Support

Frequently Asked Questions

Didn't find what you were looking for? Try
  Question Posted Date

Can I use the R1000 with the GA500?

09/30/2019

Can I use the app on a phone or tablet running iOS or Android?

08/03/2018

Can I reuse the option card that's installed on my V1000 on the GA500? Or do I need to purchase a new card?

11/04/2019

Can I program the GA500 without any type of power applied to the drive?

09/26/2019

Can I program the FP605 without any type of power applied to the drive?

04/06/2022

Can I program HV600 wirelessly via Bluetooth?

07/20/2020

Can I order power option 8 (Motor terminal block) with power option H (output reactor)?

02/17/2023

Can I order an input/output reactor with my FP605 configured package?

02/17/2023

Can I have a Bluetooth keypad install in my FP605 bypass or configured package?

02/17/2023

Can I DIN rail mount the GA500?

09/30/2019

Can I control Start/Stop of my drive by just applying and removing input power?

07/13/2004

Can I connect my smartphone or tablet to the GA500?

09/30/2019

Can I connect my smartphone or tablet to the FP605?

04/07/2022

Can CAM profiles/recipes reside in the SMC motion controller and how many separate points of data are possible?

01/21/2005

Can cam data be imported into SigmaSelect when using Blend Mode in MotionWorks IEC Cam Editor?

12/15/2014

Can a smooth shaft Yaskawa motor be replaced with one that has keyway shaft?

01/04/2002

Can a single HMI be used to communicate to multiple controllers?

05/22/2001

Can a SGD7S Analog SERVOPACK in speed control with an analog voltage reference use a sequence input to change the running Servomotor direction?

02/15/2017

Can a servomotor be energized while it is moving?

07/31/2001

Can a remote Hand/Off/Auto switch be connected to the E7B product?

06/08/2007

SAFETY PRECAUTIONS AND INSTRUCTIONS FOR USE OF FAQ INFORMATION!

Please read and understand the product instruction manual before installing, servicing or operating Yaskawa products. FAQ content and illustrations are provided as technical advice to augment the information in manual, not supersede it. It is not possible to give detailed instructions for all types of installation or support activities. The information described in the FAQs are subject to change without notice to improve the product or FAQ. Yaskawa assumes no responsibility for errors or omissions or damages resulting from the use of the information contained in any FAQ. All warnings, cautions and product instruction for product use must be followed. Installation, operation and maintenance should be carried out by qualified personnel. Failure to observe these and other precautions highlighted in the product manuals will expose the user to high voltages resulting in, serious injury or death. Qualified personnel are defined as individuals who are familiar with the installation, starting, operation and maintenance of Yaskawa products of the type described and have proper qualifications to perform the work.