Support

Frequently Asked Questions

Didn't find what you were looking for? Try
  Question Posted Date

What are the available jumper settings for the SMC-3010?

06/25/2013

What are the advantages of "Serial Command Method" when using an NS600 indexer?

02/20/2003

What are the additional pigtail leads on cables SMCCBLAxx and SMCCBLBxx?

10/20/2006

What are the A1000's ratings?

01/04/2011

What are some tips for operating a single load with multiple servo motors?

03/12/2014

What are some remedies to an A.C9 (Encoder Communications) alarm?

07/13/2004

What are some potential causes of an A.E2 alarm?

06/24/2013

What are some potential causes of an A.84 Alarm?

06/30/2008

What are some possible remedies if the #ININT (Input Interrupt) special label does not work?

06/24/2013

What are some possible causes for and FGN instruction error ?

02/18/2009

What are some of the potential causes of the A.E72 alarm?

02/06/2009

What are some of the potential causes of an A.80 Alarm?

04/12/2006

What are some methods for physical connections (wiring) to the MP920 218IF Ethernet Module?

07/13/2004

What are some issues that would cause a web application to drift when using camming with registration, and what are some remedies to this condition?

07/13/2004

What are some counter-measures to reduce harmonics created by AC drives?

06/08/2007

What are some concerns when the motor cable is over 100 meters?

06/20/2013

What are potential implications of using an Electro-Mechanical Relay or Switching Power Supply in conjunction with a Sigma II Servo System to enable the motor? Can A.C9 and A.E2 alarms be symptoms?

07/13/2004

What are cable leads +BA and -BA used for on cable SMCCBL0XX when using the SMC-4000?

04/10/2006

What applications is the Single Phase Converter appropriate for?

02/08/2018

What Add-On Instructions are available with SigmaLogic?

10/29/2014

SAFETY PRECAUTIONS AND INSTRUCTIONS FOR USE OF FAQ INFORMATION!

Please read and understand the product instruction manual before installing, servicing or operating Yaskawa products. FAQ content and illustrations are provided as technical advice to augment the information in manual, not supersede it. It is not possible to give detailed instructions for all types of installation or support activities. The information described in the FAQs are subject to change without notice to improve the product or FAQ. Yaskawa assumes no responsibility for errors or omissions or damages resulting from the use of the information contained in any FAQ. All warnings, cautions and product instruction for product use must be followed. Installation, operation and maintenance should be carried out by qualified personnel. Failure to observe these and other precautions highlighted in the product manuals will expose the user to high voltages resulting in, serious injury or death. Qualified personnel are defined as individuals who are familiar with the installation, starting, operation and maintenance of Yaskawa products of the type described and have proper qualifications to perform the work.