Support

Frequently Asked Questions

Didn't find what you were looking for? Try
  Question Posted Date

Can SigmaSize be used to select motors for rotary tables or other applications with loads which don't rotate about the center of the motor shaft?

09/21/2004

Can PLCs and controllers from different manufacturers communicate to the same HMI unit?

05/04/2001

Can output current be monitored via Analog Output?

06/20/2013

Can multiple motors be used with a single inverter?

06/20/2013

Can multiple HMI units be wired together in a network to communicate with each other?

05/03/2001

Can MotionWorks IEC Versions 1.x or 2.x be installed on a virtual machine?

12/15/2014

Can MotionWorks IEC Versions 1.x or 2.x be installed on a computer running Windows Server?

12/15/2014

Can MotionWorks IEC Project Archives be created Offline?

02/22/2017

Can JUSP-NS100 (Sigma II, Mechatrolink I option module) and JUSP-NS115 (Sigma II, Mechatrolink II option module) co-exist on the same network with an MP2000 series controller as the master?

12/19/2006

Can I use the single-turn absolute position of a Sigma-7 motor without a battery even though I have a multiturn absolute encoder?

02/01/2017

Can I use the Single Phase Converter (SPC) with the GA500?

09/30/2019

Can I use the R1000 with the GA500?

09/30/2019

Can I use the app on a phone or tablet running iOS or Android?

08/03/2018

Can I reuse the option card that's installed on my V1000 on the GA500? Or do I need to purchase a new card?

11/04/2019

Can I program the GA500 without any type of power applied to the drive?

09/26/2019

Can I DIN rail mount the GA500?

09/30/2019

Can I control Start/Stop of my drive by just applying and removing input power?

07/13/2004

Can I connect my smartphone or tablet to the GA500?

09/30/2019

Can CAM profiles/recipes reside in the SMC motion controller and how many separate points of data are possible?

01/21/2005

Can cam data be imported into SigmaSelect when using Blend Mode in MotionWorks IEC Cam Editor?

12/15/2014

SAFETY PRECAUTIONS AND INSTRUCTIONS FOR USE OF FAQ INFORMATION!

Please read and understand the product instruction manual before installing, servicing or operating Yaskawa products. FAQ content and illustrations are provided as technical advice to augment the information in manual, not supersede it. It is not possible to give detailed instructions for all types of installation or support activities. The information described in the FAQs are subject to change without notice to improve the product or FAQ. Yaskawa assumes no responsibility for errors or omissions or damages resulting from the use of the information contained in any FAQ. All warnings, cautions and product instruction for product use must be followed. Installation, operation and maintenance should be carried out by qualified personnel. Failure to observe these and other precautions highlighted in the product manuals will expose the user to high voltages resulting in, serious injury or death. Qualified personnel are defined as individuals who are familiar with the installation, starting, operation and maintenance of Yaskawa products of the type described and have proper qualifications to perform the work.