Support

Yaskawa provides support for all of its products on a global basis. This website supports customers of Yaskawa America, Inc. - Drives & Motion Division serving North, South, and Central America. VIDEO: Aftermarket Services Overview

Solution Center
Visit the Yaskawa Solution Center, a self-service portal providing all the functionality and content needed to resolve issues immediately, 24/7. View Solution Center Quick Tips

Technical Support:

United States
Phone:1-800-YASKAWA (927-5292),
dial 2 or 1-847-887-7457, dial 2
Drives Hours: 7am-7pm (CT) M-F
Motion & CNC Hours: 8am-5pm (CT) M-F
Email: technical_support@yaskawa.com
Online: Submit Support Request

Canada, Mexico, Central and South America
View Contact Information

After Hours Emergency Support
24/7 including holidays

Yaskawa Solution Center

Experience Extra

Frequently Asked Questions

Product Group

Product

Sub-Topic

Applications

Clear

Sort by :

Expand All

Didn't find what you were looking for? Try

Showing 871 - 900 of 1,102 results.

	Question	Posted Date
	Do I need a running MP3300iec controller to debug the Compass screens or is software simulation available? Posted Date: 05/21/2020 Answer: MP3300iec controller is required to debug, no software simulation is offered at this time. Product Group/Line: Yaskawa Compass, Controllers Topic/Sub Topic: Software, Ask a Technical Question Document Number: CNT-86O53E Published Date: 05/21/2020 Share \| Rate Rate this article :	05/21/2020
	Do I need an adapter plate when replacing a V1000 with a GA500? Posted Date: 09/27/2019 Answer: The GA500 has the same dimensions and mounting holes as a V1000. No adapter plate is necessary when replacing a V1000 with a GA500. Product Group/Line: Inverter Drives, GA500 Drive, V1000 Drive Topic/Sub Topic: Ask a Technical Question, Product Launch Document Number: INV-ED12M6 Published Date: 09/27/2019 Share \| Rate Rate this article :	09/27/2019
	Does Yaskawa supply an EDS file for the MP940D (DeviceNet)? Posted Date: 07/13/2004 Answer: Yes. However, the MP940D DeviceNet I/O is fully configurable (from one byte to 256 bytes in & one byte to 256 bytes out), and is considered a "communications adapter." An EDS file is not really necessary, because the MP940D does not have fixed I/O configuration, nor does it require explicit messaging for set-up. There are three example EDS files attached in the zip file. The first is the "official" EDS file that contains no data regarding I/O configuration. This is the file the ODVA certified file for the MP940D. The I/O must be configured properly in the MP940D and the attached Master (or slaves if the MP940D is the master). The second and third files were created as examples with Rockwell's DeviceNet manager software as stub files for the MP940D as a DeviceNet slave, with 8 bytes in/8 bytes out and 16 bytes in/16 bytes out, respectively. Again, the MP940D can be configured for any number of bytes in/out from one to 256. 1) MP940DNET.eds - Original EDS file for MP940/260-IF 2) mp940d_8bytes.eds - EDS stub that was created for 8 bytes in / 8 bytes out 3) mp940d_16bytes.eds - EDS stub that was created for 16 bytes in / 16 bytes out The MP940D supports Polled and Strobed I/O. Explicit Messaging is also available. However, some additional ladder code must be written to take advantage of this. Please refer to the MP940 Hardware manual [YEA-SIA-C887-4.1] for further configuration information. Currently, MotionWorks supports all of the above modes of operation. MotionWorks+ [Version 2.56] supports the above with two exceptions; 1) No Strobed I/O support, 2) No Explicit Messaging Support. Attachments: 2KB Product Group/Line: Controllers, MP940 Machine Controller Topic/Sub Topic: Ask a Technical Question, Integration, Network Communications, Specifications, Start Up - Installation Document Number: MNEN-5CJMRY Published Date: 07/13/2004 Share \| Rate Rate this article :	07/13/2004
	Does Yaskawa supply an EDS file for the MP920 [260-IF] DeviceNet module? Posted Date: 07/13/2004 Answer: Yes. However, the MP920 [260-IF] DeviceNet I/O is fully configurable (from one byte to 256 bytes in & one byte to 256 bytes out), and is considered a "communications adapter." An EDS file is not really necessary, because the MP920/260-IF does not have fixed I/O configuration, nor does it require explicit messaging for set-up. There are three example EDS files attached in the attached zip file. The first is the "official" EDS file that contains no data regarding I/O configuration. This is the ODVA certified EDS file for the MP920 [260-IF]. The I/O must be configured properly in the MP920 [260-IF] and the attached Master (or slaves in the case of the MP920 [260-IF] being the master). The second and third files were created as examples with Rockwell's DeviceNet manager software (stub files) for the MP920/260-IF as a DeviceNet slave, with 8 bytes in/8 bytes out and 16 bytes in/16 bytes out, respectively. Again, the MP920/260-IF can be configured for an number of bytes in/out from one to 256. 1) MP940DNET.eds - Original EDS file for MP940/260-IF 2) mp940d_8bytes.eds - EDS stub that was created for 8 bytes in / 8 bytes out 3) mp940d_16bytes.eds - EDS stub that was created for 16 bytes in / 16 bytes out The MP920 [260-IF] supports Polled and Strobed I/O. Explicit Messaging is also possible. However, additional ladder code is required. Please refer to the 260IF DeviceNet System User's manual [SIEZ-C887-5.2] for further configuration information. (Note: The EDS files are the same as those for the MP940 module) Attachments: 2KB Product Group/Line: Controllers, MP920 Machine Controller Topic/Sub Topic: Ask a Technical Question, Start Up - Installation, Integration, Network Communications, Specifications Document Number: MNEN-5CJMRW Published Date: 07/13/2004 Share \| Rate Rate this article :	07/13/2004
	Does Yaskawa sell the SGDM Sigma II amplifier in North America? Posted Date: 07/13/2004 Answer: The SGDM amplifier is a non-expandable Sigma II amplifier. It is sold only in Asia. However, the SGDH Sigma II amplifier is identical, except that the SGDH amplifier has a port on the side of the amplifier to interface with option cards such as the NS600 or MP940. If an imported machine (likely built in Asia) has an SGDM and needs a replacement amplifier, the SGDH can be used. It has exactly the same parameter set, runs exactly the same motors, and has exactly the same footprint. An expansion port protrudes 8mm from the side of the SGDH, but this is not a problem if the amplifiers were properly spaced (min. 10mm between amplifiers) in the cabinet. The part number for the SGDM amplifier follows this convention: SGDM-WWXYZ, where WW is the amplifier power rating (i.e. '04' for 400W or '55' for 5.5 kW), X is a letter determining input voltage (A= 200VAC, B=100VAC, D=400VAC), Y is the control code (usually 'D'), and Z is an optional revision level (usually either blank or 'A'). The replacement motor will be SGDH-wwxE, where ww is the same amplifier power rating and x is the same input voltage letter as the SGDM. For example, an SGDM-02BD would cross-reference to a SGDH-02BE and an SGDM-50ADA would cross to a SGDH-50AE. Product Group/Line: Servo Products, SGDH Sigma II Topic/Sub Topic: Ask a Technical Question, Maintenance, Parts or Replacement, Warranty Document Number: MWIR-5NKK29 Published Date: 07/13/2004 Share \| Rate Rate this article :	07/13/2004
	Does Yaskawa offer USB drivers for communicating to the MP2200 CPU-02 from a PC ? Posted Date: 08/13/2013 Answer: -Internal FAQ only until product released- Yes, Yaskawa provides drivers for fully compliant USB 2.0 connectivity. Requirements: MotionWorks MPE720 version 5.31B or later Operating Systems Supported: Windows98/2000/XP Professional USB Cable (Series A for PC on one end and Series mini-B on the other end to connect to the MP2200 CPU-02) Please see the attached document [C02.pdf] for installation, configuration, and connectivity instructions. The required driver files are included in the attached "USB.zip" archive. Attachments: 3KB 12KB 17KB 801KB Product Group/Line: Controllers, MotionWorks Software, MP2000 Series (MP2300-MP2200), MP2200 Topic/Sub Topic: Ask a Technical Question, Operation, Programming, Software Document Number: MTN-6HTU9S Published Date: 08/13/2013 Share \| Rate Rate this article :	08/13/2013
	Does Yaskawa offer software for selecting the best servomotor for a given application? Posted Date: 04/15/2015 Answer: Yaskawa provides a software package called SigmaSelect that can be used to select the best size rotary or linear servomotor for an application. SigmaSelect is very flexible and allows a wide variety of applications to be sized. After the motor has been properly sized, SigmaSelect will also guide the selection of other parts, such as the servopack, cables, and accessories. SigmaSelect is available at no cost. It can be downloaded at yaskawa.com. Product Group/Line: Servo Products, SGDV Analog, SGDV EtherCAT, SGDV Indexer, SGDV MECHATROLINK-II, SGDV MECHATROLINK-III, SGDV SigmaLogic Topic/Sub Topic: Ask a Technical Question, Sizing, Upload - download software Document Number: MNEN-5CJMSQ Published Date: 04/15/2015 Share \| Rate Rate this article :	04/15/2015
	Does Yaskawa offer Sigma II power and encoder cables rated for continuous flex? Posted Date: 06/24/2013 Answer: Yes. Many applications require cables that are more flexible than a standard cable. As a result, Yaskawa has introduced continuous flex rated cables for Sigma II motors up to 11kW (see attached document for complete cable specification summary for Sigma II). SGMAH and SGMPH motors feature continuous flex rated power and encoder cable assemblies as standard. For the larger SGMGH, SGMSH, and SGMUH motors typically installed in a static environment where physical movement of the motor is less likely, the standard cable remains a non-flex rated cable. Continuous flex rated cables are available for both power and encoder simply by specifying the 'CE' version of the cable [e.g., B1CE-03(A) instead of B1E-03(A)]. Continuous flex rated cable is manufactured to meet varying needs and requires proper application and installation to achieve the desired results. Testing methods vary by manufacturer, however, two key parameters are routinely published by cable manufacturers which can be used to calculate cable life (# of cycles) based on a design target of 10,000,000 cycles. They are: * Cable outside diameter (OD) * Minimum bending radius as a function of cable outside diameter (e.g., 10 X OD) If the minimum bend radius is too large, or a larger bend radius is acceptable, the effect on approximate cable life can be calculated as a function of the 10,000,000 cycle design target. The relationship between cable longevity and bending radius is non-linear. When calculating life cycle, the term "approximate maximum" is best suited to describe the resulting calculation. Use the following as a guideline for such calculations. 1) (Cable radius / Radius of Bend) x 100 = xx%. If xx% is less than 2%, the 10,000,000 cycle mark is approached. 2) Take the calculated xx% and calculate this ratio relative to the 2% design target. (2%) / (xx%) = Ratio of chosen bend radius relative to design target. 3) Multiply this ratio by 10,000,000 to calculate the approximate maximum number of cycles. Here is one example. Cable OD = 50mm. Minimum bending radius is 10 X OD. This means the minimum bend radius is 500 mm. This may be too large. Assume bend radius of only 400mm is possible. Thus, (25 mm / 400 mm) x 100% = 6.25%. (2%) / (6.25%) = 0.32 x 10,000,000 = 3,200,000 approximate cycles. Product Group/Line: Servo Products, SGDH Sigma II, SGMAH Sigma II, SGMGH Sigma II, SGMPH Sigma II, SGMSH Sigma II Topic/Sub Topic: Ask a Technical Question, Wiring Document Number: MNEN-5CJMHS Published Date: 06/24/2013 Share \| Rate Rate this article :	06/24/2013
	Does Yaskawa offer a template program for the MP940 when using MotionWorks+? Posted Date: 06/24/2013 Answer: Yes - Please see attached two zip files: MW+ Template Prog_02282002.zip Contains full MW+ example program. MotionWorks+ Template Program.pdf Full text (word document) description of above program. The template was created with the following equipment: MotionWorks+ Version 2.56 [SystemLadder 224] or later MP940 Firmware Version A05 SGDH Firmware Version 14 The attached program was created for the Yaskawa MP940 Demonstrator units. (YEA Part # DEMO4700) This template offers full capability and demonstrates the use of many features. Attachments: 410KB 147KB Product Group/Line: Controllers, MotionWorks Plus Software, MP940 Machine Controller Topic/Sub Topic: Ask a Technical Question, Application Example, Programming, Software, Start Up - Installation Document Number: MMIR-5CM5LM Published Date: 06/24/2013 Share \| Rate Rate this article :	06/24/2013
	Does Yaskawa have CAD dwgs. available for their servo system cables? Posted Date: 07/13/2004 Answer: Yes. Go to ftp://ftp.yaskawa.com/public/development/Servo/Cables/ Here you will find cable drawings (.dwg) for Sigma I, Sigma II, Sigma Mini, and select MP products. The Read Me folder contains instructions for downloading Volo Viewer (free) which will allow viewing of .dwg files without using AutoCad. Product Group/Line: Servo Products, SGDH Sigma II Topic/Sub Topic: Ask a Technical Question, Specifications, Wiring Document Number: MNEN-5CJMNL Published Date: 07/13/2004 Share \| Rate Rate this article :	07/13/2004
	Does Yaskawa have an example of a successful implementation of Yaskawa Product on a Shrink-Sleeve Labeling machine? Posted Date: 06/15/2010 Answer: http://www.packagingdigest.com/articles/200511/30.php Marzetti dresses up with shrink sleeves A new shrink-sleeve labeler at T. Marzetti Co. applies labels to updated 15- and 24-ounce 'soft-square' glass bottles of produce dressings at speeds to 160 per minute. See full article in attached .PDF file. Attachments: 239KB Product Group/Line: Controllers, Servo Products, MP2300, SGDH Sigma II Topic/Sub Topic: Ask a Technical Question, Application Example, Applications Document Number: MTN-6J2T8G Published Date: 06/15/2010 Share \| Rate Rate this article :	06/15/2010
	Does the Z1000 have a USB cable interface (instead of serial) for direct connection to a computer, and do I need anything else? Posted Date: 09/13/2012 Answer: Yes, the Z1000 has a USB Type B port for quick and easy PC Connection. Product Group/Line: Inverter Drives, Z1000 Drive Topic/Sub Topic: Ask a Technical Question, Procedure - Policy Document Number: DRV-8P2Q9X Published Date: 09/13/2012 Share \| Rate Rate this article :	09/13/2012
	Does the V1000-4X meet UL? Posted Date: 06/21/2010 Answer: Yes. Product Group/Line: Inverter Drives, V1000-4X Drive Topic/Sub Topic: Ask a Technical Question, Specifications Document Number: DRV-86MQP5 Published Date: 06/21/2010 Share \| Rate Rate this article :	06/21/2010
	Does the V1000-4X meet NSF? Posted Date: 06/21/2010 Answer: No. Product Group/Line: Inverter Drives, V1000-4X Drive Topic/Sub Topic: Ask a Technical Question, Specifications Document Number: DRV-86MQSA Published Date: 06/21/2010 Share \| Rate Rate this article :	06/21/2010
	Does the V1000-4x meet NEMA 4X? Posted Date: 06/21/2010 Answer: Yes. Product Group/Line: Inverter Drives, V1000-4X Drive Topic/Sub Topic: Ask a Technical Question, Specifications Document Number: DRV-86MQV7 Published Date: 06/21/2010 Share \| Rate Rate this article :	06/21/2010
	Does the V1000-4X meet IP66? Posted Date: 06/21/2010 Answer: Yes. Product Group/Line: Inverter Drives, V1000-4X Drive Topic/Sub Topic: Ask a Technical Question, Specifications Document Number: DRV-86MQQT Published Date: 06/21/2010 Share \| Rate Rate this article :	06/21/2010
	Does the V1000-4X meet BISSC? Posted Date: 06/21/2010 Answer: No. Product Group/Line: Inverter Drives, V1000-4X Drive Topic/Sub Topic: Ask a Technical Question, Specifications Document Number: DRV-86MQSG Published Date: 06/21/2010 Share \| Rate Rate this article :	06/21/2010
	Does the torque limit (sLimit_Torque) need to be set on the MP940? Posted Date: 05/02/2001 Answer: Properly setting the torque limit is a very important step in commissioning an MP940 system. The MP940 requires this information to be set to match the data set in the servopack controller. If the torque limit is not properly set (ie - if the values in servopack and MP940 do not match), the MP940 will indicate an error displaying an A.9F alarm. This condition can be diagnosed by observing two error parameters from within MotionWorks+: "mError_Parameter_Settable" variable bit in the MP940 will be on, and "mError_Parameter_Number" will be 3, that indicates the torque limit is set out of range. The proper torque limit can be calculated by using either "Sigma II Series Servo System User's Manual" or "Sigma II Servo System Product Catalog Supplement" to obtain the peak torque and rated torque values for the motor. Divide the peak torque value by the rated torque, and then multiply that quotient by -10000. This is the setting for "sLimit_Torque" (it must be entered as a negative number). (For MotionWorks users, sLimit_Torque is the same as OWC002 register.) EXAMPLE: Motor SGMGH-20ACA61 motor has a peak torque of 254 in-lb and a rated torque of 102 in-lb. If you divide 254 by 102, the result is 2.49. Multiply this value by -10000 and the result is -24900. In MotionWorks+, enter a value of -24900 for the system variable "sTorque_Limit". When using the MP940 with a servopack, this value will always be a negative number. The following table can be used for reference: Attachments: 924KB Product Group/Line: Controllers, MP940 Machine Controller Topic/Sub Topic: Ask a Technical Question, Alarm, Specifications, Start Up - Installation, Troubleshooting Document Number: MNEN-5CJMMC Published Date: 05/02/2001 Share \| Rate Rate this article :	05/02/2001
	Does the sofware limit objects 607D:01h and 607D:02h include the home offset object 607Ch? Posted Date: 03/06/2014 Answer: No, as described in the Sigma-5 EtherCAT (CoE) User's Manual (SIEP C720829 04) section 8.7: The limit values are corrected internally by the Home Offset as follows. The target positions are compared with the corrected values. - Corrected min. position limit = min. position limit - home offset (Object 607Ch) - Corrected max. position limit = max. position limit - home offset (Object 607Ch) For example: - The application requires a home offset of -100,000 position units. - The application requires that the internal limit (bit 11 of the Statusword 6041h) should activate (become 1) when the target position (607Ah) is 5,000 position units or more above the zero (home) position. - The application requires that the internal limit (bit 11 of the Statusword 6041h) should activate (become 1) when the target position (607Ah) is 3,000 position units or more below the zero (home) position. The variables are: [Home Offset] = -100,000 [Positive limit] = 5,000 [Negative limit] = 3,000 [Minimum position limit] = 607D:01h [Maximum position limit] = 607D:02h The following procedure can be used: 1. Set home offset (Object 607Ch) to -100,000 position units. 2. Issue homing routine. When completed, the Position Actual Value will be approximately 100,000 position units. 3. Issue a move to the zero position (Target Position 607Ah should be 0 at the end of the move). [Note: Moving to zero position may be necessary to be performed prior to setting software limits in the case of Cyclic Synchronous Position Mode, since the positions commanded in that mode might be outside the software limit range.] 4. Set the Minimum position limit (607D:01h) to -103,000. (This is the calculation of: [Minimum position limit] = [Home offset] - [Negative limit]) 5. Set the Maximum position limit (607D:02h) to -95,000. (This is the calculation of: [Maximum position limit] = [Home offset] + [Positive limit]) The results will be: 1. If Position Actual Value (6064h) is 0, then Target Position 607Ah can be issued from -2,999 to 4,999 without bit 11 of the statusword changing to 1. 2. If Position Actual Value (6064h) is 0, and if Target Position 607Ah is issued lower than -2,999 or higher than 4,999, then bit 11 of the statusword will change to 1. Product Group/Line: Servo Products, SGDV EtherCAT Topic/Sub Topic: Ask a Technical Question, Parameters Document Number: MTN-9C3QSC Published Date: 03/06/2014 Share \| Rate Rate this article :	03/06/2014
	Does the Sigma-5 have a function to reduce position dither when holding position? Posted Date: 07/01/2009 Answer: The Sigma-5 vibration suppression function can suppress vibrations as low as 1 to 100 Hz generated by sources such as the machine base vibrating. The anti-resonance control adjustment function (Fn204) can reduce excitation of frequencies from 100 - 1,000 Hz. Vibration suppression combined with high encoder resolution results in very low position dithering especially during standstill. For more information on these functions, check the Sigma-5 operation manual, section 5.6-7. Product Group/Line: Servo Products, SGMAV Sigma-5, SGDV Analog, SGDV EtherCAT, SGDV MECHATROLINK-II, SGDV MECHATROLINK-III, SGDV MP2600iec, SGDV SigmaLogic Topic/Sub Topic: Ask a Technical Question, Document Clarification, Operation, Specifications Document Number: MTN-7T2SHM Published Date: 07/01/2009 Share \| Rate Rate this article :	07/01/2009
	Does the R1000 need to be purchased as a kit similar to the RC5? Posted Date: 07/15/2015 Answer: No. The R1000 and each peripheral component needed can be purchased separately. Product Group/Line: Inverter Drives, R1000 Regenerative Unit Topic/Sub Topic: Ask a Technical Question, Product Launch Document Number: INV-EU8V3U Published Date: 07/15/2015 Share \| Rate Rate this article :	07/15/2015
	Does the R1000 have a USB cable interface (instead of serial) for direct connection to a computer, and do I need anything else? Posted Date: 07/15/2015 Answer: Yes, the R1000 has a USB port for quick and easy PC Connection. Product Group/Line: Inverter Drives, R1000 Regenerative Unit Topic/Sub Topic: Ask a Technical Question, Product Launch Document Number: INV-O0O455 Published Date: 07/15/2015 Share \| Rate Rate this article :	07/15/2015
	Does the P1000 have a USB cable interface (instead of serial) for direct connection to a computer, and do I need anything else? Posted Date: 06/29/2012 Answer: Yes, like the A1000, P1000 also has a USB port on the front of the drive. Product Group/Line: Inverter Drives, P1000 Drive Topic/Sub Topic: Ask a Technical Question, Product Launch Document Number: DRV-8VQKYH Published Date: 06/29/2012 Share \| Rate Rate this article :	06/29/2012
	Does the P1000 have a functional safety (safe torque off) input? Posted Date: 06/29/2012 Answer: No, this is generally not required for fan and pump applications. In the rare cases when it is required, please use A1000. Product Group/Line: Inverter Drives, P1000 Drive Topic/Sub Topic: Ask a Technical Question, Product Launch Document Number: DRV-8VQKVY Published Date: 06/29/2012 Share \| Rate Rate this article :	06/29/2012
	Does the Modbus port on the V7 Drive need a termination resistor? Posted Date: 10/27/2005 Answer: Only the last drive (receiver) on the bus needs its 120-ohm termination resistor connected. Dipswitch SW2 section 1 connects the termination resistance between the R+ and R- terminals. The ohmeter should read about 120 ohms across the R+ and R- terminals. If very high or infinite, then no resistor is connected - check SW2 and test the ohmeter. If 60 ohms then two are connected; 40 ohms then three are connected; etc. Again, check SW2 in all the connected drives to make sure only the last drive on the network has a 120 ohm terminating resistor closed by SW2. Note: Earlier versions of the V7 Drive were named GPD 315/V7, GPD 315 or VS Mini V7. Product Group/Line: Inverter Drives, Network Comms-Modbus TCP-IP, V7 Drive, V74X Drive Topic/Sub Topic: Ask a Technical Question, Wiring Document Number: DRV-5FLM5G Published Date: 10/27/2005 Share \| Rate Rate this article :	10/27/2005
	Does the LEGEND amplifier have a circuit for a brake? Posted Date: 10/20/2006 Answer: The LEGEND Amplifier (SGDG) has been designed for high performance torque control. To improve the cost effectiveness, many I/O points and functions (including the Mechanical Brake Control Circuit) have been eliminated when compared to the SGDH. For this reason, the mechanical brake control circuit functionality must be handled in the upper controller or PLC. Product Group/Line: Servo Products, SGDG LEGEND Topic/Sub Topic: Ask a Technical Question, Operation, Specifications, Wiring Document Number: MNEN-5CJMQL Published Date: 10/20/2006 Share \| Rate Rate this article :	10/20/2006
	Does the JUSP-NS500 Profibus Network Indexing module have a GSD file? Posted Date: 06/24/2013 Answer: Yes, it is also posted on the Profibus International Web site. Please see the attached link. http://www.profibus.com/member/337/products/10558/fertig.html# Attachments: 2KB Product Group/Line: Controllers, NS500 Profibus Topic/Sub Topic: Ask a Technical Question, Network Communications, Start Up - Installation Document Number: BFAR-5CKNV7 Published Date: 06/24/2013 Share \| Rate Rate this article :	06/24/2013
	Does the GA500 have DC input voltage capability? Posted Date: 09/30/2019 Answer: Yes, the GA500 is UL rated for DC voltage input. Product Group/Line: Inverter Drives, GA500 Drive Topic/Sub Topic: Ask a Technical Question, Inputs - Outputs, Product Launch Document Number: INV-HTJPF2 Published Date: 09/30/2019 Share \| Rate Rate this article :	09/30/2019
	Does the GA500 have a copy keypad feature? Posted Date: 09/30/2019 Answer: Yes, you can copy one parameter set into the GA500’s standard LED keypad and upload that parameter set into another drive. Product Group/Line: Inverter Drives, GA500 Drive Topic/Sub Topic: Ask a Technical Question, Keypad-Operator, Product Launch Document Number: INV-7N3VNH Published Date: 09/30/2019 Share \| Rate Rate this article :	09/30/2019
	Does the GA500 automatically back up my parameters? Posted Date: 09/27/2019 Answer: The GA500 will automatically back up your parameters when using the optional JVOP-KPLCA04MEB LCD keypad or JVOP-KPLCC04MBB Bluetooth keypad. Product Group/Line: Inverter Drives, GA500 Drive Topic/Sub Topic: Ask a Technical Question, Product Launch, Parameters, Programming Document Number: INV-Q3HZDT Published Date: 09/27/2019 Share \| Rate Rate this article :	09/27/2019

Showing 871 - 900 of 1,102 results.

SAFETY PRECAUTIONS AND INSTRUCTIONS FOR USE OF FAQ INFORMATION!

Please read and understand the product instruction manual before installing, servicing or operating Yaskawa products. FAQ content and illustrations are provided as technical advice to augment the information in manual, not supersede it. It is not possible to give detailed instructions for all types of installation or support activities. The information described in the FAQs are subject to change without notice to improve the product or FAQ. Yaskawa assumes no responsibility for errors or omissions or damages resulting from the use of the information contained in any FAQ. All warnings, cautions and product instruction for product use must be followed. Installation, operation and maintenance should be carried out by qualified personnel. Failure to observe these and other precautions highlighted in the product manuals will expose the user to high voltages resulting in, serious injury or death. Qualified personnel are defined as individuals who are familiar with the installation, starting, operation and maintenance of Yaskawa products of the type described and have proper qualifications to perform the work.

Node: lr1

Rate

Support

Support & Training

Support

Repair

Field Service

Exchange

Recertified

By Product

Spare Parts

FAQs

Frequently Asked Questions

SAFETY PRECAUTIONS AND INSTRUCTIONS FOR USE OF FAQ INFORMATION!

Americas

Europe/Africa/Middle East

Japan/Asia/Pacific Rim

Support & Training

Support

Repair

Field Service

Exchange

Recertified

By Product

Spare Parts

FAQs

Repair

Field Service

Exchange

Recertified

By Product

Spare Parts

FAQs

Frequently Asked Questions

SAFETY PRECAUTIONS AND INSTRUCTIONS FOR USE OF FAQ INFORMATION!