VS mini Drive

FAQs

Didn't find what you were looking for? Try
  Question Posted Date

Should motor cable length be a concern when installing an AC drive?, Is it ok to have a motor 300ft from the drive?

06/12/2014

In troubleshooting LF fault the manual says the output current has exceeded 5% imbalance. How can I calculate this imbalance?

04/01/2014

Do the remaining models fit in the same physical space as the discontinued models?

04/21/2014

Does Yaskawa manufacture 115VAC single-phase drives for 3 phase motor operation?

06/20/2013

Does installation of an AC Drive near a large capacitor bank (power-factor correction) require special consideration?

10/27/2005

Are there any CIMR-XCBMA0P10s left in stock? Are there any CIMR-XCBMA0P40s left in stock?

04/21/2014

Are common multimeters able to measure the correct output voltage of the VFD?

04/01/2014

Are any plug-in options available for the VS mini?

04/21/2014

SAFETY PRECAUTIONS AND INSTRUCTIONS FOR USE OF FAQ INFORMATION!

Please read and understand the product instruction manual before installing, servicing or operating Yaskawa products. FAQ content and illustrations are provided as technical advice to augment the information in manual, not supersede it. It is not possible to give detailed instructions for all types of installation or support activities. The information described in the FAQs are subject to change without notice to improve the product or FAQ. Yaskawa assumes no responsibility for errors or omissions or damages resulting from the use of the information contained in any FAQ. All warnings, cautions and product instruction for product use must be followed. Installation, operation and maintenance should be carried out by qualified personnel. Failure to observe these and other precautions highlighted in the product manuals will expose the user to high voltages resulting in, serious injury or death. Qualified personnel are defined as individuals who are familiar with the installation, starting, operation and maintenance of Yaskawa products of the type described and have proper qualifications to perform the work.