Motion control systems consist of three main components: a controller, an amplifier and the motor itself. These three components must work together in harmony to ensure high performance and ease-of-use. This article will examine the latest Yaskawa product offerings in these three areas. It will show how these products work individually, and how they work together in an integrated motion control system.
This document describes in detail the various steps to configure a Phoenix MODBUS bus coupler to communicate with the MPiec. The bus coupler can be configured through its web interface. The data block addresses and function codes that can be used on the MPiec are also listed in this document.
This document describes how projects and user libraries created in MotionWorks IEC Pro can be password protected. Application code developers may want to secure user libraries and/or certain custom function blocks. Security can be ensured by password protecting the POUs or function blocks in MotionWorks IEC Pro. The developer has the ability to manage the password so that it can be edited at a later stage or even unlocked for certain customers if desired
This document highlights the various steps to configure and use the Phoenix PWM module with the MPiec controller over MECHATROLINK II to get pulse or step and direction output. A sample program that explains how the control word can be used to obtain motion on a step and direction drive is also provided.
This application note describes the configurations required to set up a Pro-face AGP HMI to communicate with an MPiec motion controller. The HMI is a client and the MPiec controller is a server in this MODBUS protocol
This application note describes how to create an Ethernet connection between the MPiec series machine controllers and PanelView Plus HMIs from Rockwell. The document describes example code that has been created for MotionWorks IEC Express, KEPServer Enterprise and RSView Studio 4.0. Users can find the example files and also an eLearning Video describing the same technique at eLV.MP2000iec.01.IECtoPVPlusHMI.
This document describes the configuration required on an MPiec controller (if used as a scanner), configuration required on the scanner device (if the MPiec controller is used as an adapter) and the configuration of ports on an 1800 series Cisco router to enable EtherNet/IP communication between an MPiec controller and a third party device on a different sub network.