FAQ: How is the error “The application image could not be bound to the kernel firmware profile!” corrected?
Breadcrumb
Contact Us
contactUsAction
When the resource dialog is opened, this error is shown if the project was compiled with build settings that are greater than the firmware build on the controller, and a function block is included in the project that is newer or has newer behavior than the firmware. For example if the program was compiled with build settings of MP3300iec 3.5.0 and the controller firmware is 3.3.0, and the project contains a function block that was added or modified since version 3.3.0. To correct the issue, recompile with equal (recommended) or lower build settings. Build settings are found by right clicking on the “Resource” node in the “Physical Hardware” section of the tree and selecting “Settings”.
SAFETY PRECAUTIONS AND INSTRUCTIONS FOR USE OF FAQ INFORMATION!
Please read and understand the product instruction manual before installing, servicing or operating Yaskawa products. FAQ content and illustrations are provided as technical advice to augment the information in manual, not supersede it. It is not possible to give detailed instructions for all types of installation or support activities. The information described in the FAQs are subject to change without notice to improve the product or FAQ. Yaskawa assumes no responsibility for errors or omissions or damages resulting from the use of the information contained in any FAQ. All warnings, cautions and product instruction for product use must be followed. Installation, operation and maintenance should be carried out by qualified personnel. Failure to observe these and other precautions highlighted in the product manuals will expose the user to high voltages resulting in, serious injury or death. Qualified personnel are defined as individuals who are familiar with the installation, starting, operation and maintenance of Yaskawa products of the type described and have proper qualifications to perform the work.
Phone
If you have an urgent request, please call: 1-800-YASKAWA (927-5292) or 1-847-887-7000.Electronically
To contact us electronically, please select your type of request and complete the form.Yaskawa America, Inc. - Drives & Motion Division
2121 Norman Drive South
Waukegan, IL 60085