Building Automation
Water and Pumping
Packaging
Food and Beverage
Material Handling
Semiconductor
Oil, Gas and Petroleum
Rubber and Plastics
Machine Tool
Photovoltaics
Elevators and Escalators
Mining
SGMCS Direct Drive
6-600 Nm peak torque, high inertia
The SGMCS servomotor line is designed for direct drive applications where the load is directly attached to the motor surface. Pre-tapped mounting holes and a hollow-through shaft permit a variety of machine designs. This direct drive motor has substantial load carrying bearings, low speed windings, and 1,048,576 ppr absolute encoders. 200 volt windings are available with maximum speeds up to 500 rpm. There are 17 sizes available with up to 5,310 lb-in (600 Nm) of peak torque.
Brochure
Core ManualsSpecifications
Small Capacity
| Specification | Description |
|---|---|
| Time Rating | Continuous |
| Thermal Class | A |
| Vibration | V15 |
| Withstand Voltage | 1500VAC 1 min |
| Insulation Resistance | 10MW minimum at 500VDC |
| Enclosure | Totally-enclosed, self-cooled |
| Ambient Humidity | 20 to 80% (non-condensing) |
| Excitation | Permanent magnet |
| Drive Method | Direct drive |
| Mounting | Flange-mounted |
| Enclosure Rating | IP42 |
| Ambient Temperature | 0 to 40ºC |
Medium Capacity
| Specification | Description |
|---|---|
| Time Rating | Continuous |
| Thermal Class | F |
| Vibration | V15 |
| Withstand Voltage | 1500VAC 1 min |
| Insulation Resistance | 10MW minimum at 500VDC |
| Enclosure | Totally-enclosed, self-cooled |
| Ambient Humidity | 20 to 80% (non-condensing) |
| Excitation | Permanent magnet |
| Drive Method | Direct drive |
| Mounting | Flange-mounted |
| Enclosure Rating | IP42 |
| Ambient Temperature | 0 to 40ºC |
Node: lr2
