Support

Frequently Asked Questions

Didn't find what you were looking for? Try
  Question Posted Date

What is the difference between STN and TFT on an LCD HMI?

07/13/2004

What is the difference between MODBUS and Memobus?

04/26/2001

What is the difference between Manual Mode and Auto Mode?

09/18/2017

What is the difference between JEPMC-W6060 and JZSP-CKI01 cables?

06/25/2014

What is the difference between a YS-13 and YS-15 cable?

07/13/2004

What is the DeviceNet Network current draw from an NS300 Slave?

08/16/2001

What is the current requirement of the 24VDC control power supply for 400V Sigma II amplifiers?

01/03/2002

What is the current rating for the Run and Fault output contacts on a GPD 515/G5?

07/13/2004

What is the correct procedure to write parameters PnCA0 to PnCA7 with SigmaWin's Write Parameters function?

07/07/2017

What is the correct procedure for MOP or up/down control configuration?

02/17/2016

What is the connectable min. resistance value for F7 drives?

01/24/2014

What is the color code for the JZSP-CVH03 CN8 Safety Cable?

01/09/2018

What is the cause of error code "Error in Native Code Generation" when attempting to compile a MotionWorks IEC program?

10/08/2015

What is the cause of error 440C 1003 (Unable to add axes group to groupIODriver. Check the validity of the handle.)?

12/11/2017

What is the cause of an A.CC Alarm?

08/27/2004

What is the brake power supply tolerance for brake motors?

03/08/2016

What is the best way to correctly use the RETURN instruction? We had some issues in some cases when the Functions blocks get stuck, or needs an additional trigger.

10/06/2011

What is the best method to convert a STRING into a BYTE array and vice versa? Why is this conversion useful?

04/22/2014

What is the battery current draw of the absolute encoder of the Sigma-5 motors with and without control power?

06/18/2013

What is the basic technique for manually tuning a Sigma-5 system with high inertia?

03/06/2014

SAFETY PRECAUTIONS AND INSTRUCTIONS FOR USE OF FAQ INFORMATION!

Please read and understand the product instruction manual before installing, servicing or operating Yaskawa products. FAQ content and illustrations are provided as technical advice to augment the information in manual, not supersede it. It is not possible to give detailed instructions for all types of installation or support activities. The information described in the FAQs are subject to change without notice to improve the product or FAQ. Yaskawa assumes no responsibility for errors or omissions or damages resulting from the use of the information contained in any FAQ. All warnings, cautions and product instruction for product use must be followed. Installation, operation and maintenance should be carried out by qualified personnel. Failure to observe these and other precautions highlighted in the product manuals will expose the user to high voltages resulting in, serious injury or death. Qualified personnel are defined as individuals who are familiar with the installation, starting, operation and maintenance of Yaskawa products of the type described and have proper qualifications to perform the work.