Products

U1000 Industrial Configured

Print

Power

 

Option Option Code Letter Availability Description
65 kAIC Circuit Breaker
C
 Type 1 Type 3R This option provides a circuit breaker with operating handle and an Interrupting Capacity of 65 kA. Type 3R uses a lockable input circuit breaker.
Output Reactor
K
 Type 1 Type 3R No form of output impedance is normally required. A 5% load reactor, option (K), is available if additional output impedance is desired (usually for long lead-lengths or noise reduction).
Surge Suppressor
2
 Type 3R This option will offer some degree of protection from transient surges coming through the power line cables. Lightning strikes are the most common source of surges. This option is only available for the Type 3R enclosure.
Space Heater
3
 Type 3R This option helps reduce condensation.
50°C Ambient
4
 Type 3R This option will allow the enclosure to be operated in ambient temperature of 50°C (122°F).
Motor Terminals
8
 Type 3R Allows for lug free installation of motor wires to minimize installation time and cost.
Raycap Surge Suppressor
7
 Type 3R This option provides a high degree of protection from transient surges coming through the power line cables. Lightning strikes are the most common form of surges.
480V Y Raycap Suppressor
9
 Type 3R

This option provides a high degree of protection from power line transient surges. Lightning strikes are the most common form of surges. This option is designed specifically for 480V Y transformer secondary power to the U1000 iQpump Drive package.
Note: 75 HP and smaller units will be limited to 42 kAIC SCCR when this option is included.