SMC-3010 LEGEND-MC

SMC-3010 LEGEND-MC - YAI

Single-axis motion controller

The SMC-3010 LEGEND-MC is a legacy product and no longer promoted in the Americas. The SMC-3010 series was a single-axis machine controller with Ethernet communcation that attached to any Yaskawa LEGEND amplifier. Featured 100% digital design, multi-axis control via software, dual programming screens, and high performance and reliability.

User Manual

TemplateWeb

FAQs

Sort by :

Expand All

Didn't find what you were looking for? Try solutioncenter.yaskawa.com

Showing 401 to 410 of 1,000 entries.

Previous Page
Page1
Intermediate Pages
- Page2
- Page3
- Page4
- Page5
- Page6
- Page7
- Page8
- Page9
- Page10
- Page11
- Page12
- Page13
- Page14
- Page15
- Page16
- Page17
- Page18
- Page19
Page40
Page41
Page42
Intermediate Pages
- Page43
- Page44
- Page45
- Page46
- Page47
- Page48
- Page49
- Page50
- Page51
- Page52
- Page53
- Page54
- Page55
- Page56
- Page57
- Page58
- Page59
- Page60
- Page61
- Page62
Page100
Next Page

Question	Posted Date
What additional FP605 ratings are planned for the future, and what is the schedule? Posted Date: 03/30/2022 Answer: 480 V, 700 to 1000 HP is planned. Schedule has not yet been determined. 480 V, 12-Pulse is planned. Schedule has not yet been determined. 240/480 V IP55 backside (Flange) drives are planned. Schedule has not been determined. 600 V up to at least 500 HP is planned. Schedule has not yet been determined. Product Group/Line: Inverter Drives, FP605 Topic/Sub Topic: Ask a Technical Question, Product Launch Document Number: INV-OJS7RD Published Date: 03/30/2022 Share \| Rate Rate this article :	03/30/2022
What about UL Type enclosed packages? Posted Date: 05/14/2020 Answer: At product release, UL Type 1, UL Type 12, and UL Type 3R enclosure packages will be available in 208 V, 240 V, and 480 V models with a limited range of options with new, smaller dimensions. Product Group/Line: Inverter Drives, HV600 Enclosed Bypass, HV600 Enclosed Configured, HV600 Drive Topic/Sub Topic: Ask a Technical Question, Product Launch Document Number: INV-C041H6 Published Date: 05/14/2020 Share \| Rate Rate this article :	05/14/2020
What A1000 enclosure types are available? Posted Date: 01/03/2011 Answer: NEMA 1 is the standard offering up to 200-240V 75HP ND, 380-480V 150HP ND, and 500-600V 100HP ND; IP00 protected chassis versions are available above those ratings. The standard product can be mounted conventionally, or with its heatsink external (with addition of NEMA 1 external heatsink kit for small drives); however, for installations requiring both NEMA 12 and heatsink external, the A1000 is offered in a special 'Flange' model that provides NEMA 12 integrity on its backside. Product Group/Line: Inverter Drives, A1000 Drive Topic/Sub Topic: Ask a Technical Question, Enclosure Document Number: DRV-8CDJW7 Published Date: 01/03/2011 Share \| Rate Rate this article :	01/03/2011
We have two raycap options (7 & 9). When would I use option 7 verses option 9? Posted Date: 05/13/2021 Answer: Raycap option 9 is specifically intended for 480 VAC WYE secondary transformer power. When not using this type of power supply use raycap option 7. Product Group/Line: Inverter Drives, U1000 Industrial Configured Topic/Sub Topic: Ask a Technical Question, Power Quality, Product Launch Document Number: INV-4218SG Published Date: 05/13/2021 Share \| Rate Rate this article :	05/13/2021
UV -- Fault Code Description Posted Date: 06/08/2007 Answer: Digital Operator Display Text: Uv (blinking) Description: UV (Main circuit low voltage) Main circuit DC voltage drops below the low-voltage detection level while the drive output is OFF. 230V: Stops at main circuit DC voltage below appox. 200V (160 for singelphase) 460V: Stops at main circuit DC voltage below approx. 400V. Causes and Corrective Actions: Check the following: * Power supply voltage * Main circuit power supply wiring is connected. * Terminal screws are securely tightened. A complete list of fault codes is available in the instruction manual. Find the TM.V7.01 manual on the Yaskawa website. Product Group/Line: Inverter Drives, V7 Drive Topic/Sub Topic: Ask a Technical Question, Fault Code Description Document Number: DRV-5P3H6A Published Date: 06/08/2007 Share \| Rate Rate this article :	06/08/2007
UV -- Fault Code Description Posted Date: 06/08/2007 Answer: Digital Operator Display Text: UV DC Bus Undervolt Description: The main circuit or control circuit voltage has fallen below the under voltage trip point momentarily. A minor fault contact output can be programmed by using the multi-function outputs. (GPD515/G5 only) Possible Cause(s): Single phase condition on the input, low input voltage at L1, L2, and L3. Corrective Action: Check the three phase input voltage, verify setting of L2-05 for GPD515/G5. For more information and a complete list of fault codes see the following manuals TM4515 and PP.P5G5.01. Product Group/Line: Inverter Drives, G5 GPD515 Drive, P5 GPD506 Drive, P5 Drive 600 Volt, G5 Drive 600 Volt Topic/Sub Topic: Ask a Technical Question, Fault Code Description Document Number: DRV-5P2L6Y Published Date: 06/08/2007 Share \| Rate Rate this article :	06/08/2007
UV3 -- Fault Code Description Posted Date: 11/16/2009 Answer: Digital Operator Display Text: UV3 MC Answerback Description: Soft Charge Circuit Fault. The pre-charge contactor opened while the Drive was running. Causes: Contacts on the soft charge contactor are dirty and the soft charge contactor does not function mechanically. Corrective Actions: Cycle power off and on to the Drive - - - Check the condition of the soft charge contactor - - - Repair or replace the Power PCB/Gate Drive PCB. For information on resetting a fault, see FAQ# DRV-5P8PGJ. For more information and a complete list of fault codes see the following manuals TM.E7.01, TM.F7.01 and TM.P7.01. Product Group/Line: Inverter Drives, E7 Drive, E7B Drive Bypass, E7C Drive Configured, E7E Drive Engineered, E7L Drive Bypass, E7N Narrow Bypass Package, E7S Slim Configured Drive, F7 Drive, P7 Drive Topic/Sub Topic: Ask a Technical Question, Fault Code Description Document Number: DRV-5P4QFF Published Date: 11/16/2009 Share \| Rate Rate this article :	11/16/2009
UV3 - Fault Code Description Posted Date: 06/20/2013 Answer: Digital Operator Display Text: UV3 MC Answerback Description: The pre-charge contactor opened while the inverter is running. This fault only applies to 230 V units 18kW ~ 75kW, 460 V units 22kW ~ 160kW and 600 V units 30kW ~ 160kW Possible Cause(s): Contacts on contactor are dirty, contactor does not function mechanically Corrective Action: Check the contactor, check the ribbon cable from the control board to the gate drive board. For information on resetting a fault on G5, E7, F7or G7 Drives, see FAQ# DRV-5P8PGJ. For more information and a complete list of fault codes see the following manuals TM4515, TM4506 and PP.P5G5.01. Product Group/Line: Inverter Drives, G5 GPD515 Drive, P5 GPD506 Drive, P5 Drive 600 Volt, G5 Drive 600 Volt Topic/Sub Topic: Ask a Technical Question, Fault Code Description Document Number: DRV-5NZR3T Published Date: 06/20/2013 Share \| Rate Rate this article :	06/20/2013
UV2 -- Fault Code Description Posted Date: 06/08/2007 Answer: Digital Operator Display Text: Uv2 Description: UV2 (Control power supply fault) Voltage fault of control power supply is detected. Causes and Corrective Actions: Cycle power. If the fault remains. replace the drive. A complete list of fault codes is available in the V7 instruction manual. Find the manual on the Yaskawa website. Product Group/Line: Inverter Drives, V74X Drive, V7N Drive, V7 Drive Topic/Sub Topic: Ask a Technical Question, Fault Code Description Document Number: DRV-5P3PNQ Published Date: 06/08/2007 Share \| Rate Rate this article :	06/08/2007
UV2 -- Fault Code Description Posted Date: 11/16/2009 Answer: Digital Operator Display Text:UV2 CTL PS Undervolt Description: Control Power Supply Undervoltage. Undervoltage of the control circuit when running. Causes: External load connected pulling down the Drive power supplies Corrective Actions: Cycle power off and on to the Drive - - - Repair or replace the Power PCB/Gate Drive PCB - - - Remove all control wiring and test Drive. For information on resetting a fault, see FAQ# DRV-5P8PGJ. For more information and a complete list of fault codes see the following manuals TM.E7.01, TM.F7.01 and TM.P7.01. Product Group/Line: Inverter Drives, E7 Drive, E7B Drive Bypass, E7C Drive Configured, E7E Drive Engineered, E7L Drive Bypass, E7N Narrow Bypass Package, E7S Slim Configured Drive, F7 Drive, P7 Drive Topic/Sub Topic: Ask a Technical Question, Fault Code Description Document Number: DRV-5P4QCZ Published Date: 11/16/2009 Share \| Rate Rate this article :	11/16/2009

Showing 401 to 410 of 1,000 entries.

Previous Page
Page1
Intermediate Pages
- Page2
- Page3
- Page4
- Page5
- Page6
- Page7
- Page8
- Page9
- Page10
- Page11
- Page12
- Page13
- Page14
- Page15
- Page16
- Page17
- Page18
- Page19
Page40
Page41
Page42
Intermediate Pages
- Page43
- Page44
- Page45
- Page46
- Page47
- Page48
- Page49
- Page50
- Page51
- Page52
- Page53
- Page54
- Page55
- Page56
- Page57
- Page58
- Page59
- Page60
- Page61
- Page62
Page100
Next Page

SAFETY PRECAUTIONS AND INSTRUCTIONS FOR USE OF FAQ INFORMATION!

Please read and understand the product instruction manual before installing, servicing or operating Yaskawa products. FAQ content and illustrations are provided as technical advice to augment the information in manual, not supersede it. It is not possible to give detailed instructions for all types of installation or support activities. The information described in the FAQs are subject to change without notice to improve the product or FAQ. Yaskawa assumes no responsibility for errors or omissions or damages resulting from the use of the information contained in any FAQ. All warnings, cautions and product instruction for product use must be followed. Installation, operation and maintenance should be carried out by qualified personnel. Failure to observe these and other precautions highlighted in the product manuals will expose the user to high voltages resulting in, serious injury or death. Qualified personnel are defined as individuals who are familiar with the installation, starting, operation and maintenance of Yaskawa products of the type described and have proper qualifications to perform the work.

Node: dxpprd02:8080

Rating

Rate

SiteSearch

Yaskawa Main Navigation