Z1000 Bypass Hands-on Troubleshooting
|Class Name/Number:|| Z1000 Bypass Hands-on Troubleshooting / TRM030-Z1000BYPASS-HOTS |
View Related Curriculum
|Class Location:||Waukegan, IL|
|Start Date/Time:|| 03/31/2020 - 04/02/2020 |
8:30am - 5:00pm CST
View Related Dates
Overview Video: https://youtu.be/5EUdWr1JvEE
Duration: 3 Days
This class is designed for technicians and engineers who need to know the basic theory and steps for troubleshooting Yaskawa’s Z1000 bypass. The student will learn to troubleshoot the Z1000 Bypass by first learning to read the elementary diagram. Then learning what the fault code is indicating as the problem. And finally, the student will learn the applicable procedures using test equipment to identify the bad components in the Z1000 bypass.
Class topics include but are not limited to:
- Overview of Bypass Schematic
- Main Power and Control Wiring to the Drive and Bypass
- Keypad Navigation
- Elementary Diagram Walkthrough
- Component Naming
- Component Functions
- Checks without Power
- Checks with Power
- Fault Code Troubleshooting
- Component Troubleshooting
- Flashing Firmware
- Sabotage Exercise
Students will receive a copy of the class training manual as well as selected product user and instruction manuals in paper and/or electronic format.
Yaskawa TTS provides a number of training classes for its customers that require the use of low-level voltages (120vac, 208vac, and 460vac). To ensure a level of safety for the student while working with training class equipment using these voltages, TTS follows an Arch Flash Policy that is consistent with NFPA 70E.
Each student attending the class must wear non-melting, untreated, natural fiber long pants.
At least some prior experience programming any of Yaskawa’s 1000 series of Drives (A1000, V1000, P1000, Z1000 non-bypass).You should also possess a basic knowledge of motors and inverters.
If you're not sure if this class is right for you, call and speak with one of Yaskawa's Product Training Engineers at 1-800-YASKAWA (927-5292) dial 4.
This class runs from 8:30 to 5:00 pm each day, with a one-hour lunch and two 15-minute breaks. The class consists of approximately 20% lecture and 80% hands-on exercises. Special emphasis is placed on the hands-on portion of this class.
Continuing Education Units:
Continuing Education Units will be awarded to those students that attend this training class in its entirety and pass the certification test with a score of 85% or better. Yaskawa does not provide partial CEU credits for less than 100% attendance. As an IACET Accredited Provider, Yaskawa America Inc. offers CEUs for its programs that qualify under the ANSI/IACET Standard. Yaskawa America, Inc. is accredited by IACET to offer 2.1 CEUs for this program.
Contact Yaskawa for pricing at 1-800-YASKAWA (927-5292) dial 4. The fee that you will be charged includes all training documents, a continental breakfast each morning, and a lunch each day. Costs associated with travel, lodging, and evening meals are not included and are the student's responsibility.
To enroll in any class, call Technical Training Services at 1-800-YASKAWA (927-5292) dial 4. Please have a PO ready when you call. Class sizes are limited, so call early to reserve your seat. PO must be Net 30 days.
Yaskawa reserves the right to cancel a scheduled class at any time due to low student enrollment. In this situation, the student will be asked to reschedule or the tuition cost will be refunded. Yaskawa is not liable for any charges incurred by the customer (i.e.; airline, hotel, and rental car) due to cancellation.
A student may cancel their enrollment more than one week before the start of the class with no penalty. A student wishing to cancel their enrollment within one week of the class start date will be subject to these charges:
- The cancellation fee for end users, if canceling within one week for a scheduled factory class is 50% of the total class tuition fee.
- The cancellation fee for Drives and Motion Distributors, if canceling within one week of a scheduled factory training class is 100% of the total tuition fee.
- The cancellation fee for end users and distributors, if canceling an on-site class within three weeks of a scheduled class date is 100% of the class tuition and logistical fees.