SMC-3010 LEGEND-MC
Breadcrumb
Navigation Menu
SMC-3010 LEGEND-MC
SMC-3010 LEGEND-MC
SMC-3010 LEGEND-MC - YAI
Single-axis motion controller
The SMC-3010 LEGEND-MC is a legacy product and no longer promoted in the Americas. The SMC-3010 series was a single-axis machine controller with Ethernet communcation that attached to any Yaskawa LEGEND amplifier. Featured 100% digital design, multi-axis control via software, dual programming screens, and high performance and reliability.
TemplateWeb
FAQs
Showing 81 to 100 of 1,000 entries.
Question | Posted Date | |
---|---|---|
Where do I install the input/output option cards when using the FP605 bypass package? Posted Date: 02/17/2023
|
02/17/2023 | |
Where does the P1000 fit into Yaskawa's family of drives, and what does it offer beyond the P7? Posted Date: 06/29/2012 |
06/29/2012 | |
Where does the GA800 fit into Yaskawa's family of drives, and what does it offer beyond the A1000? Posted Date: 01/10/2019
|
01/10/2019 | |
Where does the GA500 fit into Yaskawa's family of drives? Posted Date: 09/26/2019 |
09/26/2019 | |
Where does the FP605 fit into Yaskawa's family of drives? Posted Date: 03/29/2022 |
03/29/2022 | |
Where does the A1000 fit into Yaskawa's family of drives, and what does it offer beyond the F7? Posted Date: 01/03/2011
|
01/03/2011 | |
Where can pin out details for the YS-12 cable be found? Posted Date: 07/13/2004
|
07/13/2004 | |
Where can I find UL certification documents for Yaskawa MPiec Controller products? Posted Date: 06/12/2014
|
06/12/2014 | |
Where can I find the supporting documents for UL approval of the MP2000 controllers? Posted Date: 02/04/2011
|
02/04/2011 | |
Where can I find frequently asked questions for MV1000? Posted Date: 03/31/2015
|
03/31/2015 | |
Where can I find electrical and mechanical drawings? Posted Date: 03/26/2021
|
03/26/2021 | |
Where can Error Code Descriptions be found for SigmaLogic? Posted Date: 10/20/2014
|
10/20/2014 | |
Where are the help files located for SigmaLogic, LogicWorks and Add-on Instructions (AOI)? Posted Date: 10/09/2014
|
10/09/2014 | |
When will single phase input capacities be available for P1000 and what kind of derating is expected? Posted Date: 06/29/2012
|
06/29/2012 | |
When will single phase input capacities be available for A1000 and what kind of derating is expected? Posted Date: 01/03/2011
|
01/03/2011 | |
When will a heatsink through the back solution be available, and what enclosure rating will it be capable of? Posted Date: 11/29/2011
|
11/29/2011 | |
When using the analog output function on a GPD506/P5, how is the output scaled when output current is selected? Posted Date: 06/12/2014
|
06/12/2014 | |
When using SMC-2000 analog input, where is the ground (common) signal connected? Posted Date: 05/22/2001
|
05/22/2001 | |
When using SigmaWin software, what are the units when graphing torque? Posted Date: 07/13/2004
|
07/13/2004 | |
When using MotionWorks IEC ver3.3.0, how can the error message “Library does not exist” be avoided when saving the Hardware Configuration? Posted Date: 01/27/2017
|
01/27/2017 | |
Showing 81 to 100 of 1,000 entries.
SAFETY PRECAUTIONS AND INSTRUCTIONS FOR USE OF FAQ INFORMATION!
Please read and understand the product instruction manual before installing, servicing or operating Yaskawa products. FAQ content and illustrations are provided as technical advice to augment the information in manual, not supersede it. It is not possible to give detailed instructions for all types of installation or support activities. The information described in the FAQs are subject to change without notice to improve the product or FAQ. Yaskawa assumes no responsibility for errors or omissions or damages resulting from the use of the information contained in any FAQ. All warnings, cautions and product instruction for product use must be followed. Installation, operation and maintenance should be carried out by qualified personnel. Failure to observe these and other precautions highlighted in the product manuals will expose the user to high voltages resulting in, serious injury or death. Qualified personnel are defined as individuals who are familiar with the installation, starting, operation and maintenance of Yaskawa products of the type described and have proper qualifications to perform the work.