J1000 Drive

Specifications & Features

In our pursuit to create drives optimized for variable speed needs incompact applications, the J1000 is the solution. This micro-drive is simple and reliable with even higher quality. Demand continues to increase for a compact shaft turner with hassle-free maintenance. Yaskawa drives have earned a reputation for high performance, high functionality, and high quality.

Performance Features
  • Ratings:
    1/8 to 3 HP at 200-240 VAC 1-ph
    1/8 to 5 HP at 200-240 VAC 3-ph
    1/2 to 7.5 HP (ND) at 380-480 VAC 3-ph
  • Overload Capacity:
    150% for 60 sec. (Heavy Duty)
    120% for 60 sec. (Normal Duty)
  • Control Methods: V/f Control
  • DC injection braking, ramp to stop
  • Electronic reversing
  • Adjustable accel/decel: 0.0 to 6000.0 seconds
  • Controlled speed range: 40:1
  • Speed Regulation:
    ± 0.5 to 1% with slip compensation
  • Displacement power factor: 0.98
  • Output frequency: 0 to 400 Hz
  • Frequency resolution:
    0.01 Hz with digital reference
    0.06 / 60 Hz with analog reference
  • Frequency accuracy:
    0.01% with digital command
    0.5% with analog command
  • Volts / hertz ratio: infinitely adjustable pattern
  • DC Injection braking: adjustable amplitude,
    duration, current limited
  • Torque boost: full range, auto
  • Power loss ride-thru: 0.5 sec.
  • Speed search
  • Auto restart
  • 2 Critical frequency rejection settings
  • Slip Compensation


Protective Features
  • Current limit, stall prevention during
    accel, decel, and run
  • Motor and drive overload
  • Over voltage prevention function
  • Instantaneous over current
  • Short circuit
  • Under voltage
  • Heatsink overheat
  • Ground fault protection
  • Over/under torque
  • Short circuit current rating: 30KAIC RMS


Options
  • Dynamic Braking resistor (external)
  • Remote LED Operator w/ copy function
  • Modbus 232/422/485 Communications
  • Analog Potentiometer Card
  • DriveWizardTM Plus
  • DIN rail mounting kit
  • Y-Stick Copy Unit
Design Features
  • 16-bit microprocessor logic
  • Digital keypad operator, 5 digits
  • LED status display
  • Remote Mount Keypad Capability
  • 5 multifunction digital inputs
  • 1 multifunction digital output
  • Programmable form C output contact for
    customer use: 1A at 250 VAC or 30 VDC
  • 24 VDC control logic compatible with
    sourcing or sinking outputs (PNP or NPN)
  • Carrier frequency: 15 kHz max; swing PWM
  • 8 multi-speed settings plus jog speed
  • 1 Remote speed reference:
    0-10 VDC (20 kohms) or isolated
    4-20 mA (250 ohms)
  • Signal follower: bias and gain
  • Analog monitor output:
    0-10 VDC proportional to output
    frequency or output current
  • 133 parameters
  • Cooling fan controlled by drive run/stop
  • UL recognized electronic overload
  • MTBF: 28 years
  • Built-in Dynamic Braking Transistor
  • Protected Chassis
  • Side-by-Side mounting
  • Maintenance monitors


Service Conditions
  • Ambient service temperature:
    -10° to 50°C (+14° to 122°F)
  • Ambient storage temperature:
    -20° to 60°C (-4° to 140°F)
  • Humidity: to 95% non-condensing
  • Altitude: to 3300 ft; higher by derating
  • Service factor: 1.0
  • Input voltage: -15% to +10%
    200 to 240 VAC, 380 to 480 VAC
  • Input frequency: +/-5%; 50/60 Hz
  • Input phase sequence insensitive


Standards
  • UL 508C (Power Conversion)
  • CSA 22.2 No. 14-95
    (Industrial Control Equipment)
  • UL, cUL listed; CE marked
  • RoHS compliant
  • EN 50178 (LVD)
  • EN 50081-2, EN 50082-2 (EMC)
  • EN 61800-3
  • IEC 529, 146
  • FCC CFR 47 Part 15 Subpart B
    (w/ External Filter)