Support

Frequently Asked Questions

Didn't find what you were looking for? Try
  Question Posted Date

Can the LCD Operator be used for programming and maintenance of the V1000-4X?

06/21/2010

Can the keypad from J7 Drive be removed and installed at a remote location? If yes what is the part no. of the cable and what is the distance it can support?

06/11/2014

Can the JP and JS commands do more than jump to a specified label?

07/13/2004

Can the J7 Drive be used with a single-phase, 100V input?

11/28/2005

Can the GPD 515/G5 do closed loop speed control?

07/13/2004

Can the GPD 506/P5 be programmed in other languages?

10/11/2004

Can the GA500’s standard keypad be remote mounted?

09/30/2019

Can the G5 GPD515 drive in flux vector mode can run above 1750 RPM/60 Hz. If so what parameters would need to be changed to accomplish this. We only want to go to 2100 RPM/72 Hz.

10/26/2005

Can the EtherCAT module report a modulo value?

06/11/2018

Can the E7 keypad display cooling fan operating hours? (for maintenance purposes)

06/08/2007

Can the DriveWizard .PARMS files be viewed without running the DriveWizard program?

09/13/2012

Can the default forward direction of the linear motor be changed?

12/22/2011

Can the decimal or binary value of multiple inputs be read and compared?

07/13/2004

Can the CN-8 Jumper plug from the SGDV SERVOPACK be used to bypass the CN-21 or CN-22 advanced safety module input?

03/02/2015

Can the CN8 connection be used with the Sigma-7 400V Safety Option Module (SGDV-OSA01A000FT900)?

01/30/2020

Can the brake coil of a brake-motor be put directly across the motor winding when the motor is run by a VFD?

10/27/2005

Can the 600V models of the A1000 and P1000 be used with a 690VAC input voltage?

01/03/2011

Can the 'run' contact output of the GPD 515/G5 be used to release a mechanical brake?

07/13/2004

Can subroutines be called from "L" or "H" drawings?

03/05/2002

Can SigmaWin+ be used to find the EtherCAT firmware version of an SGD7 EtherCAT SERVOPACK?

11/10/2017

SAFETY PRECAUTIONS AND INSTRUCTIONS FOR USE OF FAQ INFORMATION!

Please read and understand the product instruction manual before installing, servicing or operating Yaskawa products. FAQ content and illustrations are provided as technical advice to augment the information in manual, not supersede it. It is not possible to give detailed instructions for all types of installation or support activities. The information described in the FAQs are subject to change without notice to improve the product or FAQ. Yaskawa assumes no responsibility for errors or omissions or damages resulting from the use of the information contained in any FAQ. All warnings, cautions and product instruction for product use must be followed. Installation, operation and maintenance should be carried out by qualified personnel. Failure to observe these and other precautions highlighted in the product manuals will expose the user to high voltages resulting in, serious injury or death. Qualified personnel are defined as individuals who are familiar with the installation, starting, operation and maintenance of Yaskawa products of the type described and have proper qualifications to perform the work.