SMC-3010 LEGEND-MC

FAQs

Sort by :

Didn't find what you were looking for? Try

Showing 81 - 100 of 1,000 results.

	Question	Posted Date
	Where does the GA800 fit into Yaskawa's family of drives, and what does it offer beyond the A1000? Posted Date: 01/09/2019 Answer: The GA800 is Yaskawa's new general purpose, high-performance industrial drive. Over time, it will take the place of the A1000. The GA800 brings higher performance, greater flexibility, and increased ease of use including mobile device tools. Also, refer to document PC.GA800.01 for a high-level side-by-side comparison. Product Group/Line: Inverter Drives, GA800 Drive, GA800 Configured Topic/Sub Topic: Ask a Technical Question, Product Launch Document Number: INV-X11101 Published Date: 01/09/2019 Share \| Rate Rate this article :	01/09/2019
	Where does the GA500 fit into Yaskawa's family of drives? Posted Date: 09/26/2019 Answer: The GA500 will be a complement to the GA800 as a high-performance, compact, and economical microdrive. Product Group/Line: Inverter Drives, GA500 Drive Topic/Sub Topic: Ask a Technical Question, Product Launch Document Number: INV-WOO444 Published Date: 09/26/2019 Share \| Rate Rate this article :	09/26/2019
	Where does the FP605 fit into Yaskawa's family of drives? Posted Date: 03/29/2022 Answer: The FP605 will be a complement to the GA800 with specialized features suited to the industrial fan and pump market. Product Group/Line: Inverter Drives, FP605 Topic/Sub Topic: Ask a Technical Question, Product Launch Document Number: INV-M5JTUP Published Date: 03/29/2022 Share \| Rate Rate this article :	03/29/2022
	Where does the A1000 fit into Yaskawa's family of drives, and what does it offer beyond the F7? Posted Date: 01/03/2011 Answer: The A1000 is Yaskawa's general purpose, high performance drive. It takes the place of the F7, but brings higher performance, flexibility, and extended life. Product Group/Line: Inverter Drives, A1000 Drive Topic/Sub Topic: Ask a Technical Question, Product Launch Document Number: DRV-8CCTAM Published Date: 01/03/2011 Share \| Rate Rate this article :	01/03/2011
	Where can pin out details for the YS-12 cable be found? Posted Date: 07/13/2004 Answer: The attached drawing contains the full details on this serial (RS232) data transfer cable. The following parts will be needed to make this cable: 1) Standard 9 pin female D shell connector (PC side). 2) 24 AWG x 2 pair, 300V shielded cable. 3) Qty. 1 of Yaskawa p/n YSC-1 (mates to 3CN on SGDH, or the 6CN or 7CN when used with Application Modules). YSC-1 consists of 3M p/n's 10114-300VE (connector) + 10314-52A0-008 (shell). This part may also be found through other suppliers. If it is necessary only to increase the length of the cable (and not to build the cable from scratch), a popular option is to buy the YS-12 cable and build a serial "extension" cable. The extension cable is not Yaskawa specific and can thus be used in other RS232 communication applications. Note: Recommended maximum cable length for error free data transfer is 15 meters (50 feet). Longer cables are made at your own risk! Attachments: 1.0MB Product Group/Line: Servo Products, SGDH Sigma II Topic/Sub Topic: Ask a Technical Question, Wiring Document Number: MNEN-5CJMHC Published Date: 07/13/2004 Share \| Rate Rate this article :	07/13/2004
	Where can I find UL certification documents for Yaskawa MPiec Controller products? Posted Date: 06/12/2014 Answer: Certification is listed on Underwriter's Laboratories' web site (www.ul.com) Please see the attached for instructions on how to find on www.ul.com. Attachments: 2KB 101KB Product Group/Line: Controllers, Servo Products, MP2000iec Series, MP3200iec, SGDV MP2600iec, MP2300Siec, MP2310iec, MP2600iec Topic/Sub Topic: Ask a Technical Question, Specifications Document Number: MTN-9DSRUN Published Date: 06/12/2014 Share \| Rate Rate this article :	06/12/2014
	Where can I find the supporting documents for UL approval of the MP2000 controllers? Posted Date: 02/04/2011 Answer: UL has what they call their "yellowcard" which is their listing of all the products that are UL Recognized or Listed in a given file. This information is available online by searching for the appropriate file number in UL's online certifications directory at: http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.html The file number is E184524. Product Group/Line: Controllers, MP2000 Series (MP2300-MP2200), MP2000iec Series, MP2300, MP2300Siec, MP2310iec Topic/Sub Topic: Ask a Technical Question, Specifications Document Number: MTN-8DQTB6 Published Date: 02/04/2011 Share \| Rate Rate this article :	02/04/2011
	Where can I find frequently asked questions for MV1000? Posted Date: 03/31/2015 Answer: Please refer to the related document FAQ.MV1000.01. Product Group/Line: Inverter Drives, MV1000 Drive Topic/Sub Topic: Ask a Technical Question, 3-Level Control, Drive Size, Drive Software, Enclosure, Hardware, Harmonics, Instructions, Glossary, Operation Document Number: INV-K8DMP1 Published Date: 03/31/2015 Related Files: MV1000 Frequently Asked Questions Share \| Rate Rate this article :	03/31/2015
	Where can I find electrical and mechanical drawings? Posted Date: 03/26/2021 Answer: The drawings can be found at. Electrical Mechanical Product Group/Line: Inverter Drives, U1000 Industrial Configured Topic/Sub Topic: Ask a Technical Question, Product Launch Document Number: INV-4372W5 Published Date: 03/26/2021 Share \| Rate Rate this article :	03/26/2021
	Where can Error Code Descriptions be found for SigmaLogic? Posted Date: 10/20/2014 Answer: All error codes will appear at the MCFG_Yaskawa AOI. There are separate fields for servopack alarms, controller alarms and application error codes. For a more verbose description, look in the controller tags at 'AxisRef'.I.AlarmText. Refer to the attached screenshot. Attachments: 19KB Product Group/Line: Servo Products, SGDV SigmaLogic, SigmaLogic Software Package Topic/Sub Topic: Ask a Technical Question, Software, Troubleshooting Document Number: SRV-ACNCRW Published Date: 10/20/2014 Share \| Rate Rate this article :	10/20/2014
	Where are the help files located for SigmaLogic, LogicWorks and Add-on Instructions (AOI)? Posted Date: 10/09/2014 Answer: Use F1 key help on any page of LogicWorks software to display HTML help within LogicWorks software. Use this link for eLearning Videos for SigmaLogic: https://www.yaskawa.com/products/motion/sigma-5-servo-products/software-tools/sigmalogic-software-package/-/content/_06903ec5-97d4-450d-b696-389ed37128bd_eLearningCurriculum The help for Add-On Instructions is available by right clicking on the AOI itself and selecting Instruction Help or by pressing F1 key after clicking on the AOI. Product Group/Line: Servo Products, SGDV SigmaLogic, SigmaLogic Software Package, SGMAV Sigma-5, SGMCS Direct Drive, SGMGV Sigma-5, SGMJV Sigma-5, SGMMV Sigma-5 Mini, SGMSV Sigma-5, SGMVV Sigma-5 Topic/Sub Topic: Ask a Technical Question, Software, Instructions, Training Document Number: CNT-SRV-G81I13 Published Date: 10/09/2014 Share \| Rate Rate this article :	10/09/2014
	When will single phase input capacities be available for P1000 and what kind of derating is expected? Posted Date: 06/29/2012 Answer: Single phase input capacities are provided in A1000 / P1000 supplement TOEPYEASUP03 (available online), and will be included in a future revision of the P1000 technical manual. Product Group/Line: Inverter Drives, P1000 Drive Topic/Sub Topic: Ask a Technical Question, Product Launch Document Number: DRV-8VQKSB Published Date: 06/29/2012 Share \| Rate Rate this article :	06/29/2012
	When will single phase input capacities be available for A1000 and what kind of derating is expected? Posted Date: 01/03/2011 Answer: Single phase input capacities are provided in supplement TOEPYEASUP03 (available online), and will be included in a future revision of the A1000 technical manual. Product Group/Line: Inverter Drives, A1000 Drive Topic/Sub Topic: Ask a Technical Question, Specifications Document Number: DRV-8CDSKY Published Date: 01/03/2011 Share \| Rate Rate this article :	01/03/2011
	When will a heatsink through the back solution be available, and what enclosure rating will it be capable of? Posted Date: 11/29/2011 Answer: The Z1000 has a sealed heatsink which allows for the drive to be mounted in a NEMA 12 enclosure with the heatsink external. Product Group/Line: Inverter Drives, Z1000 Drive Topic/Sub Topic: Ask a Technical Question, Product Launch Document Number: DRV-8P2QCC Published Date: 11/29/2011 Share \| Rate Rate this article :	11/29/2011
	When using the analog output function on a GPD506/P5, how is the output scaled when output current is selected? Posted Date: 06/12/2014 Answer: The 0-10Vdc output is scaled to 0-100% of the drive rated current. Parameter n052 is used to setup the drive for output current monitoring and n053 sets the analog monitor gain value. For example, if the user wants 0V= 0% and 3V=100%, then use formula n053= Desired voltage @ 100% drive output rating/ 10V. For the above example, n053= 0.3 (See graph attached). There is other related information on this FAQ, refer to TM4506. Attachments: 26KB Product Group/Line: Inverter Drives, P5 GPD506 Drive, P5 Drive 600 Volt Topic/Sub Topic: Ask a Technical Question, Programming Document Number: DRV-5K3NJW Published Date: 06/12/2014 Share \| Rate Rate this article :	06/12/2014
	When using SMC-2000 analog input, where is the ground (common) signal connected? Posted Date: 05/22/2001 Answer: The SMC-2000 analog I/O (I/O1 connector) uses the same ground reference as the internal 5V (control logic) power supply. Therefore, any 5V ground connection (such as AE1-pin23 or AE2-pin23) can be used as a ground reference for the analog input. It should be noted that the analog I/O is optically isolated from the 24V digital I/O. Product Group/Line: Controllers, SMC-2000 Topic/Sub Topic: Ask a Technical Question, Specifications, Wiring Document Number: MNEN-5CJMPW Published Date: 05/22/2001 Share \| Rate Rate this article :	05/22/2001
	When using SigmaWin software, what are the units when graphing torque? Posted Date: 07/13/2004 Answer: When using a matched Servo Pack / Servo Motor combination (eg. SGDH-05xx, SGMGH-05xxxxx) the units are percentage of rated torque. Sigma II allows (for emergency situations) operation of the Servo Pack / Servo Motor combinations of up two times larger or one-half smaller. This affects the units of the torque monitor by displaying the percentage of rated torque for the lowest rated component. For example: If an SGDH-05xx and an SGMGH-09xxxxx were combined, the display units would be percentage of rated torque (current) for the SGDH-05xx. If an SGDH-10xx and an SGMGH-05xxxxx were combined, the display units would be percentage of rated torque (current) for the SGMGH-05xxxxx. Product Group/Line: Servo Products, SGDH Sigma II, SigmaWin100-200 Software Topic/Sub Topic: Ask a Technical Question, Document Clarification, Operation Document Number: MMIR-5KCKFN Published Date: 07/13/2004 Share \| Rate Rate this article :	07/13/2004
	When using MotionWorks IEC ver3.3.0, how can the error message “Library does not exist” be avoided when saving the Hardware Configuration? Posted Date: 01/27/2017 Answer: There are two cases when this may occur. If the library cannot be found on the PC or if the library is marked as open. See attached document for instructions. Attachments: 134KB 114KB Product Group/Line: MotionWorks IEC, Controllers, MP2000iec Series, MP2300Siec, MP2310iec, MP2600iec, MP3200iec, MP3300iec, Sigma-7Siec Topic/Sub Topic: Customer Support, Programming, Ask a Technical Question, Installation, Maintenance Document Number: CNT-X33W02 Published Date: 01/27/2017 Share \| Rate Rate this article :	01/27/2017
	When using MotionWorks+, is there a way to tell which version of a project is currently in the RAM memory of the MP940 and the last date it was revised? Posted Date: 07/13/2004 Answer: If revision data is needed, it can be managed by generating three CONSTANTS in the MW+ project file: Year, MonthDay, and RevisionNumber. This technique is a common practice among MW+ programmers to consistently maintain revisions. Constant Definitions: "Year": Assign to the initial value of this constant, the year the project was downloaded. "MonthDay": Assign to the initial value of this constant the month and the day the project was downloaded. If the project was downloaded on March 17th , the constant would be 3.17 "Project": Project Number.Revision level - If project number 176 with a revision level of 4 is in the memory, the constant value would be assigned as 176.004 Assign the appropriate data to the initial value to these three constants. By using the data monitoring feature in MW+, the revision number can be seen. Using this method, it is important to remember to change the revision data manually every time a significant change to the project is made. There is no automatic update. To retain each revision, be sure to save any changes as a new project. Product Group/Line: Controllers, MotionWorks Plus Software, MP940 Machine Controller Topic/Sub Topic: Ask a Technical Question, Applications, Programming Document Number: MNEN-5CJMHU Published Date: 07/13/2004 Share \| Rate Rate this article :	07/13/2004
	When using DriveWizard HVAC on a Z1000 Bypass do I connect to the Z1000 Drive or the Electronic Bypass Contol PCB? Posted Date: 05/23/2013 Answer: Always connect and configure the Z1000 Bypass thru the Electronic Bypass Contol PCB. Product Group/Line: Inverter Drives, DriveWizard HVAC, DriveWizard Software, Z1000 Bypass, Z1000 Configured, Z1000 Drive Topic/Sub Topic: Ask a Technical Question, Drive Wizard Document Number: DRV-92JM8Q Published Date: 05/23/2013 Share \| Rate Rate this article :	05/23/2013

Showing 81 - 100 of 1,000 results.

SAFETY PRECAUTIONS AND INSTRUCTIONS FOR USE OF FAQ INFORMATION!

Please read and understand the product instruction manual before installing, servicing or operating Yaskawa products. FAQ content and illustrations are provided as technical advice to augment the information in manual, not supersede it. It is not possible to give detailed instructions for all types of installation or support activities. The information described in the FAQs are subject to change without notice to improve the product or FAQ. Yaskawa assumes no responsibility for errors or omissions or damages resulting from the use of the information contained in any FAQ. All warnings, cautions and product instruction for product use must be followed. Installation, operation and maintenance should be carried out by qualified personnel. Failure to observe these and other precautions highlighted in the product manuals will expose the user to high voltages resulting in, serious injury or death. Qualified personnel are defined as individuals who are familiar with the installation, starting, operation and maintenance of Yaskawa products of the type described and have proper qualifications to perform the work.

Node: lr2

Rate