Support

Frequently Asked Questions

Didn't find what you were looking for? Try
  Question Posted Date

Do I need to cycle power when changing communication parameters?

09/30/2019

Do I need a running MP3300iec controller to debug the Compass screens or is software simulation available?

05/21/2020

Do I need an adapter plate when replacing a V1000 with a GA500?

09/27/2019

Do I need a license to run Compass?

04/28/2020

Does Yaskawa supply an EDS file for the MP940D (DeviceNet)?

07/13/2004

Does Yaskawa supply an EDS file for the MP920 [260-IF] DeviceNet module?

07/13/2004

Does Yaskawa sell the SGDM Sigma II amplifier in North America?

07/13/2004

Does Yaskawa offer USB drivers for communicating to the MP2200 CPU-02 from a PC ?

08/13/2013

Does Yaskawa offer software for selecting the best servomotor for a given application?

04/15/2015

Does Yaskawa offer Sigma II power and encoder cables rated for continuous flex?

06/24/2013

Does Yaskawa offer a template program for the MP940 when using MotionWorks+?

06/24/2013

Does Yaskawa manufacture 115VAC single-phase drives for 3 phase motor operation?

06/20/2013

Does Yaskawa have CAD dwgs. available for their servo system cables?

07/13/2004

Does Yaskawa have an example of a successful implementation of Yaskawa Product on a Shrink-Sleeve Labeling machine?

06/15/2010

Does the Z1000 have a USB cable interface (instead of serial) for direct connection to a computer, and do I need anything else?

09/13/2012

Does the V1000-4X meet UL?

06/21/2010

Does the V1000-4X meet NSF?

06/21/2010

Does the V1000-4x meet NEMA 4X?

06/21/2010

Does the V1000-4X meet IP66?

06/21/2010

Does the V1000-4X meet BISSC?

06/21/2010

SAFETY PRECAUTIONS AND INSTRUCTIONS FOR USE OF FAQ INFORMATION!

Please read and understand the product instruction manual before installing, servicing or operating Yaskawa products. FAQ content and illustrations are provided as technical advice to augment the information in manual, not supersede it. It is not possible to give detailed instructions for all types of installation or support activities. The information described in the FAQs are subject to change without notice to improve the product or FAQ. Yaskawa assumes no responsibility for errors or omissions or damages resulting from the use of the information contained in any FAQ. All warnings, cautions and product instruction for product use must be followed. Installation, operation and maintenance should be carried out by qualified personnel. Failure to observe these and other precautions highlighted in the product manuals will expose the user to high voltages resulting in, serious injury or death. Qualified personnel are defined as individuals who are familiar with the installation, starting, operation and maintenance of Yaskawa products of the type described and have proper qualifications to perform the work.