SGMCS Direct Drive

6-600 Nm peak torque, high inertia

The SGMCS servomotor line is designed for direct drive applications where the load is directly attached to the motor surface. Pre-tapped mounting holes and a hollow-through shaft permit a variety of machine designs. This direct drive motor has substantial load carrying bearings, low speed windings, and 1,048,576 ppr absolute encoders. 200 volt windings are available with maximum speeds up to 500 rpm. There are 17 sizes available with up to 5,310 lb-in (600 Nm) of peak torque.

eLearning Curriculum

Sort by :

Expand All

Showing 15 results.

Title/Number	File(s)	Rev Date
eLearning Module: Servo Motor Sizing Basics Part 1 - Core Concepts eLM.Servo.02.Sizing1 39.9MB Rev Date:10/30/2017 Related Files: Certification Test for Servo Sizing eLMS Watch Video Description: This eLM provides basic servomotor sizing concepts. Topics such as Peak Torque, RMS Torque, Inerita Ratio, and Speed are discussed. The material in this module was published in printed form by Design News. This eLM is also available on the Yaskawa America, Drives and Motion Division YouTube Channel. Duration: 9:45 Rev Number: 2.0 Language: English Product Group: Servo Products Product Line: SGDA, SGDB, SGDC, SGDE, SGDF Sigma Mini, SGDG LEGEND, SGDH Sigma II, SGDJ, SGDM, SGDS, SGLF Series, SGLG Series, SGLT Series, SGM, SGMAH Sigma II, SGMAJ, SGMAV Sigma-5, SGMB, SGMBH Sigma II, SGMCS Direct Drive, SGMG, SGMGH Sigma II, SGMGV Sigma-5, SGMJV Sigma-5, SGMM Sigma Mini, SGMP, SGMPH Sigma II, SGMPS, SGMS, SGMSH Sigma II, SGMSV Sigma-5, SGMUH Sigma II, Sigma FSP, Sigma Trac, SGT Sigma Trac, STF Sigma Trac, SJDE Junma, SJME Junma, SGDV Analog, SGDV EtherCAT, SGDV Indexer, SGDV MECHATROLINK-II, SGDV MECHATROLINK-III, SGDV MP2600iec, SGLF2 Series, SigmaSelect Doc Type: Training Documents Doc SubType: eLearning Modules, eLearning Videos Related Files: Certification Test for Servo Sizing eLMS Share \| Rate Rate this article :	39.9MB	10/30/2017
eLearning Module: Servo Motor Sizing Basics Part 2 - Technical eLM.Servo.03.Sizing2 41.1MB Rev Date:07/30/2019 Related Files: Certification Test for Servo Sizing eLMS Watch Video Description: This eLM discusses Torque, Motion Profile, Load Inertia, Gearing, Regeneration, and Efficiency as important servo sizing factors. Equations and practical suggestions for motor sizing and machine design are also discussed. This eLM is also available on the Yaskawa America, Drives and Motion Division YouTube Channel. Duration: 17:11 Rev Number: 2.1 Language: English Product Group: Servo Products Product Line: SGDA, SGDB, SGDF Sigma Mini, SGDG LEGEND, SGDH Sigma II, SGDJ, SGDS, SGLF Series, SGLG Series, SGLT Series, SGM, SGMAH Sigma II, SGMAJ, SGMAV Sigma-5, SGMB, SGMBH Sigma II, SGMCS Direct Drive, SGMG, SGMGH Sigma II, SGMGV Sigma-5, SGMJV Sigma-5, SGMM Sigma Mini, SGMP, SGMPH Sigma II, SGMPS, SGMS, SGMSH Sigma II, SGMSV Sigma-5, SGMUH Sigma II, Sigma FSP, Sigma Trac, SGT Sigma Trac, STF Sigma Trac, SJDE Junma, SJME Junma, SGDV Analog, SGDV EtherCAT, SGDV Indexer, SGDV MECHATROLINK-II, SGDV MECHATROLINK-III, SGDV MP2600iec, SGLF2 Series, SigmaSelect Doc Type: Training Documents Doc SubType: eLearning Modules, eLearning Videos Related Files: Certification Test for Servo Sizing eLMS Share \| Rate Rate this article :	41.1MB	07/30/2019
eLearining Video: Direct Drive Servos eLV.DirectDrive.01.TechIntro 159.4MB Rev Date:10/21/2021 Watch Video Description: This eLearning video introduces industrial direct drive servo motor technology and applications. Live demos and 3D models are used to describe the features, properties, construction, and application, while comparing key performance metrics to transmission based mechanisms such as gearboxes or belt and pulley. Rev Number: 1.00 Language: English Product Group: Servo Products Product Line: SGM7D Direct Drive, SGM7F Direct Drive, SGM7E Sigma-7, SGMCS Direct Drive, SGMCV Direct Drive Doc Type: Training Documents Doc SubType: eLearning Modules, eLearning Videos Share \| Rate Rate this article :	159.4MB	10/21/2021
eLearining Video: Yaskawa Direct Drive Motors eLV.DirectDrive.02.ProductLine 130.9MB Rev Date:09/03/2021 Watch Video Description: This eLearning video introduces the direct drive motor product line offered by Yaskawa, examining each motor series and summarizing the specifications and details to see how they fit into different applications. This eLV is also available on the Yaskawa America, Drives and Motion Division You Tube Channel. Duration: 9:29 Rev Number: 1.0 Language: English Product Group: Servo Products Product Line: SGM7D Direct Drive, SGM7F Direct Drive, SGMCS Direct Drive, SGMCV Direct Drive, SGM7E Direct Drive Doc Type: Training Documents Doc SubType: eLearning Modules, eLearning Videos Share \| Rate Rate this article :	130.9MB	09/03/2021
eLearining Video: Servo Sizing Demystified eLV.Servo.01.SizDemystify 186.2MB Rev Date:04/20/2021 Watch Video Description: This eLV discusses common applications for servomotors, asking the correct questions to size servos, how to avoid common pitfalls and mistakes, the impact of gearboxes on motors, and finally a demo of our SigmaSelect Software. This is a recording of a live webclass. Duration: 1:01:36. Rev Number: 1.00 Language: English Product Group: Servo Products Product Line: General Servo, S7A Gear Motors, S7G Gear Motors, S7J Gear Motors, S7P Gear Motors, SGD7S EtherCAT, SGD7S Analog, SGD7S EtherCAT with FSoE, SGD7S Mechatrolink-III, SGD7S MP2600iec, SGD7S Option Type, SGD7S Sigma-7Siec, SGD7W EtherCAT, SGD7W Mechatrolink-III, SGDH Sigma II, SGDV Indexer, SGDV EtherCAT, SGDV Analog, SGDS, SGDV MECHATROLINK-II, SGDV MECHATROLINK-III, SGDV Mini, SGDV MP2600iec, SGDV SigmaLogic, SGLF Series, SGLF2 Series, SGLG Series, SGLT Series, SGM, SGM7A Sigma-7, SGM7D Direct Drive, SGM7E Sigma-7, SGM7F Direct Drive, SGM7G Sigma-7, SGM7P Sigma-7, SGM7J Sigma-7, SGMAH Sigma II, SGMAJ, SGMAV Sigma-5, SGMB, SGMBH Sigma II, SGMCS Direct Drive, SGMCV Direct Drive, SGMDH Sigma II, SGMDM Sigma II, SGME, SGMG, SGMGH Sigma II, SGMGV Sigma-5, SGMJV Sigma-5, SGML, SGMM Sigma Mini, SGMMV Sigma-5 Mini, SGMP, SGMPH Sigma II, SGMPS, SGMS, SGMSH Sigma II, SGMSV Sigma-5, SGMUH Sigma II, SGMVH, SGMVV Sigma-5, SGT Sigma Trac, Sigma FSP, Sigma Trac, Sigma Trac II, SigmaLogic Software Package, SigmaLogic7 Compact, SigmaLogic7 Modbus, SigmaSelect, SigmaWin Plus 7 Software, SigmaWin Plus Software, SigmaWin100-200 Software, STF Sigma Trac Doc Type: Training Documents Doc SubType: eLearning Modules, eLearning Videos, Training Webcasts Share \| Rate Rate this article :	186.2MB	04/20/2021
eLearning Video: Servo Basic Concepts eLV.ServoMotion.01.BasicConcepts 559.3MB Rev Date:05/06/2019 Related Files: Certification Test for eLV.Servo.01.BasicConcepts Watch Video Description: This video provides a practical overview of AC servo systems and their implementation. Aimed at the technical person who is new to the world of servos, this video 1) defines what a servo is and examines its components, 2) explores how a servo works within a motion control system, 3) the concept of a servo "axis", 4) system power up, 5) directional movement, 6) over-travel limit switches 7) distance and position, 8) homing, 9) actuator types. Also available on You Tube and broken up by chapter. Duration: 16 minutes. Rev Number: 1 Language: English Product Group: Servo Products Product Line: CACR-HR, CACR-IR, CACR-PR, CACR-SR, CPCR-FR, CPCR-MR, CPCR-PF, DR1, DR2, FB5, FB9, General Servo, J02, J03, P09, P12, R01 to R40, S01, S22, SGAGS, SGD, SGDA, SGDB, SGDC, SGDE, SGDF Sigma Mini, SGDG LEGEND, SGDH Sigma II, SGDJ, SGDL, SGDM, SGDS, SGLF Series, SGLG Series, SGLT Series, SGM, SGMAH Sigma II, SGMAJ, SGMAV Sigma-5, SGMB, SGMBH Sigma II, SGMCS Direct Drive, SGMDH Sigma II, SGME, SGMG, SGMGH Sigma II, SGMGV Sigma-5, SGMJV Sigma-5, SGML, SGMM Sigma Mini, SGMMV Sigma-5 Mini, SGMP, SGMPH Sigma II, SGMPS, SGMS, SGMSH Sigma II, SGMSV Sigma-5, SGMUH Sigma II, SGMVH, SGMVV Sigma-5, Sigma FSP, Sigma Trac, SGT Sigma Trac, STF Sigma Trac, SigmaWin Plus Software, SigmaWin100-200 Software, SJDE Junma, SJME Junma, SVMON Software, T01, T03, T06, UGCMED, UGCMFD, UGFMED, UGHMED, UGHMFD, UGJMED, UGMMEM, UGMMKR, UGPMED, UGPMEE, UGPMEG, UGPMEM, UGPMEN or PMEN, UGPMES or PMES, UGPMFE, UGQMEM, UGRMEM, UGTMEM, USACEM, USADED, USAFED, USAGED, USAMED, USAPEM, USAREM, USASEM, VS808 Series, SGDV Analog, SGDV EtherCAT, SGDV MECHATROLINK-II, SGDV MECHATROLINK-III, SGDV MP2600iec, SGDV Indexer, SGLF2 Series, Sigma Trac II, Network-Comm-EtherCAT, Network-Comm-MECHATROLINK-II Doc Type: Training Documents Doc SubType: eLearning Modules, eLearning Videos Related Files: Certification Test for eLV.Servo.01.BasicConcepts Share \| Rate Rate this article :	559.3MB	05/06/2019
eLearning Video: Servo Basic Concepts - What Is A Servo eLV.ServoMotion.01.SBC_ServoDef 15.2MB Rev Date:04/02/2014 Watch Video Description: This video examines the definition of a servo and internal components. Aimed at the technical person who is new to the world of servos, the video provides a practical overview of AC servo systems and how they are used. This video is a segment from the "Servo Basic Concepts" eLearning video, document number eLV.ServoMotion.01.BasicConcepts. Also available on You Tube . Duration: 2 minutes. Rev Number: 1.00 Language: English Product Group: Servo Products Product Line: CACR-HR, CACR-IR, CACR-PR, CACR-SR, CPCR-FR, CPCR-MR, CPCR-PF, DR1, DR2, FB5, FB9, General Servo, J02, J03, P09, P12, QR, R01 to R40, S01, S22, SGAGS, SGD, SGDA, SGDB, SGDC, SGDE, SGDF Sigma Mini, SGDG LEGEND, SGDH Sigma II, SGDJ, SGDL, SGDM, SGDS, SGLF Series, SGLG Series, SGLT Series, SGM, SGMAH Sigma II, SGMAJ, SGMAV Sigma-5, SGMB, SGMBH Sigma II, SGMCS Direct Drive, SGMDH Sigma II, SGME, SGMG, SGMGH Sigma II, SGMGV Sigma-5, SGMJV Sigma-5, SGML, SGMM Sigma Mini, SGMMV Sigma-5 Mini, SGMP, SGMPH Sigma II, SGMPS, SGMS, SGMSH Sigma II, SGMSV Sigma-5, SGMUH Sigma II, SGMVH, SGMVV Sigma-5, Sigma FSP, Sigma Trac, SGT Sigma Trac, STF Sigma Trac, SigmaWin Plus Software, SigmaWin100-200 Software, SJDE Junma, SJME Junma, SVMON Software, T01, T03, T06, UGCMED, UGCMFD, UGFMED, UGHMED, UGHMFD, UGJMED, UGMMEM, UGMMKR, UGPMED, UGPMEE, UGPMEG, UGPMEM, UGPMEN or PMEN, UGPMES or PMES, UGPMFE, UGQMEM, UGRMEM, UGTMEM, USACEM, USADED, USAFED, USAGED, USAMED, USAPEM, USAREM, USASEM, VS808 Series, SGDV Analog, SGDV EtherCAT, SGDV MECHATROLINK-III, SGDV MECHATROLINK-II, SGDV MP2600iec, SGLF2 Series, Sigma Trac II, Network-Comm-EtherCAT, Network-Comm-MECHATROLINK-II Doc Type: Training Documents Doc SubType: eLearning Modules, eLearning Videos Share \| Rate Rate this article :	15.2MB	04/02/2014
eLearning Video: Servo Basic Concepts - Motion Control System eLV.ServoMotion.02.SBC_MCSystem 14.8MB Rev Date:04/02/2014 Watch Video Description: This video illustrates servo function within a motion control system.Aimed at the technical person who is new to the world of servos, the video provides a practical overview of AC servo systems and how they are used. This video is a segment from the "Servo Basic Concepts" eLearning video, document number eLV.ServoMotion.01.BasicConcepts. Also available on You Tube . Duration: 2 minutes. Rev Number: 1.00 Language: English Product Group: Servo Products Product Line: CACR-HR, CACR-IR, CACR-PR, CACR-SR, CPCR-FR, CPCR-MR, CPCR-PF, DR1, DR2, FB5, FB9, General Servo, J02, J03, P09, P12, R01 to R40, S01, S22, SGAGS, SGD, SGDA, SGDB, SGDC, SGDE, SGDF Sigma Mini, SGDG LEGEND, SGDH Sigma II, SGDJ, SGDL, SGDM, SGDS, SGLG Series, SGLT Series, SGM, SGMAH Sigma II, SGMAJ, SGMB, SGMBH Sigma II, SGMCS Direct Drive, SGMDH Sigma II, SGME, SGMG, SGMGH Sigma II, SGMGV Sigma-5, SGMJV Sigma-5, SGML, SGMM Sigma Mini, SGMMV Sigma-5 Mini, SGMP, SGMPH Sigma II, SGMPS, SGMS, SGMSH Sigma II, SGMSV Sigma-5, SGMUH Sigma II, SGMVH, SGMVV Sigma-5, Sigma FSP, Sigma Trac, SGT Sigma Trac, STF Sigma Trac, SigmaWin Plus Software, SigmaWin100-200 Software, SJDE Junma, SJME Junma, SVMON Software, T01, T03, T06, UGCMED, UGCMFD, UGFMED, UGHMED, UGHMFD, UGJMED, UGMMEM, UGMMKR, UGPMED, UGPMEE, UGPMEG, UGPMEM, UGPMEN or PMEN, UGPMES or PMES, UGPMFE, UGQMEM, UGRMEM, UGTMEM, USACEM, USADED, USAFED, USAGED, USAMED, USAPEM, USAREM, USASEM, VS808 Series, SGDV Analog, SGDV EtherCAT, SGDV MECHATROLINK-II, SGDV MECHATROLINK-III, SGDV MP2600iec, SGLF Series, SGLF2 Series, Sigma Trac II, Network-Comm-EtherCAT, Network-Comm-MECHATROLINK-II Doc Type: Training Documents Doc SubType: eLearning Modules, eLearning Videos Share \| Rate Rate this article :	14.8MB	04/02/2014
eLearning Video: Servo Basic Concepts - Axis of Motion eLV.ServoMotion.03.SBC_Axis 9.9MB Rev Date:04/02/2014 Watch Video Description: This video explains the term servo "axis" and the concept behind it.Aimed at the technical person who is new to the world of servos, the video provides a practical overview of AC servo systems and how they are used. This video is a segment from the "Servo Basic Concepts" eLearning video, document number eLV.ServoMotion.01.BasicConcepts. Also available on You Tube . Duration: 2 minutes. Rev Number: 1.00 Language: English Product Group: Servo Products Product Line: CACR-HR, CACR-IR, CACR-PR, CACR-SR, CPCR-FR, CPCR-MR, CPCR-PF, DR1, DR2, FB5, FB9, General Servo, J02, J03, P09, P12, R01 to R40, S01, S22, SGAGS, SGD, SGDA, SGDB, SGDC, SGDE, SGDF Sigma Mini, SGDG LEGEND, SGDH Sigma II, SGDJ, SGDL, SGDM, SGDS, SGLF Series, SGLG Series, SGLT Series, SGM, SGMAH Sigma II, SGMAJ, SGMAV Sigma-5, SGMB, SGMBH Sigma II, SGMCS Direct Drive, SGMDH Sigma II, SGME, SGMG, SGMGH Sigma II, SGMGV Sigma-5, SGMJV Sigma-5, SGML, SGMM Sigma Mini, SGMMV Sigma-5 Mini, SGMP, SGMPH Sigma II, SGMPS, SGMS, SGMSH Sigma II, SGMSV Sigma-5, SGMUH Sigma II, SGMVH, SGMVV Sigma-5, Sigma FSP, Sigma Trac, SGT Sigma Trac, STF Sigma Trac, SigmaWin Plus Software, SigmaWin100-200 Software, SJDE Junma, SJME Junma, SVMON Software, T01, T03, T06, UGCMED, UGCMFD, UGFMED, UGHMED, UGHMFD, UGJMED, UGMMEM, UGMMKR, UGPMED, UGPMEE, UGPMEG, UGPMEM, UGPMEN or PMEN, UGPMES or PMES, UGPMFE, UGQMEM, UGRMEM, UGTMEM, USACEM, USADED, USAFED, USAGED, USAMED, USAPEM, USAREM, USASEM, VS808 Series, SGDV Analog, SGDV EtherCAT, SGDV MECHATROLINK-II, SGDV MECHATROLINK-III, SGDV MP2600iec, SGLF2 Series, Sigma Trac II, Network-Comm-EtherCAT, Network-Comm-MECHATROLINK-II Doc Type: Training Documents Doc SubType: eLearning Modules, eLearning Videos Share \| Rate Rate this article :	9.9MB	04/02/2014
eLearning Video: Servo Basic Concepts - System Power Up eLV.ServoMotion.04.SBC_ServoOn 12.4MB Rev Date:04/02/2014 Watch Video Description: This video illustrates the three stages of servo system power-up (Control Power, Main Power, Servo Enable) .Aimed at the technical person who is new to the world of servos, the video provides a practical overview of AC servo systems and how they are used. This video is a segment from the "Servo Basic Concepts" eLearning video, document number eLV.ServoMotion.01.BasicConcepts. Also available on You Tube . Duration: 2 minutes. Rev Number: 1.00 Language: English Product Group: Servo Products Product Line: CACR-HR, CACR-IR, CACR-PR, CACR-SR, CPCR-FR, CPCR-MR, CPCR-PF, DR1, DR2, FB5, FB9, General Servo, J02, J03, P09, P12, R01 to R40, S01, S22, SGAGS, SGD, SGDA, SGDB, SGDC, SGDE, SGDF Sigma Mini, SGDG LEGEND, SGDH Sigma II, SGDJ, SGDL, SGDM, SGDS, SGLF Series, SGLG Series, SGLT Series, SGM, SGMAH Sigma II, SGMAJ, SGMAV Sigma-5, SGMB, SGMBH Sigma II, SGMCS Direct Drive, SGMDH Sigma II, SGME, SGMG, SGMGH Sigma II, SGMGV Sigma-5, SGMJV Sigma-5, SGML, SGMM Sigma Mini, SGMMV Sigma-5 Mini, SGMP, SGMPH Sigma II, SGMPS, SGMS, SGMSH Sigma II, SGMSV Sigma-5, SGMUH Sigma II, SGMVH, SGMVV Sigma-5, Sigma FSP, Sigma Trac, SGT Sigma Trac, STF Sigma Trac, SigmaWin Plus Software, SigmaWin100-200 Software, SJDE Junma, SJME Junma, SVMON Software, T01, T03, T06, UGCMED, UGCMFD, UGFMED, UGHMED, UGHMFD, UGJMED, UGMMEM, UGMMKR, UGPMED, UGPMEE, UGPMEG, UGPMEM, UGPMEN or PMEN, UGPMES or PMES, UGPMFE, UGQMEM, UGRMEM, UGTMEM, USACEM, USADED, USAFED, USAGED, USAMED, USAPEM, USAREM, USASEM, VS808 Series, SGDV Analog, SGDV EtherCAT, SGDV MECHATROLINK-II, SGDV MECHATROLINK-III, SGDV MP2600iec, SGLF2 Series, Sigma Trac II, Network-Comm-EtherCAT, Network-Comm-MECHATROLINK-II Doc Type: Training Documents Doc SubType: eLearning Modules, eLearning Videos Share \| Rate Rate this article :	12.4MB	04/02/2014
eLearning Video: Servo Basic Concepts - Directional Movement eLV.ServoMotion.05.SBC_Direction 8.7MB Rev Date:04/02/2014 Watch Video Description: This video illustrates practical considerations for servo direction and machine direction.Aimed at the technical person who is new to the world of servos, the video provides a practical overview of AC servo systems and how they are used. This video is a segment from the "Servo Basic Concepts" eLearning video, document number eLV.ServoMotion.01.BasicConcepts. Also available on You Tube . Duration: 1 minute. Rev Number: 1.00 Language: English Product Group: Servo Products Product Line: CACR-HR, CACR-IR, CACR-PR, CACR-SR, CPCR-FR, CPCR-MR, CPCR-PF, DR1, DR2, FB5, FB9, General Servo, J02, J03, P09, P12, R01 to R40, S01, S22, SGAGS, SGD, SGDA, SGDB, SGDC, SGDE, SGDF Sigma Mini, SGDG LEGEND, SGDH Sigma II, SGDJ, SGDL, SGDM, SGDS, SGLF Series, SGLG Series, SGLT Series, SGM, SGMAH Sigma II, SGMAJ, SGMAV Sigma-5, SGMB, SGMBH Sigma II, SGMCS Direct Drive, SGMDH Sigma II, SGME, SGMG, SGMGH Sigma II, SGMGV Sigma-5, SGMJV Sigma-5, SGML, SGMM Sigma Mini, SGMMV Sigma-5 Mini, SGMP, SGMPH Sigma II, SGMPS, SGMS, SGMSH Sigma II, SGMSV Sigma-5, SGMUH Sigma II, SGMVH, SGMVV Sigma-5, Sigma FSP, Sigma Trac, SGT Sigma Trac, STF Sigma Trac, SigmaWin Plus Software, SigmaWin100-200 Software, SJDE Junma, SJME Junma, SVMON Software, T01, T03, T06, UGCMED, UGCMFD, UGFMED, UGHMED, UGHMFD, UGJMED, UGMMEM, UGMMKR, UGPMED, UGPMEE, UGPMEG, UGPMEM, UGPMEN or PMEN, UGPMES or PMES, UGPMFE, UGQMEM, UGRMEM, UGTMEM, USACEM, USADED, USAFED, USAGED, USAMED, USAPEM, USAREM, USASEM, VS808 Series, SGDV Analog, SGDV EtherCAT, SGDV MECHATROLINK-II, SGDV MECHATROLINK-III, SGDV MP2600iec, SGLF2 Series, Sigma Trac II, Network-Comm-EtherCAT, Network-Comm-MECHATROLINK-II Doc Type: Training Documents Doc SubType: eLearning Modules, eLearning Videos Share \| Rate Rate this article :	8.7MB	04/02/2014
eLearning Video: Servo Basic Concepts - Over-Travel eLV.ServoMotion.06.SBC_OverTravel 13.3MB Rev Date:04/02/2014 Watch Video Description: This video demonstrates and explaines limit switch and over-travel sensors.Aimed at the technical person who is new to the world of servos, the video provides a practical overview of AC servo systems and how they are used. This video is a segment from the "Servo Basic Concepts" eLearning video, document number eLV.ServoMotion.01.BasicConcepts. Also available on You Tube . Duration: 2 minutes. Rev Number: 1.00 Language: English Product Group: Servo Products Product Line: CACR-HR, CACR-IR, CACR-PR, CACR-SR, CPCR-FR, CPCR-MR, CPCR-PF, DR1, DR2, FB5, FB9, General Servo, J02, J03, P09, P12, R01 to R40, S01, S22, SGAGS, SGD, SGDA, SGDB, SGDC, SGDE, SGDF Sigma Mini, SGDG LEGEND, SGDH Sigma II, SGDJ, SGDL, SGDM, SGDS, SGLF Series, SGLG Series, SGLT Series, SGM, SGMAH Sigma II, SGMAJ, SGMAV Sigma-5, SGMB, SGMBH Sigma II, SGMCS Direct Drive, SGMDH Sigma II, SGME, SGMG, SGMGH Sigma II, SGMGV Sigma-5, SGMJV Sigma-5, SGML, SGMM Sigma Mini, SGMMV Sigma-5 Mini, SGMP, SGMPH Sigma II, SGMPS, SGMS, SGMSH Sigma II, SGMSV Sigma-5, SGMUH Sigma II, SGMVH, SGMVV Sigma-5, Sigma FSP, Sigma Trac, SGT Sigma Trac, STF Sigma Trac, SigmaWin Plus Software, SigmaWin100-200 Software, SJDE Junma, SJME Junma, SVMON Software, T01, T03, T06, UGCMED, UGCMFD, UGFMED, UGHMED, UGHMFD, UGJMED, UGMMEM, UGMMKR, UGPMED, UGPMEE, UGPMEG, UGPMEM, UGPMEN or PMEN, UGPMES or PMES, UGPMFE, UGQMEM, UGRMEM, UGTMEM, USACEM, USADED, USAFED, USAGED, USAMED, USAPEM, USAREM, USASEM, VS808 Series, SGDV Analog, SGDV EtherCAT, SGDV MECHATROLINK-II, SGDV MECHATROLINK-III, SGDV MP2600iec, SGLF2 Series, Sigma Trac II, Network-Comm-EtherCAT, Network-Comm-MECHATROLINK-II Doc Type: Training Documents Doc SubType: eLearning Modules, eLearning Videos Share \| Rate Rate this article :	13.3MB	04/02/2014
eLearning Video: Servo Basic Concepts - Distance & Position eLV.ServoMotion.07.SBC_DistPos 12.5MB Rev Date:04/02/2014 Watch Video Description: This video discusses the difference between relative distance and absolute positioning moves.Aimed at the technical person who is new to the world of servos, the video provides a practical overview of AC servo systems and how they are used. This video is a segment from the "Servo Basic Concepts" eLearning video, document number eLV.ServoMotion.01.BasicConcepts. Also available on You Tube . Duration: 2 minutes. Rev Number: 1.00 Language: English Product Group: Servo Products Product Line: CACR-HR, CACR-IR, CACR-PR, CACR-SR, CPCR-FR, CPCR-MR, CPCR-PF, DR1, DR2, FB5, FB9, General Servo, J02, J03, P09, P12, R01 to R40, S01, S22, SGAGS, SGD, SGDA, SGDB, SGDC, SGDE, SGDF Sigma Mini, SGDG LEGEND, SGDH Sigma II, SGDJ, SGDL, SGDM, SGDS, SGLF Series, SGLG Series, SGLT Series, SGM, SGMAH Sigma II, SGMAJ, SGMAV Sigma-5, SGMB, SGMBH Sigma II, SGMCS Direct Drive, SGMDH Sigma II, SGME, SGMG, SGMGH Sigma II, SGMGV Sigma-5, SGMJV Sigma-5, SGML, SGMM Sigma Mini, SGMMV Sigma-5 Mini, SGMP, SGMPH Sigma II, SGMPS, SGMS, SGMSH Sigma II, SGMSV Sigma-5, SGMUH Sigma II, SGMVH, SGMVV Sigma-5, Sigma FSP, Sigma Trac, SGT Sigma Trac, STF Sigma Trac, SigmaWin Plus Software, SigmaWin100-200 Software, SJDE Junma, SJME Junma, SVMON Software, T01, T03, T06, UGCMED, UGCMFD, UGFMED, UGHMED, UGHMFD, UGJMED, UGMMEM, UGMMKR, UGPMED, UGPMEE, UGPMEG, UGPMEM, UGPMEN or PMEN, UGPMES or PMES, UGPMFE, UGQMEM, UGRMEM, UGTMEM, USACEM, USADED, USAFED, USAGED, USAMED, USAPEM, USAREM, USASEM, VS808 Series, SGDV Analog, SGDV EtherCAT, SGDV MECHATROLINK-II, SGDV MECHATROLINK-III, SGDV MP2600iec, SGLF2 Series, Sigma Trac II, Network-Comm-EtherCAT, Network-Comm-MECHATROLINK-II Doc Type: Training Documents Doc SubType: eLearning Modules, eLearning Videos Share \| Rate Rate this article :	12.5MB	04/02/2014
eLearning Video: Servo Basic Concepts - Homing eLV.ServoMotion.08.SBC_Homing 14.3MB Rev Date:04/02/2014 Watch Video Description: This video discusses homing to a sensor to find the zero point.Aimed at the technical person who is new to the world of servos, the video provides a practical overview of AC servo systems and how they are used. This video is a segment from the "Servo Basic Concepts" eLearning video, document number eLV.ServoMotion.01.BasicConcepts. Also available on You Tube . Duration: 2 minutes. Rev Number: 1.00 Language: English Product Group: Servo Products Product Line: CACR-HR, CACR-IR, CACR-PR, CACR-SR, CPCR-FR, CPCR-MR, CPCR-PF, DR1, DR2, FB5, FB9, General Servo, J02, J03, P09, P12, R01 to R40, S01, S22, SGAGS, SGD, SGDA, SGDB, SGDC, SGDE, SGDF Sigma Mini, SGDG LEGEND, SGDH Sigma II, SGDJ, SGDL, SGDM, SGDS, SGLF Series, SGLG Series, SGLT Series, SGM, SGMAH Sigma II, SGMAJ, SGMAV Sigma-5, SGMB, SGMBH Sigma II, SGMCS Direct Drive, SGMDH Sigma II, SGME, SGMG, SGMGH Sigma II, SGMGV Sigma-5, SGMJV Sigma-5, SGML, SGMM Sigma Mini, SGMMV Sigma-5 Mini, SGMP, SGMPH Sigma II, SGMPS, SGMS, SGMSH Sigma II, SGMSV Sigma-5, SGMUH Sigma II, SGMVH, SGMVV Sigma-5, Sigma FSP, Sigma Trac, SGT Sigma Trac, STF Sigma Trac, SigmaWin Plus Software, SigmaWin100-200 Software, SJDE Junma, SJME Junma, SVMON Software, T01, T03, T06, UGCMED, UGCMFD, UGFMED, UGHMED, UGHMFD, UGJMED, UGMMEM, UGMMKR, UGPMED, UGPMEE, UGPMEG, UGPMEM, UGPMEN or PMEN, UGPMES or PMES, UGPMFE, UGQMEM, UGRMEM, UGTMEM, USACEM, USADED, USAFED, USAGED, USAMED, USAPEM, USAREM, USASEM, VS808 Series, SGDV Analog, SGDV EtherCAT, SGDV MECHATROLINK-II, SGDV MECHATROLINK-III, SGDV MP2600iec, SGLF2 Series, Sigma Trac II, Network-Comm-EtherCAT, Network-Comm-MECHATROLINK-II Doc Type: Training Documents Doc SubType: eLearning Modules, eLearning Videos Share \| Rate Rate this article :	14.3MB	04/02/2014
eLearning Video: Servo Basic Concepts - Actuators eLV.ServoMotion.09.SBC_Actuators 11.6MB Rev Date:04/02/2014 Watch Video Description: This video describes practical considerations for linear and rotary actuators.Aimed at the technical person who is new to the world of servos, the video provides a practical overview of AC servo systems and how they are used. This video is a segment from the "Servo Basic Concepts" eLearning video, document number eLV.ServoMotion.01.BasicConcepts. Also available on You Tube . Duration: 2 minutes. Rev Number: 1.00 Language: English Product Group: Servo Products Product Line: CACR-HR, CACR-IR, CACR-PR, CACR-SR, CPCR-FR, CPCR-MR, CPCR-PF, DR1, DR2, FB5, FB9, General Servo, J02, J03, P09, P12, R01 to R40, S01, S22, SGAGS, SGD, SGDA, SGDB, SGDC, SGDE, SGDF Sigma Mini, SGDG LEGEND, SGDH Sigma II, SGDJ, SGDL, SGDM, SGDS, SGLF Series, SGLG Series, SGLT Series, SGM, SGMAH Sigma II, SGMAJ, SGMAV Sigma-5, SGMB, SGMBH Sigma II, SGMCS Direct Drive, SGMDH Sigma II, SGME, SGMG, SGMGH Sigma II, SGMGV Sigma-5, SGMJV Sigma-5, SGML, SGMM Sigma Mini, SGMMV Sigma-5 Mini, SGMP, SGMPH Sigma II, SGMPS, SGMS, SGMSH Sigma II, SGMSV Sigma-5, SGMUH Sigma II, SGMVH, SGMVV Sigma-5, Sigma FSP, Sigma Trac, SGT Sigma Trac, STF Sigma Trac, SigmaWin Plus Software, SigmaWin100-200 Software, SJDE Junma, SJME Junma, SVMON Software, T01, T03, T06, UGCMED, UGCMFD, UGFMED, UGHMED, UGHMFD, UGJMED, UGMMEM, UGMMKR, UGPMED, UGPMEE, UGPMEG, UGPMEM, UGPMEN or PMEN, UGPMES or PMES, UGPMFE, UGQMEM, UGRMEM, UGTMEM, USACEM, USADED, USAFED, USAGED, USAMED, USAPEM, USAREM, USASEM, VS808 Series, SGDV Analog, SGDV EtherCAT, SGDV MECHATROLINK-II, SGDV MECHATROLINK-III, SGDV MP2600iec, SGLF2 Series, Network-Comm-EtherCAT, Network-Comm-MECHATROLINK-II Doc Type: Training Documents Doc SubType: eLearning Modules, eLearning Videos Share \| Rate Rate this article :	11.6MB	04/02/2014

Showing 15 results.

Node: lr1

Rate