Support

Yaskawa provides support for all of its products on a global basis. This website supports customers of Yaskawa America, Inc. - Drives & Motion Division serving North, South, and Central America. VIDEO: Aftermarket Services Overview

Solution Center
Visit the Yaskawa Solution Center, a self-service portal providing all the functionality and content needed to resolve issues immediately, 24/7. View Solution Center Quick Tips

Technical Support:

United States
Phone:1-800-YASKAWA (927-5292),
dial 2 or 1-847-887-7457, dial 2
Drives Hours: 7am-7pm (CT) M-F
Motion & CNC Hours: 8am-5pm (CT) M-F
Email: technical_support@yaskawa.com
Online: Submit Support Request

Canada, Mexico, Central and South America
View Contact Information

After Hours Emergency Support
24/7 including holidays

Yaskawa Solution Center

Experience Extra

Frequently Asked Questions

Product Group

Product

Sub-Topic

Applications

Clear

Sort by :

Expand All

Didn't find what you were looking for? Try

Showing 901 - 930 of 1,102 results.

	Question	Posted Date
	Does the FP605 have UL Type 1 end cap kits available? Posted Date: 04/06/2022 Answer: The FP605 is IP20/UL Type 1 standard through 75 HP at 240 V and 125 HP at 480 V. The FP605 IP20/Protected Chassis units do have UL Type 1 end cap kits available. View list. Product Group/Line: Inverter Drives, FP605 Topic/Sub Topic: Ask a Technical Question, Product Launch, Enclosure, Options Document Number: INV-7337YN Published Date: 04/06/2022 Share \| Rate Rate this article :	04/06/2022
	Does the FP605 have DC input voltage capability? Posted Date: 03/31/2022 Answer: Yes, the FP605 is UL rated for DC voltage input. See the FP605 Technical Reference manual for details (SIEPC7106171F). Product Group/Line: Inverter Drives, FP605 Topic/Sub Topic: Ask a Technical Question, Inputs - Outputs, Product Launch, Specifications Document Number: INV-WFCNNW Published Date: 03/31/2022 Share \| Rate Rate this article :	03/31/2022
	Does the FP605 have a landing page? Posted Date: 03/29/2022 Answer: Yes. The FP605 landing page may be found by visiting: https://www.yaskawa.com/fp605 Product Group/Line: Inverter Drives, FP605 Topic/Sub Topic: Ask a Technical Question, Product Launch Document Number: INV-1561PM Published Date: 03/29/2022 Share \| Rate Rate this article :	03/29/2022
	Does the FP605 have a copy keypad feature? Posted Date: 04/07/2022 Answer: Yes, you can copy one parameter set into the FP605’s standard LCD keypad and upload that parameter set into another drive. Product Group/Line: Inverter Drives, FP605 Topic/Sub Topic: Ask a Technical Question, Keypad-Operator, Product Launch Document Number: INV-1NK16P Published Date: 04/07/2022 Share \| Rate Rate this article :	04/07/2022
	Does the FP605 automatically back up my parameters? Posted Date: 04/07/2022 Answer: The FP605 will automatically back up your parameters when using the standard JVOP-KPLCA04MEB LCD keypad or JVOP-KPLCC04MBB Bluetooth keypad. Product Group/Line: Inverter Drives, FP605 Topic/Sub Topic: Ask a Technical Question, Keypad-Operator, Product Launch Document Number: INV-CJC883 Published Date: 04/07/2022 Share \| Rate Rate this article :	04/07/2022
	Does the D1000 need to be purchased as a kit? Posted Date: 07/15/2015 Answer: Yes. The D1000 and each peripheral component needed must be purchased together as a kit. Product Group/Line: Inverter Drives, D1000 Regenerative Converter Topic/Sub Topic: Ask a Technical Question, Product Launch Document Number: INV-AG27G9 Published Date: 07/15/2015 Share \| Rate Rate this article :	07/15/2015
	Does the D1000 have a USB cable interface (instead of serial) for direct connection to a computer, and do I need anything else? Posted Date: 07/15/2015 Answer: Yes, the D1000 has a USB port for quick and easy PC Connection. Product Group/Line: Inverter Drives, D1000 Regenerative Converter Topic/Sub Topic: Ask a Technical Question, Product Launch Document Number: INV-YXF864 Published Date: 07/15/2015 Share \| Rate Rate this article :	07/15/2015
	Does the A1000 have a USB cable interface (instead of serial) for direct connection to a computer, and do I need anything else? Posted Date: 02/29/2012 Answer: Yes, the A1000 has a USB port on the front of the drive. Product Group/Line: Inverter Drives, A1000 Drive, DriveWizard Software Topic/Sub Topic: Ask a Technical Question, Drive Wizard Document Number: DRV-8CDKMR Published Date: 02/29/2012 Share \| Rate Rate this article :	02/29/2012
	Does J1000 have UL Listing for single phase? Posted Date: 08/01/2008 Answer: Yes; all the J1000's voltage classes are UL listed. Product Group/Line: Inverter Drives, J1000 Drive Topic/Sub Topic: Ask a Technical Question, Product Launch Document Number: DRV-7H3T52 Published Date: 08/01/2008 Share \| Rate Rate this article :	08/01/2008
	Does installation of an AC Drive near a large capacitor bank (power-factor correction) require special consideration? Posted Date: 10/27/2005 Answer: Yes. Capacitors are put across the AC power line to correct for lagging power factor due to inductive loads. Motors, relay coils, transformers, etc. are inductive loads. Many times capacitors are switched on and off the line as demand changes. Unfortunately, this switching results in large voltage spikes on the power line which can damage the drives rectifier circuit. To prevent damage use a 5% line reactor on the drive's input. If overvoltage faults are indicated, add dynamic braking -- this will clamp the DC bus. Product Group/Line: Inverter Drives, E7 Drive, F7 Drive, G5 Drive 600 Volt, G5HHP Drive, G7 Drive, J7 Drive, P5 Drive 600 Volt, P7 Drive, V7 Drive, V74X Drive, V7N Drive, VS mini Drive Topic/Sub Topic: Ask a Technical Question, Harmonics Document Number: DRV-5FLM2U Published Date: 10/27/2005 Share \| Rate Rate this article :	10/27/2005
	Does GA500 offer an integrated EMC filter option? Posted Date: 09/30/2019 Answer: Yes, the GA500 offers a factory installed, integrated EMC filter version. Product Group/Line: Inverter Drives, GA500 Drive Topic/Sub Topic: Ask a Technical Question, Product Launch Document Number: INV-41J25R Published Date: 09/30/2019 Share \| Rate Rate this article :	09/30/2019
	Does each FP605 have a build-in reactor? Posted Date: 03/30/2022 Answer: Yes, every FP605 has a built-in reactor. A 5% split choke is built-in both positive and negative DC bus legs as standard for all IP20/UL Type 1, IP55/UL Type 12, and IP55/UL Type 12 with switch models. A 3% DC link on the positive BUS is provided for IP20/Protective Chassis designs. Product Group/Line: Inverter Drives, FP605 Topic/Sub Topic: Ask a Technical Question, Product Launch, Specifications Document Number: INV-B8OQTP Published Date: 03/30/2022 Share \| Rate Rate this article :	03/30/2022
	Does Compass require MotionWorks IEC Pro or Express? Posted Date: 05/21/2020 Answer: Template project requires MotionWorks IEC Pro, PLCopenPart4 support requires MP3000iec series controllers. Product Group/Line: Yaskawa Compass, Controllers Topic/Sub Topic: Software, Ask a Technical Question Document Number: CNT-N7RY5H Published Date: 05/21/2020 Share \| Rate Rate this article :	05/21/2020
	Does BACnet support more than 128 addresses? Posted Date: 05/23/2013 Answer: BACnet MS/TP master device must have an address between 1 and the Decvice Object Max_Master property, a maximum of 127. All BACnet objects must have an instance identifier that is unique within the device. The Device Object must have an instance identifier that is unique system wide. The Device Object Instance is of type BACnetObjectIndentifier and nust be a value between 1 and 4,194,302. Click on link below for instructions and example of BACnet Device Object Identifier and how its programmed. For more information, refer to AN.AFD.23. Product Group/Line: Inverter Drives, E7 Drive, E7B Drive Bypass, E7BR Package, E7C Drive Configured, E7CR Package, E7E Drive Engineered, E7L Drive Bypass, E7N Narrow Bypass Package, E7S Slim Configured Drive, Network Comms-BACnet, P7 Drive, P7B Drive Bypass, P7BR Package, P7C Drive Configured, P7CR Package, P7S Slim Configured Package Topic/Sub Topic: Ask a Technical Question, Network Communications Document Number: DRV-8WQTNC Published Date: 05/23/2013 Share \| Rate Rate this article :	05/23/2013
	Does a Sigma-7Siec write a home offset to Flash even if it is configured to use an absolute encoder motor as incremental? Posted Date: 02/11/2020 Answer: No. The Sigma-7Siec will not write to the Flash memory when the home offset is changed as long as the motor encoder is either an incremental type or an absolute type that is used while Pn002.2 = 1 (Use the encoder as an incremental encoder). Product Group/Line: SGD7S Sigma-7Siec, Servo Products Topic/Sub Topic: Ask a Technical Question Document Number: SRV-78482B Published Date: 02/11/2020 Share \| Rate Rate this article :	02/11/2020
	DEV -- Fault Code Description Posted Date: 06/08/2007 Answer: Digital Operator Display Text: DEV Speed Deviation Description: The deviation of the speed reference and speed feedback has exceeded the regulation level. A minor fault contact output can be programmed by using the multi-function outputs. Possible Cause(s): The load has changed considerably. Corrective Action: Check the load on the motor, verify the program settings (F1-10 PG Deviate Level, F1-11 PG Deviate Time. F1-04 PG Deviation Select. For information on resetting a fault on G5, E7, F7or G7 Drives, see FAQ# DRV-5P8PGJ. For more information and a complete list of fault codes see the following manuals TM4515 and PP.P5G5.01. Product Group/Line: Inverter Drives, G5HHP Drive, G5 GPD515 Drive, G5 Drive 600 Volt Topic/Sub Topic: Ask a Technical Question, Fault Code Description Document Number: DRV-5P2J95 Published Date: 06/08/2007 Share \| Rate Rate this article :	06/08/2007
	CPF23 -- Fault Code Description Posted Date: 11/16/2009 Answer: Digital Operator Display Text: CPF23 Option DPRAM Err Description: Communication Option CardInterconnection Fault. Causes:An option board is not correctly connected to the control board or an option board that is not made for the Drive is attached to the control board. Corrective Actions:Remove power to the Drive * Connect the option board once more * Perform a factory initialization * Cycle power off and on to the Drive * Replace the option board * Replace the control board. For information on resetting a fault, see FAQ# DRV-5P8PGJ. For more information and a complete list of fault codes see the following manuals TM.E7.01, TM.F7.01 and TM.P7.01. Product Group/Line: Inverter Drives, E7 Drive, E7B Drive Bypass, E7C Drive Configured, E7E Drive Engineered, E7L Drive Bypass, E7N Narrow Bypass Package, E7S Slim Configured Drive, F7 Drive, P7 Drive Topic/Sub Topic: Ask a Technical Question, Fault Code Description Document Number: DRV-5P4KHV Published Date: 11/16/2009 Share \| Rate Rate this article :	11/16/2009
	CPF23 -- Fault Code Description Posted Date: 06/08/2007 Answer: Digital Operator Display Text: CPF23 Option DPRAM Err Description: DPRAM handshake timing between the 515/G5 and a network or communication option card has timed out. Possible Cause(s): An option board is not correctly connected to the control board, an option board that is not made for the 515/G5 inverter is attached to the control board. Corrective Action: Remove power to the inverter and connect the option board once more. Perform a factory initialization , cycle power, replace the option board, replace the control board For information on resetting a fault on G5, E7, F7or G7 Drives, see FAQ# DRV-5P8PGJ. For more information and a complete list of fault codes see the following manuals TM4515 and PP.P5G5.01. Product Group/Line: Inverter Drives, G5HHP Drive, G5 GPD515 Drive, G5 Drive 600 Volt Topic/Sub Topic: Ask a Technical Question, Fault Code Description Document Number: DRV-5P2JNG Published Date: 06/08/2007 Share \| Rate Rate this article :	06/08/2007
	CPF22 -- Fault Code Description Posted Date: 06/08/2007 Answer: Digital Operator Display Text: CPF22 Option Type Err Description: DPRAM fault detected at power up. Possible Cause(s): Unrecognizable communication or network option board is connected to the control board Corrective Action: Remove any option boards and cycle power, perform a factory initialization, replace the option board, replace the control board. For information on resetting a fault on G5, E7, F7or G7 Drives, see FAQ# DRV-5P8PGJ. For more information and a complete list of fault codes see the following manuals TM4515 and PP.P5G5.01. Product Group/Line: Inverter Drives, G5HHP Drive, G5 GPD515 Drive, G5 Drive 600 Volt Topic/Sub Topic: Ask a Technical Question, Fault Code Description Document Number: DRV-5P2JM8 Published Date: 06/08/2007 Share \| Rate Rate this article :	06/08/2007
	CPF22 -- Fault Code Description Posted Date: 11/16/2009 Answer: Digital Operator Display Text: CPF22 Option Type Err Description:Communication Option Card Code Number Fault. Causes:Unrecognizable option board is connected to the control board. Corrective Actions:Remove any option boards * Cycle power off and on to the Drive * Perform a factory initialization * Replace the option board * Replace the control board. For information on resetting a fault, see FAQ# DRV-5P8PGJ. For more information and a complete list of fault codes see the following manuals TM.E7.01, TM.F7.01 and TM.P7.01. Product Group/Line: Inverter Drives, E7 Drive, E7B Drive Bypass, E7C Drive Configured, E7E Drive Engineered, E7L Drive Bypass, E7N Narrow Bypass Package, E7S Slim Configured Drive, F7 Drive, P7 Drive Topic/Sub Topic: Ask a Technical Question, Fault Code Description Document Number: DRV-5P4KB3 Published Date: 11/16/2009 Share \| Rate Rate this article :	11/16/2009
	CPF10 -- Fault Code Description Posted Date: 11/16/2009 Answer: Digital Operator Display Text: CPF10 ASIC-Err Description:ASIC Version Fault (ASIC) Causes: Control circuit damage Corrective Actions: Replace the Drives control board For information on resetting a fault, see FAQ# DRV-5P8PGJ. For more information and a complete list of fault codes see the following manuals TM.E7.01, TM.F7.01 and TM.P7.01. Product Group/Line: Inverter Drives, E7 Drive, E7B Drive Bypass, E7C Drive Configured, E7E Drive Engineered, E7L Drive Bypass, E7N Narrow Bypass Package, E7S Slim Configured Drive, F7 Drive, P7 Drive Topic/Sub Topic: Ask a Technical Question, Fault Code Description Document Number: DRV-5P4K4X Published Date: 11/16/2009 Share \| Rate Rate this article :	11/16/2009
	CPF09 -- Fault Code Description Posted Date: 11/16/2009 Answer: Digital Operator Display Text: CPF09 CPU-Er Description:CPU-ASIC Mutual Diagnosis Fault (COY) Causes:Noise or spike on the control circuit input terminals - - - Control circuit damage Corrective Actions:Cycle power off and on to the Drive - - - Replace the Drives control board. For information on resetting a fault, see FAQ# DRV-5P8PGJ. For more information and a complete list of fault codes see the following manuals TM.E7.01, TM.F7.01 and TM.P7.01. Product Group/Line: Inverter Drives, E7 Drive, E7B Drive Bypass, E7C Drive Configured, E7E Drive Engineered, E7L Drive Bypass, E7N Narrow Bypass Package, E7S Slim Configured Drive, F7 Drive, P7 Drive Topic/Sub Topic: Ask a Technical Question, Fault Code Description Document Number: DRV-5P4K2F Published Date: 11/16/2009 Share \| Rate Rate this article :	11/16/2009
	CPF08 -- Fault Code Description Posted Date: 11/16/2009 Answer: Digital Operator Display Text: CPF08 WAT-Err Description:Watchdog Timer Fault (WAT) Causes:Noise or spike on the control circuit input terminals - - - Control circuit damage Corrective Actions:Cycle power off and on to the Drive - - - Replace the Drives control board. For information on resetting a fault, see FAQ# DRV-5P8PGJ. For more information and a complete list of fault codes see the following manuals TM.E7.01, TM.F7.01 and TM.P7.01. Product Group/Line: Inverter Drives, E7 Drive, E7B Drive Bypass, E7C Drive Configured, E7E Drive Engineered, E7L Drive Bypass, E7N Narrow Bypass Package, E7S Slim Configured Drive, F7 Drive, P7 Drive Topic/Sub Topic: Ask a Technical Question, Fault Code Description Document Number: DRV-5P4JYG Published Date: 11/16/2009 Share \| Rate Rate this article :	11/16/2009
	CPF07 -- Fault Code Description Posted Date: 11/16/2009 Answer: Digital Operator Display Text: CPF07 RAM-Err Description:ASIC Internal RAM Fault (RAM) Causes:Noise or spike on the control circuit input terminals - - - Control circuit damage Corrective Actions:Cycle power off and on to the Drive - - - Replace the Drives control board. For information on resetting a fault, see FAQ# DRV-5P8PGJ. For more information and a complete list of fault codes see the following manuals TM.E7.01, TM.F7.01 and TM.P7.01. Product Group/Line: Inverter Drives, E7 Drive, E7B Drive Bypass, E7C Drive Configured, E7E Drive Engineered, E7L Drive Bypass, E7N Narrow Bypass Package, E7S Slim Configured Drive, F7 Drive, P7 Drive Topic/Sub Topic: Ask a Technical Question, Fault Code Description Document Number: DRV-5P4JPA Published Date: 11/16/2009 Share \| Rate Rate this article :	11/16/2009
	CPF06 with Replacement Control Board Posted Date: 08/28/2012 Answer: A1-03, o2-04 and A1-03 Product Group/Line: Inverter Drives, P1000 Drive Topic/Sub Topic: Ask a Technical Question, Troubleshooting Document Number: DRV-8XLRR4 Published Date: 08/28/2012 Share \| Rate Rate this article :	08/28/2012
	CPF06 -- Fault Code Description Posted Date: 06/08/2007 Answer: Digital Operator Display Text: CPF06 Option Error Description: Option connection fault. Possible Cause(s): An option board is not correctly connected to the control board, an option board that is not made for the 515/G5 inverter is attached to the control board . Corrective Action: Remove power to the inverter and connect the option board once more. Perform a factory initialization , cycle power, replace the option board, replace the control board. For information on resetting a fault on G5, E7, F7or G7 Drives, see FAQ# DRV-5P8PGJ. For more information and a complete list of fault codes see the following manuals TM4515 and PP.P5G5.01. Product Group/Line: Inverter Drives, G5HHP Drive, G5 GPD515 Drive, G5 Drive 600 Volt Topic/Sub Topic: Ask a Technical Question, Fault Code Description Document Number: DRV-5P2JJ9 Published Date: 06/08/2007 Share \| Rate Rate this article :	06/08/2007
	CPF05 -- Fault Code Description Posted Date: 06/08/2007 Answer: Digital Operator Display Text: CPF05 External A/D Err Description: CPU external A/D converter fault. Possible Cause(s): Noise or spike on the control board input terminals. Corrective Action: Perform a factory initialization , cycle power, replace the control board. For information on resetting a fault on G5, E7, F7or G7 Drives, see FAQ# DRV-5P8PGJ. For more information and a complete list of fault codes see the following manuals TM4515 and PP.P5G5.01. Product Group/Line: Inverter Drives, G5HHP Drive, G5 GPD515 Drive, G5 Drive 600 Volt Topic/Sub Topic: Ask a Technical Question, Fault Code Description Document Number: DRV-5P2JGY Published Date: 06/08/2007 Share \| Rate Rate this article :	06/08/2007
	CPF05 -- Fault Code Description Posted Date: 11/16/2009 Answer: Digital Operator Display Text: CPF05 External A/D Err Description:CPU External A/D Converter Fault. Causes:Noise or spike on the control circuit input terminals. Corrective Actions:Perform a factory initialization. Cycle power off and on to the. Drive Replace the control board. For information on resetting a fault, see FAQ# DRV-5P8PGJ. For more information and a complete list of fault codes see the following manuals TM.E7.01, TM.F7.01 and TM.P7.01. Product Group/Line: Inverter Drives, E7 Drive, E7B Drive Bypass, E7C Drive Configured, E7E Drive Engineered, E7L Drive Bypass, E7N Narrow Bypass Package, E7S Slim Configured Drive, F7 Drive, P7 Drive Topic/Sub Topic: Ask a Technical Question, Fault Code Description Document Number: DRV-5P4JJS Published Date: 11/16/2009 Share \| Rate Rate this article :	11/16/2009
	CPF04 -- Fault Code Description Posted Date: 11/16/2009 Answer: Digital Operator Display Text: CPF04 Internal A/D Err Description: CPU Internal A/D Converter Fault. Causes:Noise or spike on the control circuit input terminals. Corrective Actions:Perform a factory initialization. Cycle power off and on to the Drive. Replace the control board. For information on resetting a fault, see FAQ# DRV-5P8PGJ. For more information and a complete list of fault codes see the following manuals TM.E7.01, TM.F7.01 and TM.P7.01. Product Group/Line: Inverter Drives, E7 Drive, E7B Drive Bypass, E7C Drive Configured, E7E Drive Engineered, E7L Drive Bypass, E7N Narrow Bypass Package, E7S Slim Configured Drive, F7 Drive, P7 Drive Topic/Sub Topic: Ask a Technical Question, Fault Code Description Document Number: DRV-5P4JGG Published Date: 11/16/2009 Share \| Rate Rate this article :	11/16/2009
	CPF04 -- Fault Code Desciption Posted Date: 06/08/2007 Answer: Digital Operator Display Text: CPF04 Internal A/D Err Description: CPU internal A/D converter fault. 506 digital operator will display CPF05. Possible Cause(s): Noise or spike on the control board input terminals. Corrective Action: Perform a factory initialization , cycle power, replace the control board. For information on resetting a fault on G5, E7, F7or G7 Drives, see FAQ# DRV-5P8PGJ. For more information and a complete list of fault codes see the following manuals TM4515 and PP.P5G5.01. Product Group/Line: Inverter Drives, G5HHP Drive, G5 GPD515 Drive, P5 GPD506 Drive, P5 Drive 600 Volt, G5 Drive 600 Volt Topic/Sub Topic: Ask a Technical Question, Fault Code Description Document Number: DRV-5P2JFU Published Date: 06/08/2007 Share \| Rate Rate this article :	06/08/2007

Showing 901 - 930 of 1,102 results.

SAFETY PRECAUTIONS AND INSTRUCTIONS FOR USE OF FAQ INFORMATION!

Please read and understand the product instruction manual before installing, servicing or operating Yaskawa products. FAQ content and illustrations are provided as technical advice to augment the information in manual, not supersede it. It is not possible to give detailed instructions for all types of installation or support activities. The information described in the FAQs are subject to change without notice to improve the product or FAQ. Yaskawa assumes no responsibility for errors or omissions or damages resulting from the use of the information contained in any FAQ. All warnings, cautions and product instruction for product use must be followed. Installation, operation and maintenance should be carried out by qualified personnel. Failure to observe these and other precautions highlighted in the product manuals will expose the user to high voltages resulting in, serious injury or death. Qualified personnel are defined as individuals who are familiar with the installation, starting, operation and maintenance of Yaskawa products of the type described and have proper qualifications to perform the work.

Node: lr1

Rate

Support

Support & Training

Support

Repair

Field Service

Exchange

Recertified

By Product

Spare Parts

FAQs

Frequently Asked Questions

SAFETY PRECAUTIONS AND INSTRUCTIONS FOR USE OF FAQ INFORMATION!

Americas

Europe/Africa/Middle East

Japan/Asia/Pacific Rim

Support & Training

Support

Repair

Field Service

Exchange

Recertified

By Product

Spare Parts

FAQs

Repair

Field Service

Exchange

Recertified

By Product

Spare Parts

FAQs

Frequently Asked Questions

SAFETY PRECAUTIONS AND INSTRUCTIONS FOR USE OF FAQ INFORMATION!