Support

Frequently Asked Questions

Didn't find what you were looking for? Try
  Question Posted Date

What are the steps when switching between motor types with the same Sigma-7 SERVOPACK?

02/07/2019

What are the steps to set up a Mechatrolink or DeviceNet Network on an MP940 with MotionWorks+?

07/13/2004

What are the steps to commissioning an MP930 Machine Control System?

10/26/2005

What are the similarities between MECHATROLINK-II and MECHATROLINK-III?

11/05/2013

What are the remedies when an I/O configuration error is present in MotionWorks IEC?

10/18/2010

What are the recommended programming practices when using function blocks?

09/06/2004

What are the ratings of the P1000?

06/29/2012

What are the R1000 ratings?

07/15/2015

What are the possible causes of communication failure between an HMI and a MP9xx controller?

05/03/2001

What are the pin-outs for SGDH analog monitor connector CN5?

09/21/2004

What are the options for providing Sigma III (SGDS-***12A) Mechatrolink II ServoPack units with absolute encoder battery back-up techniques?

06/25/2013

What are the operator overlay specs?

06/21/2010

What are the new capabilities of DriveWizard Industrial, and will it be backward compatible?

01/14/2019

What are the most important parameters that need to be set to establish motion?

12/17/2001

What are the minimum settings required to start-up a LEGEND SGDG type servo amplifier for use with a linear motor?

07/13/2004

What are the minimum parameters required to start-up a Sigma II SGDH type servo amplifier for use with a linear motor?

07/25/2005

What are the major features and benefits of the LEGEND amplifier (SGDG)? Is an introductory presentation on the product available?

07/30/2003

What are the main causes of the VCF/VCN alarm?

12/20/2014

What are the J1000's ratings?

08/01/2008

What are the functions of INIT, CNFG and SUP/MNT switches on the MPiec controllers?

02/15/2017

SAFETY PRECAUTIONS AND INSTRUCTIONS FOR USE OF FAQ INFORMATION!

Please read and understand the product instruction manual before installing, servicing or operating Yaskawa products. FAQ content and illustrations are provided as technical advice to augment the information in manual, not supersede it. It is not possible to give detailed instructions for all types of installation or support activities. The information described in the FAQs are subject to change without notice to improve the product or FAQ. Yaskawa assumes no responsibility for errors or omissions or damages resulting from the use of the information contained in any FAQ. All warnings, cautions and product instruction for product use must be followed. Installation, operation and maintenance should be carried out by qualified personnel. Failure to observe these and other precautions highlighted in the product manuals will expose the user to high voltages resulting in, serious injury or death. Qualified personnel are defined as individuals who are familiar with the installation, starting, operation and maintenance of Yaskawa products of the type described and have proper qualifications to perform the work.