Z1000U Matrix Configured

Keypads & Cables

This array of option cards can extend the flexibility and adaptability of Yaskawa AC drives. Factory mounted and wired options are provided within configured packages or custom engineered packages.

Keypad Options Keypad Kit #
& Mounting Location
Installation Guide
UL Rated Remote Operator / Mounting Kit
This option provides all you will need to remotely mount the drive's Digital Operator to the door/wall of a separately priced, oversized UL Type 1, 3R, 4, 4X, or 12 enclosure (IPX6 environment). This kit includes: One JVOP-183R Digital Operator providing RTC, HOA, and outdoor rated LCD display, a faceplate bezel with digital operator brackets and membrane to cover the operator cutout in the enclosure door, a 3-foot cable, a 10-foot cable, and a 1:1 template for cutting the necessary cutouts in the enclosure. Mounting hardware is included. Keypad can be removed after kit installation. Connects to RJ-45 port and mounts to enclosure wall.
UOP000019 (Blank Faceplate Membrane)
Mounts to RJ-45 port and enclosure door
TOEPYEAOPT02
UOP000017 (Yaskawa Logo Faceplate Membrane)
Mounts to RJ-45 port and enclosure door
LCD Digital Operator
This option is the standard digital operator found on the drive. This option is only required if the original digital operator is lost or damaged. If used as a remote operator, the standard digital operator may be used, but then requires Installation Set A (EZZ020642A) for panel or door mounting and Remote Operator Cable (UWR0051 or UWR0052), each sold separately.
 
UOP000016 Kit Contents:
Qty
Description
1
LCD Digital Operator
1
Installation Manual (TOEPC71061645)
UOP000016
(JVOP-183)
RJ-45 Keypad Port
TOEPC71061645

 

Operators Model Number & Mounting Location Installation Guide & Technical Manual
Operator Kits, UL Type 3R/4X
This option is used to extend an LCD or LED Digital Remote Operator to the wall of a separately priced, oversized UL Type 3R, 4, 4X, or 12 enclosure(IPX6 environment). Price includes a faceplate bezel with digital operator brackets and membrane to cover the operator cutout in the enclosure door, a 3-foot cable, a 10-foot cable, and a 1:1 template for cutting the necessary cutouts in the enclosure. Keypad can be removed after kit installation. Designed for use with 1000 series Digital Remote Operators (sold separately). Connects to RJ-45 port and mounts to enclosure wall.
UUX000526 (Blank Membrane)

TOEPYEAOPT02

Keypad Template ( UDM00236)

UUX000527 (Yaskawa Logo Membrane)

 

USB Copy Unit (Y-Stick) Model Number & Mounting Location Installation Guide & Technical Manual
USB Copy UnitUSB Copy Unit (Y-Stick)
This option allows the drive to connect to the USB port on a PC. It can read, copy and verify drive parameter settings from one drive to another like drive. The unit plugs into the RJ-45 port on the front of the digital operator.
 
JVOP-181 Kit Contents:
Qty
Description
1
USB Copy Unit (Y-Stick)
1
1 ft USB Cable to connect PC to Y-Stick
1
3 ft Cable with RJ-45 connector on both ends to connect Y-Stick to drive
1
Technical Manual (TOBPC73060025)

Driver: SP1824_001
Note: This driver is required to be installed on the PC before the Y-stick can be used.
JVOP-181
RJ-45 Keypad Port
IG.V1000.01

TOBPC73060025
CopyUnitManager PC Software
CopyUnitManager is a PC software program that works along with the Y-Stick Copy Unit (JVOP-181) that allows the user to transfer and save parameter files from the Y-Stick to a PC and vice versa. The CopyUnitManager software can be used to save parameter files for a variety of drive sizes and parameter configurations. Simply configure the drive parameters, transfer them to the Y-Stick Copy Unit, then save them to your PC for backup or for quickly downloading multiple drives.

Download Software

System Requirements
  • PC: PC/AT DOS/V Compatible machine
  • CPU: Pentium II Processor 2GHz, 3GHz or more recommended
  • Memory: 512MB, 1GB or more recommended
  • Hard Disk Capacity: More than 400MB
  • Operating System: WindowsXP SP2, Windows2000 SP4

 

Cables Model Number
Operator Cable, Remote
These cables are used to connect the Remote Digital Operator (JVOP-18_). They are available in one (1) or three (3) meter lengths.
UWR0051 (1m),
UWR0052 (3m)
USB Interface Cable
This 10-foot male USB-A to male USB-B cable provides a USB-to-USB connection from PC to the drive.
UWR-0638
Flash Write Cable
This 6-foot cable connects a PC's 9-pin serial port to the drive's keypad port for updating the drive's firmware, flashing with custom firmware, or updating a network communication option board. It is used with the Flash Tool feature of the DriveWizard® HVAC software.
UWR-01076-1
PC Interface Cable
This 6-foot cable interconnects the drive keypad port to the 9-pin communication port on a PC. This cable is used in conjunction with DriveWizard® HVAC software.
UWR00468-2