HMI Movicon Basic Programming

Back
Class Name/Number: HMI Movicon Basic Programming / TRM010-HMI-Movicon_Basic
View Related Curriculum
Class Location: Waukegan, IL
Class Cost: $490
Start Date/Time: 10/08/2020 - 10/09/2020
8:30am - 5pm CST
View Related Dates

Class Topics:
This live training class is designed for engineers and technicians who want to learn how to design basic HMI screens using the Movicon HMI Editor. The student will be guided through the creation of a new HMI project of increasing complexity. The HMI communicates to the pre-configured and programmed MPiec controller using the PLCi protocol.

Duration:
2.0 Days

Class Topics:
This live training class is designed for engineers and technicians who want to learn how to design basic HMI screens using the Movicon HMI Editor. The student will be guided through the creation of a new HMI project of increasing complexity. The HMI communicates to the pre-configured and programmed MPiec controller using the PLCi protocol.

Class topics include but are not limited to:

  • Project Overview
  • System Setup
  • Project Layout
  • Header Bar
  • Navigation Bar
  • Control Panel
  • Maintenance Screen
  • Manual Screen
  • Production Screen
  • Recipe Screen
  • Alarm Screen
  • User Management
  • Symbols


Class Materials:
Students will receive a copy of the class training manual, as well as selected product user and instruction materials in paper and/or electronic format.

Social Distancing During Training Classes:

Yaskawa America, Technical Training Services follows the Center for Disease Control’s (CDC’s) recommendation of social distancing at least six feet during factory training classes held at the Yaskawa America facilities in Waukegan, IL and Cypress, CA. To meet these recommendations, we’ve physically rearranged the classrooms and limited the number of students enrolled in the class.

Students must adhere to Yaskawa’s safety protocol for mask or face shield utilization in all Yaskawa training facilities. Students must bring with them and wear during the class, a face mask or face shield that has been approved by the CDC for COVID-19 face protection.

Safety:
Yaskawa TTS provides a number of training classes for its customers that require the use of low level voltages (120vac, 208vac and 460vac). To ensure a level of safety for the student while working with training class equipment using these voltages, TTS follows an Arc Flash Policy that is consistent with NFPA 70E.

Each student attending the class must wear non-melting, untreated, natural fiber long pants.

Prerequisites:
Please watch the smartPanel HMI Quickstart eLearning video.

Yaskawa maintains a continually growing eLearning Curriculum. It’s online and it’s free. Navigate to the product page, or search YouTube for training videos applicable to this product. Subscribe to Yaskawa's YouTube Channel for the latest training videos. The eLearning Curriculum is a valuable resource both before and after attending this training class.

If you’re not sure if this class is right for you, call the Technical Training Services at 1-800-YASKAWA (927-5292) dial 4.

Class Format:
This class runs from 8:30am to 5:00pm on each day, with a one-hour lunch and two 15-minute breaks. The class consists of approximately 10% lecture and 90% hands-on exercises.

Class Cost:
Contact training@yaskawa.com for pricing. The fee that you will be charged includes all training documents, a light snack each morning and a lunch each day. Costs associated with travel, lodging, and evening meals are not included and are the student’s responsibility.

Continuing Education Units:
Continuing Education Units will be awarded to those students that attend this training class in its entirety and pass the certification test with a score of 90% or better. Yaskawa does not provide partial CEU credits for less than 100% attendance. As an IACET Accredited Provider, Yaskawa America Inc. offers CEUs for its programs that qualify under the ANSI/IACET Standard. Yaskawa America, Inc. is accredited by IACET to offer 1.4 CEUs for this program.

To Enroll:
To enroll in any class, email training@yaskawa.com. Please have a PO ready when you call. Class sizes are limited, so call early to reserve your seat. PO must be net 30 days.

Cancellation Policy:
Yaskawa reserves the right to cancel a scheduled class at any time due to low student enrollment. In this situation the student will be asked to reschedule or the tuition cost will be refunded. Yaskawa is not liable for any charges incurred by the customer (i.e.; airline, hotel, and rental car) due to cancellation.

A student may cancel their enrollment more than one week before the start of the class with no penalty. A student wishing to cancel their enrollment within one week of the class start date will be subject to these charges:

  • The cancellation fee for end users, if canceling within one week for a scheduled factory class is 50% of the total class tuition fee.
  • The cancellation fee for Drives and Motion Distributors, if canceling within one week of a scheduled factory training class is 100% of the total tuition fee.
  • The cancellation fee for end users and distributors, if canceling an on-site class within three weeks of a scheduled class date is 50% of the class tuition and logistical fees.