USA
Search
Login
SMC-3010 LEGEND-MC
SMC-3010 LEGEND-MC
Single-axis motion controller
The SMC-3010 LEGEND-MC is a legacy product and no longer promoted in the Americas. The SMC-3010 series was a single-axis machine controller with Ethernet communcation that attached to any Yaskawa LEGEND amplifier. Featured 100% digital design, multi-axis control via software, dual programming screens, and high performance and reliability.
FAQs
| Question | Posted Date | |
|---|---|---|
|
What Control Methods does the V1000 offer? |
07/27/2007 | |
|
What control methods does the P1000 offer? |
06/29/2012 | |
|
What control methods does the A1000 offer? |
01/04/2011 | |
|
What communications networks are included and available in the HV600? |
09/03/2019 | |
|
What communication networks are available for the FP605? |
04/06/2022 | |
|
What changes must be made in the program when switching from a 218IF-01 (JAPMC-CM2300-E) card to a 218IF-02 (JAPMC-CM2302-E) card on the MP2000 series controller platform? |
03/10/2015 | |
|
What causes ‘CPU Status: Stopped’ and how can it be fixed? |
09/12/2014 | |
|
What causes the MPiec Controller’s WebUI to report "Not a valid firmware file" when uploading a firmware? |
06/13/2016 | |
|
What causes the MotionWorks IEC error message "The project cannot be downloaded because it was compiled for a different device or a different version of the connected device. Please select the device version in the Resource Settings Dialog that matches the connected device." |
09/13/2018 | |
|
What causes FLT_BSY output to come on at a SigmaLogic AOI block? |
09/15/2014 | |
SAFETY PRECAUTIONS AND INSTRUCTIONS FOR USE OF FAQ INFORMATION!
Please read and understand the product instruction manual before installing, servicing or operating Yaskawa products. FAQ content and illustrations are provided as technical advice to augment the information in manual, not supersede it. It is not possible to give detailed instructions for all types of installation or support activities. The information described in the FAQs are subject to change without notice to improve the product or FAQ. Yaskawa assumes no responsibility for errors or omissions or damages resulting from the use of the information contained in any FAQ. All warnings, cautions and product instruction for product use must be followed. Installation, operation and maintenance should be carried out by qualified personnel. Failure to observe these and other precautions highlighted in the product manuals will expose the user to high voltages resulting in, serious injury or death. Qualified personnel are defined as individuals who are familiar with the installation, starting, operation and maintenance of Yaskawa products of the type described and have proper qualifications to perform the work.
