Service Note: DeviceNet Communications when using an A-B 1756-DNB series C and D Modules with a 1756-EtherNet/IP Module as a Gateway

SN.AFD.09

35KB

 Less

Rev Date:

01/14/2009

Description:

YEA Engineering and QC Groups have discovered an error when accessing a DeviceNet network using an EtherNet/IP module as a gateway in the Allen-Bradley 1756 line of PLCs. When communicating with DeviceNet devices through the EtherNet/IP gateway, all parameters and registers with an address LSB of 0x00 return the not enough data error. If the parameter or register attribute is 0x00, the 1756-DNB series C and D modules with firmware versions of 11.002 or earlier strip off the attribute and use the first data byte as the attribute. This leaves only one byte of data with the DeviceNet option expecting two bytes.

Rev Number:

01

Language:

English

Product Group:

Inverter Drives

Product Line:

Network Comms-DeviceNet, Network Comms-EtherNet-IP, Network Communications Options, V7N Drive

Doc Type:

Service - Support Documents

Doc SubType:

Service Note

  Share

|

 Rate

Rate this article :

Submit

Service Note: Emergency Override Speed

SN.AFD.11

32KB

 Less

Rev Date:

06/22/2009

Description:

This service note covers the applicable drives, issue, background information, investigation, and recommendations/corrective actions.

Language:

English

Product Group:

Inverter Drives

Product Line:

E7 Drive, E7B Drive Bypass, E7BR Package, E7C Drive Configured, E7CR Package, E7L Drive Bypass, E7N Narrow Bypass Package, P7 Drive, P7B Drive Bypass, P7BR Package, P7C Drive Configured, P7CR Package, P7S Slim Configured Package

Doc Type:

Service - Support Documents

Doc SubType:

Service Note

  Share

|

 Rate

Rate this article :

Submit