SGMBH Sigma II

SGMBH Sigma II - YAI

Rated Output: 22kW, 30kW, 37kW, 45kW, and 55kW

The SGMBH servomotor series had an internal permanent magnet (IPM) design which reduced rotor inertia. This servo motor was well suited for highly dynamic, high power applications such as hydraulic system replacement. There were 5 sizes from 22 kW to 55 kW providing up to 6,120 lb-in (700 Nm) of peak torque. 400 volt windings were available with rated speeds of 1,500 rpm and maximum speeds of 2,000 rpm. A 131,072 ppr incremental serial encoder was standard. Options included a 131,072 ppr absolute encoder, shaft seal, and holding brake.

The SGMBH Sigma II is a Legacy product and is no longer promoted in the Americas.

User Manual

TemplateWeb

eLearning Curriculum

Sort by :

Expand All

Showing 1 to 5 of 14 entries.

Title/Number	File(s)	Rev Date
eLearning Module: Servo Motor Sizing Basics Part 1 - Core Concepts eLM.Servo.02.Sizing1 39.9MB Rev Date:10/30/2017 Watch Video Description: This eLM provides basic servomotor sizing concepts. Topics such as Peak Torque, RMS Torque, Inerita Ratio, and Speed are discussed. The material in this module was published in printed form by Design News. This eLM is also available on the Yaskawa America, Drives and Motion Division YouTube Channel. Duration: 9:45 Rev Number: 2.0 Language: English Product Group: Servo Products Product Line: SGDA, SGDB, SGDC, SGDE, SGDF Sigma Mini, SGDG LEGEND, SGDH Sigma II, SGDJ, SGDM, SGDS, SGLF Series, SGLG Series, SGLT Series, SGM, SGMAH Sigma II, SGMAJ, SGMAV Sigma-5, SGMB, SGMBH Sigma II, SGMCS Direct Drive, SGMG, SGMGH Sigma II, SGMGV Sigma-5, SGMJV Sigma-5, SGMM Sigma Mini, SGMP, SGMPH Sigma II, SGMPS, SGMS, SGMSH Sigma II, SGMSV Sigma-5, SGMUH Sigma II, Sigma FSP, Sigma Trac, SGT Sigma Trac, STF Sigma Trac, SJDE Junma, SJME Junma, SGDV Analog, SGDV EtherCAT, SGDV Indexer, SGDV MECHATROLINK-II, SGDV MECHATROLINK-III, SGDV MP2600iec, SGLF2 Series, SigmaSelect, SGM7E Direct Drive Doc Type: Training Documents Doc SubType: eLearning Modules, eLearning Videos Share \| Rate Rate this article :	39.9MB	10/30/2017
eLearning Module: Servo Motor Sizing Basics Part 2 - Technical eLM.Servo.03.Sizing2 41.1MB Rev Date:07/30/2019 Watch Video Description: This eLM discusses Torque, Motion Profile, Load Inertia, Gearing, Regeneration, and Efficiency as important servo sizing factors. Equations and practical suggestions for motor sizing and machine design are also discussed. This eLM is also available on the Yaskawa America, Drives and Motion Division YouTube Channel. Duration: 17:11 Rev Number: 2.1 Language: English Product Group: Servo Products Product Line: SGDA, SGDB, SGDF Sigma Mini, SGDG LEGEND, SGDH Sigma II, SGDJ, SGDS, SGLF Series, SGLG Series, SGLT Series, SGM, SGMAH Sigma II, SGMAJ, SGMAV Sigma-5, SGMB, SGMBH Sigma II, SGMCS Direct Drive, SGMG, SGMGH Sigma II, SGMGV Sigma-5, SGMJV Sigma-5, SGMM Sigma Mini, SGMP, SGMPH Sigma II, SGMPS, SGMS, SGMSH Sigma II, SGMSV Sigma-5, SGMUH Sigma II, Sigma FSP, Sigma Trac, SGT Sigma Trac, STF Sigma Trac, SJDE Junma, SJME Junma, SGDV Analog, SGDV EtherCAT, SGDV Indexer, SGDV MECHATROLINK-II, SGDV MECHATROLINK-III, SGDV MP2600iec, SGLF2 Series, SigmaSelect, SGM7E Direct Drive Doc Type: Training Documents Doc SubType: eLearning Modules, eLearning Videos Share \| Rate Rate this article :	41.1MB	07/30/2019
eLearning Module: Inertia Ratio by Graphical Analysis with SGDH Sigma II Amplifier eLM.Sigma2.01.InertiaBGA 19.1MB Rev Date:12/12/2016 Description: This eLM describes a step by step process how to use Newton's law F=m*a to find the load inertia by measuring torque and speed of the machine in motion. Yaskawa's Sigma-2 servo, SigmaWin software and "Sigma-2 Parameter Calculator" spreadsheet is used (search yaskawa.com for TN.MCD.06.033). This eLM is also available on the Yaskawa America, Drives and Motion Division YouTube Channel. Duration: 12:04 Rev Number: 1 Language: English Product Group: Servo Products Product Line: SGDH Sigma II, SGDM, SGDS, SGMAH Sigma II, SGMAJ, SGMAV Sigma-5, SGMBH Sigma II, SGMDH Sigma II, SGMGH Sigma II, SGMGV Sigma-5, SGMJV Sigma-5, SGMPH Sigma II, SGMPS, SGMSH Sigma II, SGMSV Sigma-5, SGMUH Sigma II, Sigma Trac, SGT Sigma Trac, STF Sigma Trac, SigmaWin Plus Software, SGDV Analog, SGDV MECHATROLINK-II Doc Type: Training Documents Doc SubType: eLearning Modules, eLearning Videos Share \| Rate Rate this article :	19.1MB	12/12/2016
eLearining Video: Servo Sizing Demystified eLV.Servo.01.SizDemystify 186.2MB Rev Date:04/20/2021 Watch Video Description: This eLV discusses common applications for servomotors, asking the correct questions to size servos, how to avoid common pitfalls and mistakes, the impact of gearboxes on motors, and finally a demo of our SigmaSelect Software. This is a recording of a live webclass. Duration: 1:01:36. Rev Number: 1.00 Language: English Product Group: Servo Products Product Line: General Servo, S7A Gear Motors, S7G Gear Motors, S7J Gear Motors, S7P Gear Motors, SGD7S EtherCAT, SGD7S Analog, SGD7S EtherCAT with FSoE, SGD7S Mechatrolink-III, SGD7S MP2600iec, SGD7S Option Type, SGD7S Sigma-7Siec, SGD7W EtherCAT, SGD7W Mechatrolink-III, SGDH Sigma II, SGDV Indexer, SGDV EtherCAT, SGDV Analog, SGDS, SGDV MECHATROLINK-II, SGDV MECHATROLINK-III, SGDV Mini, SGDV MP2600iec, SGDV SigmaLogic, SGLF Series, SGLF2 Series, SGLG Series, SGLT Series, SGM, SGM7A Sigma-7, SGM7D Direct Drive, SGM7F Direct Drive, SGM7G Sigma-7, SGM7P Sigma-7, SGM7J Sigma-7, SGMAH Sigma II, SGMAJ, SGMAV Sigma-5, SGMB, SGMBH Sigma II, SGMCS Direct Drive, SGMDH Sigma II, SGMDM Sigma II, SGME, SGMG, SGMGH Sigma II, SGMGV Sigma-5, SGMJV Sigma-5, SGML, SGMM Sigma Mini, SGMMV Sigma-5 Mini, SGMP, SGMPH Sigma II, SGMPS, SGMS, SGMSH Sigma II, SGMSV Sigma-5, SGMUH Sigma II, SGMVH, SGMVV Sigma-5, SGT Sigma Trac, Sigma FSP, Sigma Trac, Sigma Trac II, SigmaLogic Software Package, SigmaLogic7 Compact, SigmaLogic7 Modbus, SigmaSelect, SigmaWin Plus 7 Software, SigmaWin Plus Software, SigmaWin100-200 Software, STF Sigma Trac, SGM7E Direct Drive Doc Type: Training Documents Doc SubType: eLearning Modules, eLearning Videos, Training Webcasts Share \| Rate Rate this article :	186.2MB	04/20/2021
eLearning Video: Servo Basic Concepts eLV.ServoMotion.01.BasicConcepts 949.6MB Rev Date:04/15/2024 Watch Video Description: This video provides a practical overview of AC servo systems and their implementation. Aimed at the technical person who is new to the world of servos, this video 1) defines what a servo is and examines its components, 2) explores how a servo works within a motion control system, 3) the concept of a servo "axis", 4) system power up, 5) directional movement, 6) over-travel limit switches 7) distance and position, 8) homing, 9) actuator types. Also available on You Tube and broken up by chapter. Duration: 16 minutes. Rev Number: 3.00 Language: English Product Group: Servo Products Product Line: CACR-HR, CACR-IR, CACR-PR, CACR-SR, CPCR-FR, CPCR-MR, CPCR-PF, DR1, DR2, FB5, FB9, General Servo, J02, J03, P09, P12, R01 to R40, S01, S22, SGAGS, SGD, SGDA, SGDB, SGDC, SGDE, SGDF Sigma Mini, SGDG LEGEND, SGDH Sigma II, SGDJ, SGDL, SGDM, SGDS, SGLF Series, SGLG Series, SGLT Series, SGM, SGMAH Sigma II, SGMAJ, SGMAV Sigma-5, SGMB, SGMBH Sigma II, SGMCS Direct Drive, SGMDH Sigma II, SGME, SGMG, SGMGH Sigma II, SGMGV Sigma-5, SGMJV Sigma-5, SGML, SGMM Sigma Mini, SGMMV Sigma-5 Mini, SGMP, SGMPH Sigma II, SGMPS, SGMS, SGMSH Sigma II, SGMSV Sigma-5, SGMUH Sigma II, SGMVH, SGMVV Sigma-5, Sigma FSP, Sigma Trac, SGT Sigma Trac, STF Sigma Trac, SigmaWin Plus Software, SigmaWin100-200 Software, SJDE Junma, SJME Junma, SVMON Software, T01, T03, T06, UGCMED, UGCMFD, UGFMED, UGHMED, UGHMFD, UGJMED, UGMMEM, UGMMKR, UGPMED, UGPMEE, UGPMEG, UGPMEM, UGPMEN or PMEN, UGPMES or PMES, UGPMFE, UGQMEM, UGRMEM, UGTMEM, USACEM, USADED, USAFED, USAGED, USAMED, USAPEM, USAREM, USASEM, VS808 Series, SGDV Analog, SGDV EtherCAT, SGDV MECHATROLINK-II, SGDV MECHATROLINK-III, SGDV MP2600iec, SGDV Indexer, SGLF2 Series, Sigma Trac II, Network-Comm-EtherCAT, Network-Comm-MECHATROLINK-II Doc Type: Training Documents Doc SubType: eLearning Modules, eLearning Videos Share \| Rate Rate this article :	949.6MB	04/15/2024

Showing 1 to 5 of 14 entries.

Node: dxpprd02:8080

Rating

Rate

SiteSearch

Yaskawa Main Navigation

SGMBH Sigma II

EditContent

Navigation Menu

SGMBH Sigma II

SGMBH Sigma II

SGMBH Sigma II - YAI

Rated Output: 22kW, 30kW, 37kW, 45kW, and 55kW

TemplateWeb

Overview

Support & Training

Documents

Drawings

eLearning Curriculum

Rating

SiteSearch

Americas

Europe/Africa/Middle East

Japan/Asia/Pacific Rim

SiteSearch

SGMBH Sigma II

Breadcrumb

Navigation Menu

SGMBH Sigma II

SGMBH Sigma II

SGMBH Sigma II - YAI

Rated Output: 22kW, 30kW, 37kW, 45kW, and 55kW

TemplateWeb

Overview

Support & Training

Documents

Drawings

Overview

Support & Training

Documents

Drawings

eLearning Curriculum

Rating

SiteSearch