FAQ: How is an auxiliary IP address set on the controller?
Breadcrumb
Contact Us
contactUsAction
How is an auxiliary IP address set on the controller?
Answer:
On controller firmware 3.2.0 ~ 3.4.0, go to the “Ethernet Config” page under setup after logging into the controller’s web page. Click on the + sign to the right of the Auxiliary IP label. The + sign becomes an X and a 2 fields are created, one for the auxiliary IP address and one for the subnet mask. Enter the IP address and mask and hit the + button on the IP address line to finish adding it. The final step is to press save at the top right to save the results.
Product Group/Line:
MP2000iec Series, Controllers, MP2300Siec, MP2310iec, MP2600iec, MP3200iec, MP3300iec, Sigma-7Siec
Topic/Sub Topic:
Ask a Technical Question, Instructions
Document Number:
CNT-3Z7S46
Published Date:
01/17/2018
Phone
If you have an urgent request, please call: 1-800-YASKAWA (927-5292) or 1-847-887-7000.Electronically
To contact us electronically, please select your type of request and complete the form.Yaskawa America, Inc. - Drives & Motion Division
2121 Norman Drive South
Waukegan, IL 60085
Node: dxpprd02:8080