Support

Frequently Asked Questions

Didn't find what you were looking for? Try
  Question Posted Date

BUS -- Fault Code Description

06/08/2007

BB -- Fault Code Description

06/08/2007

bb -- Fault Code Description

06/08/2007

At what uplink speeds is the MP2600iec controller capable of communicating?

09/22/2016

A Siemens Apogee FLN option board is installed on GPD506 bypass drive so a run command can be initiated through network communications. After a safety circuit fault has been reset, the drive will not run again even though it has been commanded to. Why is this happening?

06/12/2014

Are V7 Options compatible with V1000? Can V1000 Options be used with V7?

07/27/2007

Are V74X Options compatible with V1000-4X?

06/21/2010

Are V1000 Options compatible with V1000-4X?

06/21/2010

Are the V1000 network communications full function Modbus or Yaskawa standard?

07/27/2007

Are the V1000 and V1000-4X the same physical size as the V7?

07/27/2007

Are the SMC-2000 and LEGEND-MC controllers capable of performing S-Curve profiling?

08/03/2001

Are there plans for a dedicated 600V micro-drive?

01/03/2011

Are there plans for a 600V Z1000U drive?

01/21/2015

Are there plans for 600V versions of D1000 and R1000?

07/15/2015

Are there any troubleshooting guides for the NS300 Devicenet Indexer Card?

07/13/2004

Are there any tools to monitor or troubleshoot MP920 and MP940 function blocks operation?

02/22/2005

Are there any third party HMI Manufacturers that have written Memobus Drivers for the Yaskawa MP9xx products?

04/11/2006

Are there any special setup considerations concerning machine vibration when using Junma?

08/15/2011

Are there any special considerations when using an absolute encoder?

06/05/2002

Are there any settings to improve the performance of the MPiec Machine Operations webpage? I get various error messages when attempting to view this page.

05/22/2013

SAFETY PRECAUTIONS AND INSTRUCTIONS FOR USE OF FAQ INFORMATION!

Please read and understand the product instruction manual before installing, servicing or operating Yaskawa products. FAQ content and illustrations are provided as technical advice to augment the information in manual, not supersede it. It is not possible to give detailed instructions for all types of installation or support activities. The information described in the FAQs are subject to change without notice to improve the product or FAQ. Yaskawa assumes no responsibility for errors or omissions or damages resulting from the use of the information contained in any FAQ. All warnings, cautions and product instruction for product use must be followed. Installation, operation and maintenance should be carried out by qualified personnel. Failure to observe these and other precautions highlighted in the product manuals will expose the user to high voltages resulting in, serious injury or death. Qualified personnel are defined as individuals who are familiar with the installation, starting, operation and maintenance of Yaskawa products of the type described and have proper qualifications to perform the work.