Support

Frequently Asked Questions

Didn't find what you were looking for? Try
  Question Posted Date

Does the Modbus port on the V7 Drive need a termination resistor?

10/27/2005

Does the LEGEND amplifier have a circuit for a brake?

10/20/2006

Does the JUSP-NS500 Profibus Network Indexing module have a GSD file?

06/24/2013

Does the J1000 replace the J7?

09/13/2012

Does the J1000 mount contactor-style, like the J7 did?

08/01/2008

Does the J1000 have dynamic braking capability?

09/13/2012

Does the J1000 have DWEZ capability?

08/01/2008

Does the J1000 have a removable terminal block with parameter copy capability, like the V1000?

09/13/2012

Does the J1000 have any network communications capability?

08/01/2008

Does the GA500 have DC input voltage capability?

09/30/2019

Does the GA500 have a copy keypad feature?

09/30/2019

Does the GA500 automatically back up my parameters?

09/27/2019

Does the D1000 need to be purchased as a kit?

07/15/2015

Does the D1000 have a USB cable interface (instead of serial) for direct connection to a computer, and do I need anything else?

07/15/2015

Does the A1000 have a USB cable interface (instead of serial) for direct connection to a computer, and do I need anything else?

02/29/2012

Does J1000 have UL Listing for single phase?

08/01/2008

Does installation of an AC Drive near a large capacitor bank (power-factor correction) require special consideration?

10/27/2005

Does GA500 offer an integrated EMC filter option?

09/30/2019

Does Compass require MotionWorks IEC Pro or Express?

05/21/2020

Does BACnet support more than 128 addresses?

05/23/2013

SAFETY PRECAUTIONS AND INSTRUCTIONS FOR USE OF FAQ INFORMATION!

Please read and understand the product instruction manual before installing, servicing or operating Yaskawa products. FAQ content and illustrations are provided as technical advice to augment the information in manual, not supersede it. It is not possible to give detailed instructions for all types of installation or support activities. The information described in the FAQs are subject to change without notice to improve the product or FAQ. Yaskawa assumes no responsibility for errors or omissions or damages resulting from the use of the information contained in any FAQ. All warnings, cautions and product instruction for product use must be followed. Installation, operation and maintenance should be carried out by qualified personnel. Failure to observe these and other precautions highlighted in the product manuals will expose the user to high voltages resulting in, serious injury or death. Qualified personnel are defined as individuals who are familiar with the installation, starting, operation and maintenance of Yaskawa products of the type described and have proper qualifications to perform the work.