FAQ: Why does an MP2600iec get alarm 3407 010C “10Mbps Ethernet not supported” after it is power cycled?
Breadcrumb
Contact Us
contactUsAction
When an MP2600iec drops the Ethernet connection to a PC due to a power cycle, some PC’s set their Ethernet connection to 10mbps. When the MP2600iec re-establishes the Ethernet connection, it detects the 10mbps connection and it creates an alarm because the MP2600iec does not support 10mbps connections. After this alarm occurs, the PC cannot communicate to the MP2600iec.
To avoid this alarm, always use an Ethernet switch or hub when connecting a PC to an MP2600iec.
If using an Ethernet switch or hub is not an option, the connection can be recovered by unplugging the Ethernet cable and then plugging it back in.
SAFETY PRECAUTIONS AND INSTRUCTIONS FOR USE OF FAQ INFORMATION!
Please read and understand the product instruction manual before installing, servicing or operating Yaskawa products. FAQ content and illustrations are provided as technical advice to augment the information in manual, not supersede it. It is not possible to give detailed instructions for all types of installation or support activities. The information described in the FAQs are subject to change without notice to improve the product or FAQ. Yaskawa assumes no responsibility for errors or omissions or damages resulting from the use of the information contained in any FAQ. All warnings, cautions and product instruction for product use must be followed. Installation, operation and maintenance should be carried out by qualified personnel. Failure to observe these and other precautions highlighted in the product manuals will expose the user to high voltages resulting in, serious injury or death. Qualified personnel are defined as individuals who are familiar with the installation, starting, operation and maintenance of Yaskawa products of the type described and have proper qualifications to perform the work.
Phone
If you have an urgent request, please call: 1-800-YASKAWA (927-5292) or 1-847-887-7000.Electronically
To contact us electronically, please select your type of request and complete the form.Yaskawa America, Inc. - Drives & Motion Division
2121 Norman Drive South
Waukegan, IL 60085