APPLICATION_PROTOCOL_DEFINITION('international standard', 'config_control_design',1994,#29395);
#29397=DESIGN_CONTEXT('',#29395,'design');
#29398=MECHANICAL_CONTEXT('',#29395,'mechanical');
#29399=PRODUCT('URX000534','URX000534','NOT SPECIFIED',(#29398));
#29400=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('2','LAST_VERSION', #29399,.MADE.);
#29404=PRODUCT_CATEGORY('part','');
#29405=PRODUCT_RELATED_PRODUCT_CATEGORY('detail','',(#29399));
#29384=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#29388=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#29391=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#29401=PRODUCT_DEFINITION('design','',#29400,#29397);
#29402=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR URX000534.',#29401);
ENDSEC;
END-ISO-10303-21;