G5 Drive 600 Volt

G5 Drive 600 Volt - YAI

The G5 Drive 600 Volt is a full featured drive, providing outstanding quality, performance, flexibility, and environmental friendliness through 200HP. Enjoy network communications, feedback, and expandable I/O to control anything from simple fans and pumps to complex machines. For new installations or retrofits, the G5 Drive 600 Volt provides a single robust solution, regardless of your application.

Tech Manual

TemplateWeb

FAQs

Sort by :

Expand All

Didn't find what you were looking for? Try solutioncenter.yaskawa.com

Showing 51 to 60 of 72 entries.

Previous Page
Page1
Intermediate Pages
- Page2
- Page3
- Page4
Page5
Page6
Page7
Page8
Next Page

Question	Posted Date
E-10 -- Fault Code Description Posted Date: 06/08/2007 Answer: Digital Operator Display Text: E-10 SI-0F/G CPU down Description: The CPU on the SI-F/G option board has stopped operating. Possible Cause(s): Defective option board, electrical noise effecting operation. Corrective Action: Cycle power, replace the option board. For information on resetting a fault on G5, E7, F7or G7 Drives, see FAQ# DRV-5P8PGJ. For more information and a complete list of fault codes see the following manuals TM4515 and PP.P5G5.01. Product Group/Line: Inverter Drives, G5HHP Drive, G5 GPD515 Drive, G5 Drive 600 Volt Topic/Sub Topic: Ask a Technical Question, Fault Code Description Document Number: DRV-5P2HV5 Published Date: 06/08/2007 Share \| Rate Rate this article :	06/08/2007
Do Yaskawa drives have a lock-out prohibiting setting or changing of parameters? Posted Date: 06/08/2007 Answer: Yes, most all Yaskawa drives posses parameter security that helps prevent inadvertent setting changes. The instruction manuals for the drive explain this function in more detail. Use the following instructions to obtain write access for the drives described below: For the V7 drive: Parameter n001 controls the access to all of the parameters. A setting of "0" allows no parameters to be changed, while settings of "4" or '5' allow all parameters to be changed. Settings "1" through "3" are increments of the level of access allowed. For the P5 or PC5 or GPD506 drive: Parameter n001 controls the access to all of the parameters. A setting of "0" allows no parameters to be changed, while settings of "3" allows all parameters to be changed. Settings "1" and "2" are increments of the level of access allowed. For the G5 or GPD515 - General Purpose Drive , G5HHP - Hi Horsepower G5 Drive: Parameter A1-01 controls access to all parameters that are available in the control method being used. A setting of "Advanced" in this parameter allows all of the available parameters of the current control method to be changed. Some parameters are not available in some control methods. Refer to Appendix 1 in the technical manual. Product Group/Line: Inverter Drives, G5 GPD515 Drive, G5HHP Drive, P5 GPD506 Drive, V7 Drive, V74X Drive, V7N Drive, P5 Drive 600 Volt, G5 Drive 600 Volt Topic/Sub Topic: Ask a Technical Question, Programming Document Number: DRV-5GSUFL Published Date: 06/08/2007 Share \| Rate Rate this article :	06/08/2007
Does installation of an AC Drive near a large capacitor bank (power-factor correction) require special consideration? Posted Date: 10/27/2005 Answer: Yes. Capacitors are put across the AC power line to correct for lagging power factor due to inductive loads. Motors, relay coils, transformers, etc. are inductive loads. Many times capacitors are switched on and off the line as demand changes. Unfortunately, this switching results in large voltage spikes on the power line which can damage the drives rectifier circuit. To prevent damage use a 5% line reactor on the drive's input. If overvoltage faults are indicated, add dynamic braking -- this will clamp the DC bus. Product Group/Line: Inverter Drives, E7 Drive, F7 Drive, G5 Drive 600 Volt, G5HHP Drive, G7 Drive, J7 Drive, P5 Drive 600 Volt, P7 Drive, V7 Drive, V74X Drive, V7N Drive, VS mini Drive Topic/Sub Topic: Ask a Technical Question, Harmonics Document Number: DRV-5FLM2U Published Date: 10/27/2005 Share \| Rate Rate this article :	10/27/2005
DEV -- Fault Code Description Posted Date: 06/08/2007 Answer: Digital Operator Display Text: DEV Speed Deviation Description: The deviation of the speed reference and speed feedback has exceeded the regulation level. A minor fault contact output can be programmed by using the multi-function outputs. Possible Cause(s): The load has changed considerably. Corrective Action: Check the load on the motor, verify the program settings (F1-10 PG Deviate Level, F1-11 PG Deviate Time. F1-04 PG Deviation Select. For information on resetting a fault on G5, E7, F7or G7 Drives, see FAQ# DRV-5P8PGJ. For more information and a complete list of fault codes see the following manuals TM4515 and PP.P5G5.01. Product Group/Line: Inverter Drives, G5HHP Drive, G5 GPD515 Drive, G5 Drive 600 Volt Topic/Sub Topic: Ask a Technical Question, Fault Code Description Document Number: DRV-5P2J95 Published Date: 06/08/2007 Share \| Rate Rate this article :	06/08/2007
CPF23 -- Fault Code Description Posted Date: 06/08/2007 Answer: Digital Operator Display Text: CPF23 Option DPRAM Err Description: DPRAM handshake timing between the 515/G5 and a network or communication option card has timed out. Possible Cause(s): An option board is not correctly connected to the control board, an option board that is not made for the 515/G5 inverter is attached to the control board. Corrective Action: Remove power to the inverter and connect the option board once more. Perform a factory initialization , cycle power, replace the option board, replace the control board For information on resetting a fault on G5, E7, F7or G7 Drives, see FAQ# DRV-5P8PGJ. For more information and a complete list of fault codes see the following manuals TM4515 and PP.P5G5.01. Product Group/Line: Inverter Drives, G5HHP Drive, G5 GPD515 Drive, G5 Drive 600 Volt Topic/Sub Topic: Ask a Technical Question, Fault Code Description Document Number: DRV-5P2JNG Published Date: 06/08/2007 Share \| Rate Rate this article :	06/08/2007
CPF22 -- Fault Code Description Posted Date: 06/08/2007 Answer: Digital Operator Display Text: CPF22 Option Type Err Description: DPRAM fault detected at power up. Possible Cause(s): Unrecognizable communication or network option board is connected to the control board Corrective Action: Remove any option boards and cycle power, perform a factory initialization, replace the option board, replace the control board. For information on resetting a fault on G5, E7, F7or G7 Drives, see FAQ# DRV-5P8PGJ. For more information and a complete list of fault codes see the following manuals TM4515 and PP.P5G5.01. Product Group/Line: Inverter Drives, G5HHP Drive, G5 GPD515 Drive, G5 Drive 600 Volt Topic/Sub Topic: Ask a Technical Question, Fault Code Description Document Number: DRV-5P2JM8 Published Date: 06/08/2007 Share \| Rate Rate this article :	06/08/2007
CPF06 -- Fault Code Description Posted Date: 06/08/2007 Answer: Digital Operator Display Text: CPF06 Option Error Description: Option connection fault. Possible Cause(s): An option board is not correctly connected to the control board, an option board that is not made for the 515/G5 inverter is attached to the control board . Corrective Action: Remove power to the inverter and connect the option board once more. Perform a factory initialization , cycle power, replace the option board, replace the control board. For information on resetting a fault on G5, E7, F7or G7 Drives, see FAQ# DRV-5P8PGJ. For more information and a complete list of fault codes see the following manuals TM4515 and PP.P5G5.01. Product Group/Line: Inverter Drives, G5HHP Drive, G5 GPD515 Drive, G5 Drive 600 Volt Topic/Sub Topic: Ask a Technical Question, Fault Code Description Document Number: DRV-5P2JJ9 Published Date: 06/08/2007 Share \| Rate Rate this article :	06/08/2007
CPF05 -- Fault Code Description Posted Date: 06/08/2007 Answer: Digital Operator Display Text: CPF05 External A/D Err Description: CPU external A/D converter fault. Possible Cause(s): Noise or spike on the control board input terminals. Corrective Action: Perform a factory initialization , cycle power, replace the control board. For information on resetting a fault on G5, E7, F7or G7 Drives, see FAQ# DRV-5P8PGJ. For more information and a complete list of fault codes see the following manuals TM4515 and PP.P5G5.01. Product Group/Line: Inverter Drives, G5HHP Drive, G5 GPD515 Drive, G5 Drive 600 Volt Topic/Sub Topic: Ask a Technical Question, Fault Code Description Document Number: DRV-5P2JGY Published Date: 06/08/2007 Share \| Rate Rate this article :	06/08/2007
CPF04 -- Fault Code Desciption Posted Date: 06/08/2007 Answer: Digital Operator Display Text: CPF04 Internal A/D Err Description: CPU internal A/D converter fault. 506 digital operator will display CPF05. Possible Cause(s): Noise or spike on the control board input terminals. Corrective Action: Perform a factory initialization , cycle power, replace the control board. For information on resetting a fault on G5, E7, F7or G7 Drives, see FAQ# DRV-5P8PGJ. For more information and a complete list of fault codes see the following manuals TM4515 and PP.P5G5.01. Product Group/Line: Inverter Drives, G5HHP Drive, G5 GPD515 Drive, P5 GPD506 Drive, P5 Drive 600 Volt, G5 Drive 600 Volt Topic/Sub Topic: Ask a Technical Question, Fault Code Description Document Number: DRV-5P2JFU Published Date: 06/08/2007 Share \| Rate Rate this article :	06/08/2007
CPF02 -- Fault Code Description Posted Date: 06/08/2007 Answer: Digital Operator Display Text: CPF02 BB Circuit Err Description: Baseblock circuit fault at power up. Possible Cause(s): Gate array hardware failure during power up. Corrective Action: Perform a factory initialization, cycle power, replace the control board. For information on resetting a fault on G5, E7, F7or G7 Drives, see FAQ# DRV-5P8PGJ. For more information and a complete list of fault codes see the following manuals TM4515 and PP.P5G5.01. Product Group/Line: Inverter Drives, G5HHP Drive, G5 GPD515 Drive, G5 Drive 600 Volt Topic/Sub Topic: Ask a Technical Question, Fault Code Description Document Number: DRV-5P2JDV Published Date: 06/08/2007 Share \| Rate Rate this article :	06/08/2007

Showing 51 to 60 of 72 entries.

Previous Page
Page1
Intermediate Pages
- Page2
- Page3
- Page4
Page5
Page6
Page7
Page8
Next Page

SAFETY PRECAUTIONS AND INSTRUCTIONS FOR USE OF FAQ INFORMATION!

Please read and understand the product instruction manual before installing, servicing or operating Yaskawa products. FAQ content and illustrations are provided as technical advice to augment the information in manual, not supersede it. It is not possible to give detailed instructions for all types of installation or support activities. The information described in the FAQs are subject to change without notice to improve the product or FAQ. Yaskawa assumes no responsibility for errors or omissions or damages resulting from the use of the information contained in any FAQ. All warnings, cautions and product instruction for product use must be followed. Installation, operation and maintenance should be carried out by qualified personnel. Failure to observe these and other precautions highlighted in the product manuals will expose the user to high voltages resulting in, serious injury or death. Qualified personnel are defined as individuals who are familiar with the installation, starting, operation and maintenance of Yaskawa products of the type described and have proper qualifications to perform the work.

Node: dxpprd02:8080

Rating

Rate

SiteSearch

Yaskawa Main Navigation

G5 Drive 600 Volt

EditContent

Navigation Menu

G5 Drive 600 Volt

G5 Drive 600 Volt

G5 Drive 600 Volt - YAI

TemplateWeb

Overview

Support & Training

Documents

Drawings

FAQs

SAFETY PRECAUTIONS AND INSTRUCTIONS FOR USE OF FAQ INFORMATION!

Rating

SiteSearch

Americas

Europe/Africa/Middle East

Japan/Asia/Pacific Rim

SiteSearch

G5 Drive 600 Volt

Breadcrumb

Navigation Menu

G5 Drive 600 Volt

G5 Drive 600 Volt

G5 Drive 600 Volt - YAI

TemplateWeb

Overview

Support & Training

Documents

Drawings

Overview

Support & Training

Documents

Drawings

FAQs

SAFETY PRECAUTIONS AND INSTRUCTIONS FOR USE OF FAQ INFORMATION!

Rating

SiteSearch