Support

Frequently Asked Questions

Didn't find what you were looking for? Try
  Question Posted Date

Is there a list of FAQs covering Sigma-5 CoE?

06/26/2013

Is there a guideline on how to use and allocate registers when programming the MP900 series controllers?

03/06/2002

Is there a guideline for selecting a pre-engineered Sigma Trac Linear Motor?

06/24/2013

Is there a function to track your Compass program and your IEC program versions for future support?

05/21/2020

Is there a firmware release history for LEGEND-MC?

06/27/2013

Is there a firmware history for the SMC2000 product?

06/27/2013

Is there a driver available to communicate between an Exor HMI and a Yaskawa Sigma ServoPack?

07/13/2004

Is there a detailed procedure on how to read/write parameters from/to fieldbus NS-300/500 modules?

06/25/2013

Is there a detailed description of the behavior of the IEC functions when EN / ENO are used?

10/09/2015

Is there a demo program available for the SMC-4000 Demo Hardware Unit?

02/18/2009

Is there a cross reference for Omron/Yaskawa servos?

06/15/2010

Is there a compiled list of Sigma II alarms?

07/13/2004

Is there a communication driver available for the SMC controllers?

06/25/2013

Is the P1000 the same physical size as P7?

06/29/2012

Is the MP-940 capable of operating Yaskawa linear motors?

01/14/2005

Is the GA500 conformal coated?

09/30/2019

Is the FP605 conformal coated?

03/30/2022

Is the design life of the V1000 is twice that of the V7

07/27/2007

Is the C-phase marker pulse visible though EtherCAT on the SGDV EtherCAT amplifier?

01/03/2020

Is the Copy function available with the standard LED keypad on the V1000 and V1000-4X drives?

06/21/2010

SAFETY PRECAUTIONS AND INSTRUCTIONS FOR USE OF FAQ INFORMATION!

Please read and understand the product instruction manual before installing, servicing or operating Yaskawa products. FAQ content and illustrations are provided as technical advice to augment the information in manual, not supersede it. It is not possible to give detailed instructions for all types of installation or support activities. The information described in the FAQs are subject to change without notice to improve the product or FAQ. Yaskawa assumes no responsibility for errors or omissions or damages resulting from the use of the information contained in any FAQ. All warnings, cautions and product instruction for product use must be followed. Installation, operation and maintenance should be carried out by qualified personnel. Failure to observe these and other precautions highlighted in the product manuals will expose the user to high voltages resulting in, serious injury or death. Qualified personnel are defined as individuals who are familiar with the installation, starting, operation and maintenance of Yaskawa products of the type described and have proper qualifications to perform the work.