FAQ: Is it possible to Monitor/Program an MP9** Product over a phone line from a remote location?
Breadcrumb
Contact Us
contactUsAction
Yes, SixNet Modems have been tested and allow monitoring and program editing/downloading to an MP920/MP930/MP940 over a phone line. The following methods are possible:
Method 1: Remote PC running MW or MW+ --> Modem --> Phone Line --> Modem --> On Site PC running MW or MW+ --> MP940
In this case, any modem will work. PC operating system must be Win95 or Win98
See file Remote_Service.pdf below for setup details.
Method 2: Remote PC running MW or MW+ --> Modem --> Phone Line --> Modem --> MP940 directly
In this case, an 11bit modem must be used, such as SixNet
See file RemoteServicePC_Modem_MP940.pdf
Setup files for the modem and hyperterminal are included in the attached zip: 11bitmodem.zip
An informational specification sheet for the SixNet Industrial 11bit modem is also attached for reference: SixNet_VTModemSpecs.pdf
SAFETY PRECAUTIONS AND INSTRUCTIONS FOR USE OF FAQ INFORMATION!
Please read and understand the product instruction manual before installing, servicing or operating Yaskawa products. FAQ content and illustrations are provided as technical advice to augment the information in manual, not supersede it. It is not possible to give detailed instructions for all types of installation or support activities. The information described in the FAQs are subject to change without notice to improve the product or FAQ. Yaskawa assumes no responsibility for errors or omissions or damages resulting from the use of the information contained in any FAQ. All warnings, cautions and product instruction for product use must be followed. Installation, operation and maintenance should be carried out by qualified personnel. Failure to observe these and other precautions highlighted in the product manuals will expose the user to high voltages resulting in, serious injury or death. Qualified personnel are defined as individuals who are familiar with the installation, starting, operation and maintenance of Yaskawa products of the type described and have proper qualifications to perform the work.
Phone
If you have an urgent request, please call: 1-800-YASKAWA (927-5292) or 1-847-887-7000.Electronically
To contact us electronically, please select your type of request and complete the form.Yaskawa America, Inc. - Drives & Motion Division
2121 Norman Drive South
Waukegan, IL 60085